18-8 stainless steel spacers have good corrosion resistance.

These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.

Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

These metric washers hold up in blistering temperatures up to 3000° F.

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

As you tighten a bolt, these metric washers flatten to add tension to the threaded joint and prevent loosening from small amounts of vibration.

Also known as NORD-LOCK® washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

These washers are rated to withstand pressure up to 100 psi.

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.