Individual/Set Individual/Set |
|---|
|
Drill Bit Flute Direction Drill Bit Flute Direction |
|---|
|
For Screw Size For Screw Size |
|---|
For Removing For Removing |
|---|
|
For Thread Direction For Thread Direction |
|---|
|
Container Type Container Type |
|---|
|
Drill Bit Material Drill Bit Material |
|---|
|
Use with Drill Bit Size Use with Drill Bit Size |
|---|
For Maximum Screw Thread Diameter For Maximum ScrewThread Diameter |
|---|
Turns With Turns With |
|---|
|
For Minimum Screw Thread Diameter For Minimum ScrewThread Diameter |
|---|
Overall Length Overall Length |
|---|
|
|
|
Square Shank Size Square Shank Size |
|---|
|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Extractor and Drill Bit Sets
No more searching for the right drill bit sizes—these sets match them with the corresponding extractors. Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
Left-hand drill bits can also be used to extract.
For Screw | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Extractor Trade Size | Thread Dia. | Size | For Pipe Size | Overall Lg. | Square Shank Size | Turns With | Material | No. of Drill Bits Included | Drill Bit Size | Container Type | Each | |
For Right-Hand Threads | |||||||||||||
Right-Hand High-Speed Steel Drill Bits | |||||||||||||
| 6 | 1, 2, 3, 4, 5, 6 | 0.1"-1" | No. 8-1" (M2.5-M24) | 1/8-3/8 | 2"-3 3/4" | 0.157"-0.594" | Wrench, Tap Wrench | Steel | 6 | 5/64", 7/64", 5/32", 1/4", 13/32", 17/64" | Vinyl Pouch | 0000000 | 000000 |
Right-Hand Cobalt Steel Drill Bits | |||||||||||||
| 5 | 1, 2, 3, 4, 5 | 0.1"-0.78" | No. 8-3/4" (M2.5-M20) | 1/8 | 2"-3 3/8" | 0.125"-0.438" | Wrench, Tap Wrench | Steel | 5 | 5/64", 7/64", 5/32", 1/4", 19/64" | __ | 0000000 | 00000 |
Left-Hand Cobalt Steel Drill Bits | |||||||||||||
| 5 | 1, 2, 3, 4, 5 | 0.1"-0.78" | No. 8-3/4" (M2.5-M20) | 1/8 | 2"-3 3/8" | 0.125"-0.438" | Wrench, Tap Wrench | Steel | 5 | 5/64", 7/64", 5/32", 1/4", 19/64" | Metal Case | 0000000 | 00000 |
Extractors
Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
For Screw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Extractor Trade Size | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Square Shank Size | Turns With | Material | Each | |
For Right-Hand Threads | ||||||||||
| 1 | 0.1"-0.25" | No. 8-1/4" (M2.5-M6) | __ | 5/64" | 2" | 0.115" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 2 | 0.22"-0.31" | No. 12-5/16" (M6-M8) | __ | 7/64" | 2 3/8" | 0.14" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 3 | 0.32"-0.47" | 5/16"-7/16" (M8-M12) | __ | 5/32" | 2 3/4" | 0.195" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 4 | 0.44"-0.56" | 7/16"-9/16" (M12-M14) | 1/8 | 1/4" | 3" | 0.245" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 5 | 0.56"-0.78" | 9/16"-3/4" (M14-M20) | 1/8, 1/4 | 9/32" | 3 3/8" | 0.343" | Wrench, Tap Wrench | Steel | 0000000 | 0000 |
| 5 1/4 | 0.67"-0.94" | 11/16"-15/16" (M18-M24) | 1/4 | 23/64" | 3 3/8" | 0.398" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 6 | 0.75"-1" | 3/4"-1" (M20-M24) | 3/8 | 13/32" | 3 3/4" | 0.452" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 6 3/8 | 0.94"-1.14" | 1"-1 1/8" (M24-M27) | 3/8 | 31/64" | 3 3/4" | 0.512" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 7 | 0.99"-1.37" | 1"-1 3/8" (M26-M33) | 1/2 | 17/32" | 4 1/8" | 0.56" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 7 1/2 | 1.13"-1.5" | 1 1/8"-1 1/2" (M30-M36) | 1/2 | 39/64" | 4 1/8" | 0.656" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 8 | 1.38"-1.75" | 1 3/8"-1 3/4" (M36-M42) | 3/4 | 13/16" | 4 3/8" | 0.75" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 9 | 1.75"-2.12" | 1 3/4"-2" (M48) | 1 | 1 1/16" | 4 5/8" | 0.89" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 10 | 2.13"-2.5" | 2 1/4"-2 1/2" (M56) | 1 1/4 | 1 5/16" | 5" | 0.972" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 11 | 2.49"-3" | 2 1/2"-3" | 1 1/2 | 1 9/16" | 5 5/8" | 1.125" | Wrench, Tap Wrench | Steel | 0000000 | 00000 |
| 12 | 3"-3.5" | 3"-3 1/2" | 2 | 1 15/16" | 6 1/4" | 1.319" | Wrench, Tap Wrench | Steel | 0000000 | 000000 |
Extractor Sets
Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For Screw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Extractor Trade Size | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Square Shank Size | Turns With | Material | Container Type | Each | |
For Right-Hand Threads | ||||||||||||
| 4 | 5, 5 1/4, 6 3/8, 7 1/2 | 0.56"-1.5" | 9/16"-1 1/2" (M14-M36) | 1/8-1/2 | 17/64", 23/64", 31/64", 39/64" | 3 3/8"-4 1/8" | 0.343"-0.656" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 000000 |
| 4 | 6, 7, 8, 9 | 0.75"-2.12" | 3/4"-2" (M20-M48) | 3/8-1 | 13/32", 17/32", 13/16", 1 1/16" | 3 3/4"-4 5/8" | 0.452"-0.890" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 000000 |
| 5 | 1, 2, 3, 4, 5 | 0.1"-0.78" | No. 8-3/4" (M2.5-M20) | 1/8 | 5/64", 7/64", 5/32", 1/4", 17/64" | 2"-3 3/8" | 0.115"-0.343" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 00000 |
| 6 | 1, 2, 3, 4, 5, 6 | 0.1"-1" | No. 8-1" (M2.5-M24) | 1/8-3/8 | 5/64", 7/64", 5/32", 1/4", 17/64", 13/32" | 2"-3 3/4" | 0.115"-0.452" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 00000 |
| 6 | 5, 5 1/4, 6 3/8, 7 1/2, 8, 9 | 0.56"-2.12" | 9/16"-2" (M14-M48) | 1/8-1 | 17/64", 13/16", 1 1/16", 23/64", 31/64", 39/64" | 3 3/8"-4 5/8" | 0.343"-0.890" | Wrench, Tap Wrench | Steel | Vinyl Pouch | 0000000 | 000000 |
| 9 | 1, 2, 3, 4, 5, 6, 7, 8, 9 | 0.1"-2.12" | No. 8-2" (M2.5-M48) | 1/8-1 | 5/64", 7/64", 5/32", 1/4", 13/32", 17/32", 13/16", 1 1/16", 19/64" | 2"-4 1/2" | 0.115"-0.890" | Wrench, Tap Wrench | Steel | Plastic Case | 0000000 | 000000 |
Case for Spiral-Flute Extractors and Drill Bits
Store your extractors and corresponding drill bits.
For Extractors | For Drill Bits | ||||||
|---|---|---|---|---|---|---|---|
| Number of | Trade Number | Flute Style | Number of | Size | Material | Each | |
| 5 | 1, 2, 3, 4, 5 | Spiral | 5 | 5/64", 7/64", 5/32", 1/4", 19/64" | Steel | 00000000 | 00000 |
Extra-Grip Extractors
Deep flutes provide a strong grip and reduced expansion of the part you need to extract. Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
For Screw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Extractor Trade Size | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Each | |
For Right-Hand Threads | |||||||||
| 1 | 0.38"-0.39" | 3/8" (M10) | 1/8 | 13/64" | 1 1/2" | Wrench | Steel | 0000000 | 00000 |
| 2 | 0.48"-0.5" | 1/2" (M12) | 1/4 | 9/32" | 1 1/2" | Wrench | Steel | 0000000 | 00000 |
| 3 | 0.63"-0.78" | 5/8"-3/4" (M16-M20) | 3/8 | 13/32" | 1 3/4" | Wrench | Steel | 0000000 | 00000 |
| 4 | __ | __ | 1/2 | __ | 2" | Wrench | Steel | 0000000 | 00000 |
| 5 | 1.11"-1.25" | 1 1/8"-1 1/4" (M30) | 3/4 | 23/32" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
| 6 | 1.5"-1.77" | 1 1/2"-1 3/4" (M40-M42) | 1 | 29/32" | 2 3/4" | Wrench | Steel | 0000000 | 00000 |
| 7 | 1.97"-2" | 2" | 1 1/4 | 1 3/16" | 3 3/8" | Wrench | Steel | 0000000 | 00000 |
| 8 | 2.21"-2.5" | 2 1/4"-2 1/2" (M56) | 1 1/2 | 1 15/32" | 3 1/2" | Wrench | Steel | 0000000 | 00000 |
| 9 | 2.96"-3.5" | 3"-3 1/2" | 2 | 2 1/16" | 4 3/8" | Wrench | Steel | 0000000 | 000000 |
| 10 | 0.87"-1" | 7/8"-1" (M22-M24) | __ | 1/2" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
For Left-Hand Threads | |||||||||
| 1 | 0.38"-0.39" | 3/8" (M10) | 1/8 | 13/64" | 1 1/2" | Wrench | Steel | 0000000 | 0000 |
| 2 | 0.48"-0.5" | 1/2" (M12) | 1/4 | 9/32" | 1 1/2" | Wrench | Steel | 0000000 | 00000 |
| 3 | 0.63"-0.78" | 5/8"-3/4" (M16-M20) | 3/8 | 13/32" | 1 3/4" | Wrench | Steel | 0000000 | 00000 |
| 4 | __ | __ | 1/2 | __ | 2" | Wrench | Steel | 0000000 | 00000 |
| 5 | 1.11"-1.25" | 1 1/8"-1 1/4" (M30) | 3/4 | 23/32" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
| 6 | 1.5"-1.77" | 1 1/2"-1 3/4" (M42) | 1 | 29/32" | 2 3/4" | Wrench | Steel | 0000000 | 00000 |
| 7 | 1.97"-2" | 2" | 1 1/4 | 1 3/16" | 3 3/8" | Wrench | Steel | 0000000 | 00000 |
| 8 | 2.21"-2.5" | 2 1/4"-2 1/2" (M56) | 1 1/2 | 1 15/32" | 3 1/2" | Wrench | Steel | 0000000 | 00000 |
| 9 | 2.96"-3.5" | 3"-3 1/2" | 2 | 2 1/16" | 4 3/8" | Wrench | Steel | 0000000 | 000000 |
| 10 | 0.87"-1" | 7/8"-1" (M22-M24) | __ | 1/2" | 2 1/2" | Wrench | Steel | 0000000 | 00000 |
Extra-Grip Extractor Sets
Deep flutes provide a strong grip and reduced expansion of the part you need to extract. Drill a hole in the broken part, insert the extractor, and turn. The part will back out without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
For Screw | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Extractor Trade Size | Thread Dia. | Size | For Pipe Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Container Type | Each | |
For Right-Hand Threads | |||||||||||
| 5 | 1, 2, 3, 4, 5 | 0.38"-1.25" | 3/8"-1 1/4" (M10-M30) | 1/8-3/4 | 13/64", 9/32", 13/32", 23/32" | 1 1/2"-2 1/2" | Wrench | Steel | Plastic Case | 0000000 | 0000000 |
| 6 | 1, 2, 3, 4, 5, 6 | 0.38"-1.77" | 3/8"-1 3/4" (M10-M42) | 1/8-1 | 13/64", 9/32", 13/32", 23/32", 29/32" | 1 1/2"-2 3/4" | Wrench | Steel | Plastic Case | 0000000 | 000000 |
| 7 | 1, 2, 3, 4, 5, 6, 10 | 0.38"-1.77" | 3/8"-1 3/4" (M10-M42) | 1/8-1 | 13/64", 9/32", 13/32", 23/32", 29/32", 1/2" | 1 1/2"-2 3/4" | Wrench | Steel | Plastic Case | 0000000 | 000000 |
| 10 | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 | 0.38"-3.5" | 3/8"-3 1/2" (M10-M56) | 1/8-2 | 13/64", 9/32", 13/32", 23/32", 29/32", 1/2", 1 3/16", 1 15/32", 2 1/16" | 1 1/2"-4 3/8" | Wrench | Steel | Plastic Case | 0000000 | 000000 |
Tight-Clearance Extractors
The short and stocky design provides a strong grip without needing to drill a deep hole in the broken part. After drilling, insert the extractor and turn. The part will back out without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
For Screw | |||||||
|---|---|---|---|---|---|---|---|
| Thread Dia. | Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Each | |
For Right-Hand Threads | |||||||
| 0.22"-0.23" | No. 12 (M6) | 1/8" | 1 1/4" | Wrench | Steel | 000000000 | 00000 |
| 0.24"-0.25" | 1/4" (M6) | 5/32" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.31"-0.32" | 5/16" (M8) | 3/16" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.38"-0.39" | 3/8" (M10) | 7/32" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.43"-0.44" | 7/16" | 1/4" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.48"-0.5" | 1/2" (M12) | 9/32" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.56"-0.78" | 9/16" (M14) | 5/16" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.62"-0.63" | 5/8" (M16) | 11/32" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.67"-0.68" | 11/16" | 3/8" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.75"-0.78" | 3/4" (M20) | 13/32" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.99"-1" | 1" | 17/32" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 1.18"-1.19" | M30 | 5/8" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
| 0.87" | 7/8" (M22) | 7/8" | 1 1/4" | Wrench | Steel | 000000000 | 0000 |
Tight-Clearance Extractor Sets
The short and stocky design provides a strong grip without needing to drill a deep hole in the broken part. After drilling, insert the extractor and turn. The part will back out without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
For Screw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. of Extractors Included | Thread Dia. | Size | Use with Drill Bit Size | Overall Lg. | Turns With | Material | Container Type | Each | |
For Right-Hand Threads | |||||||||
| 10 | 0.22"-0.78" | No. 12-3/4" (M6-M20) | 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32" | 1 1/4" | Wrench | Steel | Plastic Case | 00000000 | 000000 |
| 25 | 0.22"-1.68" | No. 12-1 5/8" (M6-M42) | 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 3/4", 25/32", 13/16", 27/32", 7/8", 23/32" | 1 1/4" | Wrench | Steel | Plastic Case | 00000000 | 00000 |
Combination Extractor/Drill Bit Sets
Drill and remove broken screws, bolts, and studs with a single tool. After drilling, insert the extractor and turn. The part will back out without damaging the threads around it.
Combination Extractor/Drill Bits
Drill and remove broken screws, bolts, and studs with a single tool. After drilling, insert the extractor and turn. The part will back out without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
For Screw | |||||||
|---|---|---|---|---|---|---|---|
| Thread Dia. | Size | Overall Lg. | Shank Dia. | Turns With | Material | Each | |
For Right-Hand Threads | |||||||
| 0.12"-0.13" | No. 5-No. 6 (M3-M3.5) | 1 1/8" | 0.103" | Power Drill | Steel | 00000000 | 000000 |
| 0.18"-0.19" | 3/16" (M5) | 2" | 0.103" | Power Drill | Steel | 00000000 | 00000 |
| 0.24"-0.25" | 1/4" (M6) | 1 3/8" | 0.172" | Power Drill | Steel | 00000000 | 00000 |
| 0.31"-0.32" | 5/16" (M8) | 1 1/4" | 0.177" | Power Drill | Steel | 00000000 | 00000 |
| 0.38"-0.39" | 3/8" (M10) | 1 1/2" | 0.216" | Power Drill | Steel | 00000000 | 00000 |
| 0.48"-0.5" | 1/2" (M12) | 1 5/8" | 0.275" | Power Drill | Steel | 00000000 | 00000 |
| 0.16" | No. 8 (M4) | 1 1/4" | 0.136" | Power Drill | Steel | 00000000 | 00000 |
| 0.19" | No. 10 (M5) | 1 5/8" | 0.136" | Power Drill | Steel | 00000000 | 00000 |
External-Grip Extractors for Power Tools
Use a power tool to quickly extract a fastener without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
| No. of Extractors Included | For OD | Overall Lg. | Hex Shank Size | Turns With | Material | Each | |
For Right-Hand and Left-Hand Threads | |||||||
|---|---|---|---|---|---|---|---|
| 7 | 3/16"-1/2" (8-11mm) | 2 5/8" | 1/4" | Power Drill, Powered Screwdriver | Steel | 0000000 | 000000 |
External-Grip Extractor Sockets
Fit these square-drive sockets over a damaged fastener, tap in place with a hammer, and turn to extract the fastener without damaging the threads around it.
For technical drawings and 3-D models, click on a part number.
| No. of Extractors Included | For OD | Overall Lg. | Square Drive Size | Turns With | Material | Each | |
For Right-Hand Threads | |||||||
|---|---|---|---|---|---|---|---|
| 5 | 3/4"-1" (19-24mm) | 1 3/4" | 1/2" | Square-Drive Tool, Impact Wrench | Steel | 0000000 | 0000000 |
For Right-Hand and Left-Hand Threads | |||||||
| 9 | 5/16"-3/4" (8-19mm) | 1" | 3/8" | Square-Drive Tool, Impact Wrench | Steel | 0000000 | 000000 |
| 13 | 1/4"-3/4" (8-19mm) | 1" | 3/8" | Square-Drive Tool, Impact Wrench | Steel | 0000000 | 000000 |