Hinged for adjustability, these wrenches fit a range of diameters.

Reverse the pins when you need to fit different hole sizes on the face of collars, bearings, and other machine tool components.

Change out the pins to fit a different hole size.

Fit these wrenches into slots on the circumference of collars, bearings, and other machine tool components.

In addition to a long handle, these wrenches include two heads with different hook widths.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These wrenches are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.

The head pivots to accommodate a range of diameters.

Made of materials that are Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

An extra-long handle provides access to hard-to-reach fasteners and increases leverage.

A lever reverses the ratchet direction.

Flip these wrenches over to ratchet in the opposite direction.

These wrenches are made of stainless steel for excellent corrosion resistance.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Suitable for occasional maintenance work, these sets are imported.

Flip these wrenches over to ratchet in the opposite direction.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the box end for access to fasteners in tight spots.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

These wrenches are made of stainless steel for excellent corrosion resistance.

The slim head fits into tight spaces and around thin fasteners.

One head is angled for access to hard-to-reach fasteners. These are also known as ignition wrenches.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

Also known as alligator wrenches and water-meter nut wrenches, the V-shaped head fits multiple hex fastener sizes.

The head is offset 45° to provide additional clearance when reaching over obstructions.

These lightweight tools are also known as AN (Army-Navy) wrenches.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

The slim heads fit into tight spaces and around thin fasteners.

One head is angled 75° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

Measure with an accuracy of ±7%.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

The shaft on these wrenches extends and locks.

When the ratchet head becomes worn or damaged, change it out for a new one.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Turn sockets in the most confined spaces.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

No need to pull the socket off the tool—push a button to release.

Extend the shaft for additional length.

A rubber coating provides a comfortable grip.

Use these tools for general shop applications.

Turn sockets with a bit screwdriver.

Fit these adapters between your wrench and socket to enable finger tightening.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Set a desired torque within the range.

Pivot the head to access fasteners from an angle.

A magnet holds the socket, making changes quicker.

Pivot the head to access fasteners from an angle.

Slide the lever to adjust the jaws to fit multiple sizes of square and hex fasteners.

Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.

Press the lever to lock the jaw and keep these wrenches clamped on your work, leaving your hands free.

An insulated handle protects against accidental contact with live electrical circuits. These wrenches are tested to 1,000 volts to meet IEC 60900.

A plastic-covered handle provides a comfortable grip.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

The jaws on these wrenches are shaped to turn slip nuts, jam nuts, and large hex nuts.

Also known as a basin wrench, this tool has a pivoting head and spring-close jaws for working in tight spaces where it’s difficult to adjust a traditional wrench.

Squeeze the handles and the gripping surfaces adjust to fit your fastener and prevent slipping and stripping.

Turn fasteners with the firm grip of a wrench and the adjustability of pliers.

A spanner-style head fits the lugs on fire hose couplings and adapters.