18-8 stainless steel spacers have good corrosion resistance.

The anodized coating on these lightweight spacers provides increased abrasion resistance over uncoated aluminum.

These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.

Also known as saddle washers, the curved end fits against round objects such as tube and pipe.

SAE washers generally have a smaller ID and OD than USS washers.

These washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Low moisture absorption and good heat resistance make these washers suitable for wet and harsh environments.

These washers hold up in blistering temperatures up to 3000° F.

The extra-tall sleeve extends into holes to provide more protection than other rolled-collar washers.

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

Square washers fit into slots and channels and have flat sides to keep them from rotating.

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Steel washers provide a stronger bearing surface than plastic washers

Use the angled edges to hold and align tie-down straps.

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.

Made of durable material, these washers resist wear from rubbing and scraping surfaces.

These washers withstand harsh chemicals such as acetic acid and isopropyl alcohol.

These wool felt washers can be soaked with oil to lubricate joints.