Search Results
Acetal SpacersAdhesive SpacersAdjustable SpacersArbor SpacersBearing SpacersBolt SpacersBumper SpacersChrome-Plated SpacersCircuit Board SpacersCoved SpacersDIN-Rail SpacersFlanged Ceramic SpacersFlanged Shoulder SpacersFlanged SpacersFood Industry SpacersInsulating SpacersLathe Chuck SpacersMachinery SpacersMade-to-Order SpacersMetal SpacersMilling Machine Arbor SpacersOuter Rim SpacersPlastic Bumper SpacersPlastic SpacersPress-Fit SpacersPTFE SpacersRound SpacersRubber SpacersSanitary SpacersScrew SpacersShaft SpacersShim SpacersShoulder Bolt SpacersShoulder SpacersSlotted Unthreaded SpacersSnap-In SpacersSpacer AssortmentsSplit SpacersSquare SpacersStainless Steel SpacersStainless Steel Unthreaded Round SpacersStandard Unthreaded SpacersSteel SpacersThreaded SpacersUnthreaded Aluminum SpacersUnthreaded Brass SpacersUnthreaded Metal SpacersUnthreaded Metric SpacersUnthreaded Nylon SpacersUnthreaded Plastic SpacersUnthreaded Spacers
Angled SpacersCaptive SpacersClearance SpacersClinch SpacersCurved SpacersSaddle SpacersThrough-Hole SpacersUnthreaded Round Spacers
Unthreaded Steel SpacersWashdown SpacersClear All
System of Measurement System of Measurement |
|---|
|
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
OD OD |
|---|
ID ID |
|---|
For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
 | Thrust |
Bearing Type Bearing Type |
|---|
 | Plain |
Lubrication Lubrication |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
For Shaft Type For Shaft Type |
|---|
 | Round |
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Lubrication Method Lubrication Method |
|---|
|
Lubricant Lubricant |
|---|
|
Shaft Mount Type Shaft Mount Type |
|---|
| Slip Fit |
About Plain Bearings
More
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron.
Iron-copper bearings support heavier loads than SAE 863 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Iron-Copper Bearings
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/4"Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 7/8" | 1/2" | 2,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 000000 |
| 7/8" | 5/8" | 2,950 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 7/8" | 3/4" | 3,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 7/8" | 1" | 4,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 15/16" | 1/2" | 2,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 1/2" | 2,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 3/4" | 3,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 1" | 4,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 1 1/4" | 5,950 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 1 1/2" | 7,150 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1" | 2" | 9,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/8" | 3/4" | 3,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 7/8"Shaft Dia. | |||||||
| 1" | 5/8" | 2,950 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1" | 1" | 4,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/8" | 1 1/2" | 7,150 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 1" | 4,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1"Shaft Dia. | |||||||
| 1 1/8" | 3/4" | 3,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/8" | 1 1/2" | 7,150 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 3/4" | 3,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 1" | 4,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 1 1/4" | 5,950 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 1 1/2" | 7,150 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 2 1/2" | 11,900 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 3" | 14,300 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 1/8"Shaft Dia. | |||||||
| 1 1/4" | 1" | 9,000 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 3/8" | 1" | 9,000 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 1/4"Shaft Dia. | |||||||
| 1 1/2" | 1/2" | 4,750 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/2" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/2" | 2" | 19,050 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/2" | 2 1/2" | 23,850 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 3/8"Shaft Dia. | |||||||
| 1 5/8" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 5/8" | 1 1/2" | 14,300 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 1/2"Shaft Dia. | |||||||
| 1 3/4" | 5/8" | 5,950 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 3/4" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 3/4" | 1 1/2" | 14,300 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 3/4" | 2" | 19,050 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 2" | 1 1/2" | 14,300 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 3/4"Shaft Dia. | |||||||
| 2" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 2" | 2" | 19,050 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 2"Shaft Dia. | |||||||
| 2 1/4" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 2 1/4" | 2" | 19,050 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron.
Iron-copper bearings support heavier loads than SAE 863 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Iron-Copper Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
| 7/8" | 1/2" | 1 1/8" | 1/8" | 2,350 lbs. @ 60 rpm | 2,300 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 000000 |
| 1" | 3/4" | 1 1/4" | 3/16" | 3,550 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 1" | 1 1/4" | 3/16" | 4,750 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 1 1/4" | 1 1/4" | 3/16" | 5,950 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
| 1" | 1 1/2" | 1 1/4" | 3/16" | 7,150 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||||||
| 1 1/4" | 3/4" | 1 1/2" | 1/8" | 3,550 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 1" | 1 1/2" | 1/8" | 4,750 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 7,150 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 3/8" | 1" | 1 5/8" | 3/16" | 4,750 lbs. @ 60 rpm | 3,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||||||
| 1 1/2" | 1" | 1 3/4" | 3/16" | 9,500 lbs. @ 30 rpm | 6,400 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | 1 3/4" | 3/16" | 14,300 lbs. @ 30 rpm | 6,400 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 1/2" | 1 3/4" | 1 3/4" | 3/16" | 16,700 lbs. @ 30 rpm | 6,400 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||||||
| 1 3/4" | 1 1/2" | 2" | 3/16" | 14,300 lbs. @ 30 rpm | 6,550 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 5/8" Shaft Dia. | ||||||||||
| 2" | 2" | 2 1/4" | 3/16" | 19,050 lbs. @ 30 rpm | 8,050 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | ||||||||||
| 2 1/4" | 2 1/2" | 3" | 1/4" | 23,850 lbs. @ 30 rpm | 14,800 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 2" Shaft Dia. | ||||||||||
| 2 1/4" | 2" | 2 1/2" | 1/8" | 19,050 lbs. @ 30 rpm | 6,750 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
High-Load Oil-Embedded Thrust Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron.
Iron-copper bearings support heavier loads than SAE 863 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Iron-Copper Bearings
| OD | Thick. | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 1/16" | 980 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 00000 |
For 3/8" Shaft Dia. | |||||||
| 3/4" | 1/16" | 1,050 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 3/4" | 1/8" | 1,050 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
| 3/4" | 1/16" | 780 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1" | 1/16" | 1,400 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1" | 3/32" | 1,400 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1" | 1/8" | 1,400 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 9/16" Shaft Dia. | |||||||
| 1 1/4" | 1/16" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1 1/4" | 1/8" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
| 1" | 1/16" | 2,250 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1" | 1/8" | 2,250 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 1/16" | 3,200 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 3/32" | 3,200 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 1/8" | 3,200 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/4" | 1/16" | 3,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
| 1 1/4" | 1/16" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/4" | 1/8" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/8" | 1/8" | 3,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 9/16" | 3/32" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/4" | 1/8" | 5,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 7/8" Shaft Dia. | |||||||
| 1 1/2" | 1/16" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1" Shaft Dia. | |||||||
| 1 1/2" | 1/16" | 3,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 3,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2" | 1/8" | 5,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1 1/4" Shaft Dia. | |||||||
| 2" | 1/16" | 9,100 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2" | 1/8" | 9,100 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1 1/2" Shaft Dia. | |||||||
| 2 1/2" | 1/8" | 12,000 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 3 9/16" | 9/32" | 21,950 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | |||||||
| 2 5/8" | 1/8" | 10,900 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 2" Shaft Dia. | |||||||
| 3" | 1/8" | 12,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)