Type Type |
---|
![]() | ![]() |
Repair Clamp | Connector |
![]() | |
Saddle Tap |
For Use With For Use With |
---|
|
For Pipe OD For Pipe OD |
---|
Material Material |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
Gasket Material Gasket Material |
---|
|
Specifications Met Specifications Met |
---|
|
Maximum Vacuum Maximum Vacuum |
---|
|
Nut Material Nut Material |
---|
|
Bolt Material Bolt Material |
---|
|
Lug Material Lug Material |
---|
|
Connection Style Connection Style |
---|
![]() |
Clamp On |
![]() |
Threaded |
![]() |
Socket Connect |
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Use these clamps to repair pinholes and cracks in medium-pressure applications. They slip over your pipe, so there's no need to disassemble your system.
304 stainless steel clamps have very good corrosion resistance; they are adjustable to accommodate slight variance of pipe OD due to aging or corrosion build up. They can also be used to repair full-circle breaks. They meet NSF/ANSI 61 safety standards for use with drinking water systems.
For Pipe OD | For Pipe Size | No. of Bolts | Max. Pressure | Max. Vacuum | Lug Material | Nut Material | Bolt Material | Gasket Material | Each | |
7 1/2" Lg. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
2.35" to 2.63" | 2 | 3 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
2.7" to 3" | 2 1/2 | 3 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
3.46" to 3.7" | 3 | 3 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
3.73" to 4" | 3 1/2 | 3 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
4.45" to 4.73" | 4 | 3 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
5.22" to 5.62" | 5 | 3 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
6.56" to 6.96" | 6 | 3 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
8.54" to 8.94" | 8 | 3 | 200 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
10.64" to 11.04" | 10 | 3 | 170 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
12 1/2" Lg. | ||||||||||
2.35" to 2.63" | 2 | 5 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
2.7" to 3" | 2 1/2 | 5 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
3.46" to 3.7" | 3 | 5 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
3.73" to 4" | 3 1/2 | 5 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
4.45" to 4.73" | 4 | 5 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
5.22" to 5.62" | 5 | 5 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
6.56" to 6.96" | 6 | 5 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
8.54" to 8.94" | 8 | 5 | 200 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
10.64" to 11.04" | 10 | 5 | 170 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
15" Lg. | ||||||||||
2.35" to 2.63" | 2 | 6 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
2.7" to 3" | 2 1/2 | 6 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
3.46" to 3.7" | 3 | 6 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
3.73" to 4" | 3 1/2 | 6 | 250 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
4.45" to 4.73" | 4 | 6 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
5.22" to 5.62" | 5 | 6 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
6.56" to 6.96" | 6 | 6 | 220 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
8.54" to 8.94" | 8 | 6 | 200 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
10.64" to 11.04" | 10 | 6 | 170 psi @ 72° F | 15 in. of Hg @ 72° F | Iron | Steel | Steel | Buna-N Rubber | 00000000 | 000000 |
Since they meet NSF/ANSI 61 safety standards, use these clamps to repair pinholes, cracks, and full-circle breaks in low-pressure drinking water applications. Clamps are 304 stainless steel for very good corrosion resistance. They can be used underwater and anywhere corrosion is a concern. They slip over your pipe, so there's no need to disassemble your system.
7 ½", 12 ½", and 15" long clamps are adjustable to accommodate slight variance of pipe OD due to aging or corrosion build up.
For Pipe OD | For Pipe Size | No. of Bolts | Max. Pressure | Max. Vacuum | Material | Lug Material | Nut Material | Gasket Material | Each | |
3" Lg. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.84" | 1/2 | 1 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 000000 |
1.05" | 3/4 | 1 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 00000 |
1.315" | 1 | 1 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 00000 |
1.66" | 1 1/4 | 1 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 00000 |
1.9" | 1 1/2 | 1 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 00000 |
2 3/8" | 2 | 1 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 00000 |
6" Lg. | ||||||||||
0.84" | 1/2 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 000000 |
1.05" | 3/4 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 000000 |
1.315" | 1 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 000000 |
1.66" | 1 1/4 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 000000 |
1.9" | 1 1/2 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 000000 |
2 3/8" | 2 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | Iron | Galvanized Steel | Buna-N Rubber | 00000000 | 000000 |
7 1/2" Lg. | ||||||||||
2.7" to 3" | 2 1/2 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
3.46" to 3.7" | 3 | 2 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
4.45" to 4.73" | 4 | 2 | 120 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
6.56" to 6.96" | 6 | 2 | 120 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
12 1/2" Lg. | ||||||||||
2.7" to 3" | 2 1/2 | 3 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
3.46" to 3.7" | 3 | 3 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
4.45" to 4.73" | 4 | 3 | 120 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
6.56" to 6.96" | 6 | 3 | 120 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
15" Lg. | ||||||||||
2.7" to 3" | 2 1/2 | 4 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
3.46" to 3.7" | 3 | 4 | 150 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
4.45" to 4.73" | 4 | 4 | 120 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
6.56" to 6.96" | 6 | 4 | 120 psi @ 72° F | 15 in. of Hg @ 72° F | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | Buna-N Rubber | 0000000 | 000000 |
These heavy duty steel connectors are designed for high-pressure applications. Use them to connect rigid pipe of the same or different materials. They meet NSF/ANSI 61 safety standards for use with drinking water systems. To install, center the connector over two pipe ends and tighten the bolts with a wrench. They allow limited expansion and contraction; they do not restrain side-to-side movement.
For Pipe OD | For Pipe Size | Lg. | No. of Bolts | Max. Pressure | Max. Vacuum | Material | Gasket Material | Each | |
0.84" | 1/2 | 7" | 2 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 000000 |
1.05" | 3/4 | 7" | 2 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 00000 |
1.315" | 1 | 7" | 2 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 00000 |
1.66" | 1 1/4 | 7" | 2 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 00000 |
1.9" | 1 1/2 | 7" | 2 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 00000 |
2.38" | 2 | 8" | 2 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 00000 |
3 1/2" | 3 | 6" | 3 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 000000 |
4 1/2" | 4 | 6" | 4 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 000000 |
5.563" | 5 | 8" | 4 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 000000 |
6 5/8" | 6 | 6" | 6 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 000000 |
8 5/8" | 8 | 6" | 6 | 500 psi @ 72° F | 15 in. of Hg @ 72° F | Steel | Buna-N Rubber | 0000000 | 000000 |
Connect these fittings to Schedule 80 pipe–they have thicker, stronger walls than standard-wall fittings so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM D1784 specifications and testing requirements for material quality.
Fittings for drinking water meet NSF/ANSI Standard 61.
To prevent leaks in threaded connections, apply a sealant to the male threads. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
Pipe Size | For Pipe Size | For Pipe OD | For Hole Dia. | Material | Collar Material | Color | Max. Pressure | Each | |
NPT Threads | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/2 | 2 | 2 3/8" | 3/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
1/2 | 3 | 3 1/2" | 7/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1/2 | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
3/4 | 2 | 2 3/8" | 7/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
3/4 | 3 | 3 1/2" | 7/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
3/4 | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 | 2 | 2 3/8" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 | 3 | 3 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 | 4 | 4 1/2" | 1 1/8" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 3 | 3 1/2" | 2 1/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 4 | 4 1/2" | 1 3/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
2 | 4 | 4 1/2" | 2 1/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 00000 |
2 | 6 | 6 5/8" | 2 1/4" | PVC Plastic | Stainless Steel | Dark Gray | 200 psi @ 72° F | 0000000 | 000000 |
Type | Each | |
Thread Sealant | 000000 | 000000 |
Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
Fittings for drinking water meet NSF/ANSI Standard 61.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
To prevent leaks in threaded connections, apply a sealant to the male threads. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. Fittings that meet ASTM D1784, ASTM D1785, and ASTM D4066 adhere to specifications and testing requirements for material quality.
Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
Pipe Size | Socket Depth | For Pipe Size | For Pipe OD | For Hole Dia. | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Each | |
1 1/2 | 1/2" | 4 | 4 1/2" | 1 3/4" | 1 29/32" | 1.61" | 0.145" | PVC Plastic | White | 200 psi @ 72° F | 0000000 | 000000 |
1 1/2 | 29/32" | 3 | 3 1/2" | 2 1/4" | 1 29/32" | 1.61" | 0.145" | PVC Plastic | White | 200 psi @ 72° F | 0000000 | 00000 |
2 | 3/8" | 3 | 3 1/2" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | White | 200 psi @ 72° F | 0000000 | 00000 |
2 | 7/16" | 4 | 4 1/2" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | White | 200 psi @ 72° F | 0000000 | 00000 |
2 | 11/16" | 6 | 6 5/8" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | White | 200 psi @ 72° F | 0000000 | 000000 |
3 | 1/2" | 4 | 4 1/2" | 3" | 3 1/2" | 3.068" | 0.216" | PVC Plastic | White | 200 psi @ 72° F | 0000000 | 00000 |
Pipe Cement | 00000000 | Each | 00000 |
Fittings with stainless steel collar have a reinforcement on the female threads to prevent the threads from cracking.
Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.
Pipe Size | Socket Depth | For Pipe Size | For Pipe OD | For Hole Dia. | OD | ID | Wall Thick. | Material | Collar Material | Color | Max. Pressure | Each | |
NPT Threads | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/2 | 5/16" | 2 | 2 3/8" | 3/4" | 27/32" | 0.622" | 0.109" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 000000 |
3/4 | 5/16" | 2 | 2 3/8" | 7/8" | 1 3/64" | 0.824" | 0.113" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 00000 |
3/4 | 27/32" | 4 | 4 1/2" | 1 1/8" | 1 3/64" | 0.824" | 0.113" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 00000 |
1 | 5/16" | 2 | 2 3/8" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 00000 |
1 | 7/16" | 4 | 4 1/2" | 1 1/8" | 1 5/16" | 1.049" | 0.133" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 00000 |
2 | 11/16" | 6 | 6 5/8" | 2 1/4" | 2 3/8" | 2.067" | 0.154" | PVC Plastic | Stainless Steel | White | 200 psi @ 72° F | 0000000 | 000000 |
Non-Hardening Thread Sealants | 000000 | Each | 000000 |