3/4"-10 Spacers | McMaster-Carr

Filter by

System of Measurement

Material

Hex Length

Gender

Thread Length

Hex Size

Length

For Adapting

Finish

Shape

Nut Type

Tensile Strength

20,000 psi to 49,999 psi

50,000 psi to 99,999 psi

Hardness

Thread Type

Thread Fit

Unified Standard Class 2A

Unified Standard Class 2B

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Compliant with Exemptions

Specifications Met

Drive Style

Width

Thread Direction

78 Products

Inch-to-Inch Female Hex Thread Adapters

Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench. The threads on these adapters have various sizes and spacing, so you can increase or decrease thread size or adapt from coarse to fine threading. You can also use them to change the gender of a connection from male to female. Small adapters can work as threaded standoffs, which position and separate circuit boards and other components in assemblies.

Black-Oxide Steel—Black-oxide steel adapters have a finish that won’t chip or rub off. They match the aesthetics of many systems and resists rust in indoor and dry environments.

Zinc-Plated Steel—Zinc-plated steel adapters resist corrosion until the plating wears away and are often used in dry environments.

Aluminum—Aluminum adapters are about one third of the weight of steel adapters and resist corrosion in wet environments.

18-8 Stainless Steel—18-8 stainless steel adapters withstand wet environments but will corrode when exposed to salt water and other chloride solutions.

316 Stainless Steel—316 stainless steel adapters are ideal in wet environments and will not corrode when exposed to salt water or harsh chemicals.

ASTM A108, ASTM A276, ASTM A582, ASTM B211, and ASTM B633—Adapters that meet ASTM specifications are made from or plated with materials that adhere to specific standards for chemical and physical properties, such as hardness.

			Thread Lg.		Thread Fit		Hex								Each
	Thread Size (A)	Thread Size (B)	(A)	(B)	(A)	(B)	Size	Length	Specs. Met	Tensile Strength, psi	Hardness	Certificate Form	Certificate Type		1-9	10-Up
Black-Oxide Steel



		1/2"-13	3/4"-10	1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM A108	Not Rated	Rockwell B65	—	—	91072A334	00000	00000


		5/8"-11	3/4"-10	5/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2"	ASTM A108	Not Rated	Rockwell B65	—	—	91072A335	0000	0000


		Zinc-Plated Steel



				1/2"-13	3/4"-10	1/2"	41/64"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A108, ASTM B633	75,000	Rockwell B65	—	—	97088A225	0000	0000


				5/8"-11	3/4"-10	5/8"	41/64"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A108, ASTM B633	75,000	Rockwell B65	—	—	97088A230	0000	0000
				3/4"-10	7/8"-9	3/4"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	1 3/4"	ASTM A108, ASTM B633	75,000	Rockwell B65	—	—	97088A240	0000	0000
				3/4"-10	1"-8	3/4"	55/64"	Unified Standard Class 2B	Unified Standard Class 2B	1 3/8"	2"	ASTM A108, ASTM B633	75,000	Rockwell B65	—	—	97088A245	00000	00000
				3/4"-10	1 1/4"-7	3/4"	1 1/16"	Unified Standard Class 2B	Unified Standard Class 2B	1 5/8"	3"	ASTM A108, ASTM B633	75,000	Rockwell B65	—	—	97088A250	00000	00000


				Aluminum



						3/8"-16	3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM B211	45,000	Rockwell B56	—	—	91072A292	0000	0000


						3/8"-24	3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM B211	45,000	Rockwell B56	Digital	Material Certificate with Traceable Lot Number	91072A296	0000	0000
						1/2"-13	3/4"-10	1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM B211	45,000	Rockwell B56	—	Material Certificate with Traceable Lot Number	91072A304	0000	0000
						1/2"-20	3/4"-10	1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM B211	45,000	Rockwell B56	—	—	91072A307	0000	0000
						1/2"-28	3/4"-10	1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM B211	45,000	Rockwell B56	—	—	91072A309	0000	0000
						5/8"-11	3/4"-10	5/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2"	ASTM B211	45,000	Rockwell B56	—	—	91072A311	0000	0000
						3/4"-10	3/4"-16	3/4"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	2"	ASTM B211	45,000	Rockwell B56	—	—	91072A313	00000	00000


						18-8 Stainless Steel



								3/8"-16	3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A582	85,000	Rockwell B80	—	—	98434A115	0000	0000


								3/8"-24	3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A582	85,000	Rockwell B80	—	—	91072A173	00000	00000
								3/8"-32	3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A582	85,000	Rockwell B80	—	—	91072A178	00000	00000
								1/2"-13	3/4"-10	1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM A582	85,000	Rockwell B80	—	—	98434A117	00000	00000
								1/2"-20	3/4"-10	1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM A582	85,000	Rockwell B80	—	—	91072A182	00000	00000
								1/2"-28	3/4"-10	1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM A582	85,000	Rockwell B80	—	—	91072A185	00000	00000
								5/8"-11	3/4"-10	5/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2"	—	Not Rated	Rockwell B55	—	—	98434A610	00000	00000
								3/4"-10	3/4"-16	3/4"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	2"	ASTM A582	85,000	Rockwell B80	Digital	Material Certificate with Traceable Lot Number	98434A123	00000	00000
								3/4"-10	7/8"-9	3/4"	7/8"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM A582	85,000	Rockwell B80	Digital	Material Certificate with Traceable Lot Number	98434A124	00000	00000
								3/4"-10	1"-8	3/4"	1"	Unified Standard Class 2B	Unified Standard Class 2B	1 3/8"	2 1/2"	ASTM A582	85,000	Rockwell B80	Digital	Material Certificate with Traceable Lot Number	98434A125	00000	00000
								3/4"-10	1 1/4"-7	3/4"	1 1/16"	Unified Standard Class 2B	Unified Standard Class 2B	1 5/8"	3"	ASTM A582	85,000	Rockwell B80	—	—	91072A187	00000	00000


								316 Stainless Steel



										3/8"-16	3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A276	75,000	Rockwell B83	—	—	91072A243	00000	0000


										3/8"-24	3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A276	75,000	Rockwell B83	Digital	Material Certificate with Traceable Lot Number	91072A247	00000	00000
3/8"-32										3/4"-10	3/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	1 1/2"	ASTM A276	75,000	Rockwell B83	—	—	91072A251	00000	00000
1/2"-13	3/4"-10									1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM A276	75,000	Rockwell B83	—	—	91072A255	00000	00000
1/2"-20	3/4"-10									1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM A276	75,000	Rockwell B83	Digital	Material Certificate with Traceable Lot Number	91072A258	00000	00000
1/2"-28	3/4"-10									1/2"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2 1/4"	ASTM A276	75,000	Rockwell B83	—	—	91072A261	00000	00000
5/8"-11	3/4"-10									5/8"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1"	2"	ASTM A276	75,000	Rockwell B83	Digital	Material Certificate with Traceable Lot Number	91072A264	00000	00000
3/4"-10	3/4"-16									3/4"	3/4"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	2"	ASTM A276	75,000	Rockwell B83	—	—	91072A267	00000	00000
3/4"-10	7/8"-9									3/4"	7/8"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM A276	75,000	Rockwell B83	Digital	Material Certificate with Traceable Lot Number	91072A268	00000	00000
3/4"-10	1"-8									3/4"	1"	Unified Standard Class 2B	Unified Standard Class 2B	1 3/8"	2 1/2"	ASTM A276	75,000	Rockwell B83	Digital	Material Certificate with Traceable Lot Number	91072A269	00000	00000
3/4"-10	1 1/4"-7									3/4"	1 1/16"	Unified Standard Class 2B	Unified Standard Class 2B	1 5/8"	3"	ASTM A276	75,000	Rockwell B83	—	—	91072A270	00000	00000

Inch-to-Inch Male-Female Hex Thread Adapters

Change thread sizes or types, such as fine to coarse threads, on parts without changing gender. These adapters can also be used as standoffs to position components in assemblies and to create space between parts. They have an external hex, so you can tighten them with a wrench.

Black-Oxide Steel—Black oxide steel adapters have a finish that matches the aesthetics of your system and won’t chip or rub off. They resist rust better than plain steel in indoor and dry environments. However, they will corrode outdoors.

Aluminum—At about a third of the weight of steel adapters, aluminum adapters are the lightest we offer. They resist corrosion in wet environments.

18-8 Stainless Steel—18-8 stainless steel adapters resist corrosion in wet environments but will corrode when exposed to salt water and chemicals. They may be mildly magnetic.

316 Stainless Steel—316 stainless steel adapters are for use in wet environments and have the best corrosion resistance. Unlike 18-8 stainless steel adapters, they resist corrosion caused by salt water and chemicals. They may be mildly magnetic.

ASTM A108, ASTM A276, ASTM A582, and ASTM B211—Adapters that meet ASTM specifications are made from or plated with materials that adhere to specific standards for chemical and physical properties, such as hardness.

			Thread Lg.		Gender		Thread Fit		Hex
	Thread Size (A)	Thread Size (B)	(A)	(B)	(A)	(B)	(A)	(B)	Size	Length	Specs. Met	Tensile Strength, psi	Hardness		Each
Black-Oxide Steel



		3/8"-16	3/4"-10	3/4"	1"	Male	Female	Unified Standard Class 2A	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM A108	Not Rated	Rockwell B65	94402A109	000000


		Aluminum



				3/8"-16	3/4"-10	3/4"	1"	Male	Female	Unified Standard Class 2A	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM B211	45,000	Rockwell B56	91156A149	00000


				1/2"-13	3/4"-10	3/4"	1"	Male	Female	Unified Standard Class 2A	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM B211	45,000	Rockwell B56	91156A151	00000


				18-8 Stainless Steel



						3/8"-16	3/4"-10	3/4"	1"	Male	Female	Unified Standard Class 2A	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM A582	85,000	Rockwell B80	92499A264	00000


						1/2"-13	3/4"-10	3/4"	1"	Male	Female	Unified Standard Class 2A	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM A582	85,000	Rockwell B80	92499A266	00000


						316 Stainless Steel



								3/8"-16	3/4"-10	3/4"	1"	Male	Female	Unified Standard Class 2A	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM A276	75,000	Rockwell B83	91155A203	00000


								1/2"-13	3/4"-10	3/4"	1"	Male	Female	Unified Standard Class 2A	Unified Standard Class 2B	1 1/4"	2 1/4"	ASTM A276	75,000	Rockwell B83	91155A205	00000

Inch-to-Inch Male Hex Thread Adapters

Need to join two female-threaded parts, such as coupling nuts, with dissimilar inch thread sizes? Attach them to these adapters and tighten the exterior hex nut for a secure connection. You can also use these adapters to change the gender of a mating part from female to male, increase or decrease the thread size, or convert the threads from fine to coarse (and vice versa). The smaller adapters act as threaded standoffs, positioning and separating circuit boards and other components in assemblies.

Black-Oxide Steel—Choose black-oxide steel adapters to match the aesthetics of your system or for their mild corrosion resistance. The finish won't chip or rub off. They resist rust in indoor and dry environments, but avoid using them in corrosive environments.

Aluminum—At about a third of the weight of steel adapters, aluminum adapters are the lightest we offer. They resist corrosion in wet environments.

18-8 Stainless Steel—18-8 stainless steel adapters resist corrosion caused by water. They're good for wet and damp environments but will corrode when exposed to salt water and other chloride solutions.

316 Stainless Steel—316 stainless steel adapters have the best corrosion resistance. They stand up to wet environments, just like 18-8 stainless steel adapters, but unlike 18-8 stainless steel adapters, they resist corrosion caused by salt water and harsh chemicals.

			Thread Lg.		Thread Fit		Hex
	Thread Size (A)	Thread Size (B)	(A)	(B)	(A)	(B)	Size	Length	Specs. Met	Tensile Strength, psi	Hardness	Certificate Form	Certificate Type		Each
Black-Oxide Steel



		3/8"-16	3/4"-10	5/8"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM A108	78,000	Rockwell B85	—	—	91349A190	000000


		1/2"-13	3/4"-10	3/4"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM A108	78,000	Rockwell B85	Digital	Material Certificate with Traceable Lot Number	91349A230	00000


		Aluminum



				3/8"-16	3/4"-10	5/8"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM B211	45,000	Rockwell B56	Digital	Material Certificate with Traceable Lot Number	91347A520	00000


				1/2"-13	3/4"-10	3/4"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM B211	45,000	Rockwell B56	—	Material Certificate with Traceable Lot Number	91347A540	00000


				18-8 Stainless Steel



						3/8"-16	3/4"-10	5/8"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM A582	85,000	Rockwell B80	Digital	Material Certificate with Traceable Lot Number	95316A943	00000


						1/2"-13	3/4"-10	3/4"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM A582	85,000	Rockwell B80	Digital	Material Certificate with Traceable Lot Number	95316A992	00000


						316 Stainless Steel



								3/8"-16	3/4"-10	5/8"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM A276	75,000	Rockwell B83	Digital	Material Certificate with Traceable Lot Number	91344A780	00000


								1/2"-13	3/4"-10	3/4"	3/4"	Unified Standard Class 2A	Unified Standard Class 2A	1 1/8"	11/16"	ASTM A276	75,000	Rockwell B83	Digital	Material Certificate with Traceable Lot Number	91344A810	00000

Left-Hand to Right-Hand Male Thread Adapters

Made from black-oxide steel, these adapters resist corrosion in dry environments. Thread length is the same on both ends.

	Hardness		Each
Black-Oxide Steel







	3/4"-10 Threads

	4"	1 3/4"	70,000	Rockwell B67	94455A610	00000


	5"	1 3/4"	70,000	Rockwell B67	94455A614	0000
	6"	1 3/4"	70,000	Rockwell B67	94455A621	0000
	8"	2"	70,000	Rockwell B67	94455A629	0000

Left-Hand to Right-Hand Female Hex Thread Adapters

Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.

Zinc-Plated Steel—Zinc-plated steel adapters are strong and corrosion resistant.

18-8 Stainless Steel—18-8 stainless steel adapters have good corrosion resistance.

			Thread Lg.		Thread Fit		Hex				Each
	Thread Size (A)	Thread Size (B)	(A)	(B)	(A)	(B)	Size	Length	Hardness		1-9	10-Up
Black-Oxide Steel



		3/4"-10	3/4"-10	1 1/2"	1 1/2"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	5"	Rockwell B80	91998A117	000000	000000


		Zinc-Plated Steel



				3/4"-10	3/4"-10	2 1/4"	2 1/4"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	5"	Rockwell B65	94280A127	00000	00000


				18-8 Stainless Steel



						3/4"-10	3/4"-10	1 1/2"	1 1/2"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	5"	Rockwell B80	97372A118	00000	00000


						316 Stainless Steel



								3/4"-10	3/4"-10	1 1/2"	1 1/2"	Unified Standard Class 2B	Unified Standard Class 2B	1 1/4"	5"	Rockwell B80	95537A118	00000	00000

Reinforced Threaded-Hole Bumpers

Style 1

With a metal base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	9546K15	000000


		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 75A	Hard	Black	-40 to 200	Steel	No	Yes	9546K526	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

	Thread
	Size	Dp.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 40A	Medium Soft	Red	-40 to 200	Steel	No	Yes	9223K16	000000


		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 50A	Medium	Red	-40 to 200	Steel	No	Yes	9223K144	00000
		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 60A	Medium Hard	Black	-40 to 200	Steel	No	Yes	9546K446	00000
		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 85A	Hard	Red	-40 to 200	Steel	No	Yes	9546K57	00000
		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 95A	Extra Hard	Black	-40 to 200	Steel	No	Yes	9546K458	00000

Oil-Resistant Buna-N About Oil-Resistant Buna-N

Style 1

These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

	Thread
	Size	Dp.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		3/4"-10	1"	2 1/4"	2 1/4"	Durometer 40A	Medium Soft	White	-60 to 175	Steel	Yes	No	9546K467	000000

Clamping Acme Lead Screw Collars

Thread these one-piece collars onto an Acme lead screw to separate and position components, or use them as an end stop to limit travel. Tighten the clamping screw to secure.

To ensure compatibility, please select a collar that has the same thread type, direction, size, and number of thread starts as your lead screw.

Black-Oxide 1215 Carbon Steel—Black-oxide carbon steel collars have mild corrosion resistance.

303 Stainless Steel—303 stainless steel collars have good corrosion resistance.

	No. of Thread Starts	Hardness		Each
Right-Hand Thread







	Black-Oxide 1215 Carbon Steel

	3/4"-10	1 1/2"	1/2"	1	Brinell 167	6698K54	000000




			303 Stainless Steel

			3/4"-10	1 1/2"	1/2"	1	Brinell 228	2228N14	00000

Threaded Rod Collars

To install, thread these one-piece collars onto the end of your shaft. They clamp evenly around the shaft to create a strong, mar-free hold. Tighten the clamping screw to secure.

Black-Oxide 1215 Carbon Steel—Black-oxide steel collars have some corrosion resistance.

303 Stainless Steel—303 stainless steel collars have excellent corrosion resistance.

			Clamping Screw		Black-Oxide 1215 Carbon Steel		303 Stainless Steel
For Shaft Thread Size	OD	Wd.	Type	No. of		Each		Each
3/4"-10	1 1/2"	1/2"	Socket Head	1	6438K25	00000	6438K55	000000

Slot-Adapting Square Strut Channel Nuts

Convert strut channel slots into threaded holes. These nuts cover slotted openings to keep threaded rods, bolts, and other hardware centered.

Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.

		For Channel
	Thread Size	Ht.	Wd.	Ht.		Each
Zinc-Plated Steel



		3/4"-10	1 5/8", 2 7/16", 3 1/4"	1 5/8"	5/16"	2233K212	00000

Two-Piece Clamping Acme Lead Screw Collars

Mount these two-piece collars anywhere on an Acme lead screw without removing components. Use them to separate and position components or as an end stop to limit travel. Tighten the clamping screw to secure.

To ensure compatibility, please select a collar that has the same thread type, direction, size, and number of thread starts as your lead screw.

Black-Oxide 1215 Carbon Steel—Black-oxide carbon steel collars have mild corrosion resistance.

	No. of Thread Starts	Hardness		Each
Right-Hand Thread







	Black-Oxide 1215 Carbon Steel

	3/4"-10	1 1/2"	1/2"	1	Brinell 167	2207N14	000000

Spring-Loaded Strut Channel Nuts

A built-in spring gives these nuts a push for easy installation. Slide nuts into strut channel and they’ll stay place until you’re ready to fasten with a rod or screw. Like rectangular nuts, these have serrated grooves that grip the lip of the channel.

Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.

		For Channel
	Thread Size	Ht.	Wd.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		3/4"-10	1 5/8"	1 5/8"	1	3259T407	00000

Rectangular Strut Channel Nuts

The most common strut channel nuts, these have serrated grooves that grip the lip inside channel.

Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.

316 Stainless Steel—Superior to 304 stainless steel, these won't degrade when exposed to harsh weather, salt water, and most chemicals.

		For Channel
	Thread Size	Ht.	Wd.	Ht.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		3/4"-10	13/16", 1 5/8", 2 7/16", 3 1/4"	1 5/8"	7/16"	5	3259T844	000000


		316 Stainless Steel



				3/4"-10	1 5/8", 2 7/16", 3 1/4"	1 5/8"	7/16"	1	3259T849	00000

Threaded Two-Piece Rod Collars

Install these collars anywhere on a shaft without removing components or having access to the ends of the shaft. Collars clamp evenly around the shaft to create a strong, mar-free hold. Tighten the clamping screws to secure.

Black-Oxide 1215 Carbon Steel—Black-oxide steel collars have some corrosion resistance.

303 Stainless Steel—303 stainless steel collars have excellent corrosion resistance.

			Clamping Screw		Black-Oxide 1215 Carbon Steel		303 Stainless Steel
For Shaft Thread Size	OD	Wd.	Type	No. of		Each		Each
3/4"-10	1 1/2"	1/2"	Socket Head	2	60705K37	000000	60705K57	000000