These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

Quickly change spray angles by removing the nozzle and snapping on a new one.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

These nozzles project their spray at a right angle from their threaded connection.

These nozzles project their spray at a right angle from their threaded connection.

These nozzles provide a uniform distribution of droplets.

A check valve prevents the nozzle from dripping when it is turned off.

Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.

These nozzles provide a uniform distribution of droplets.

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain.

Certified by 3-A to meet sanitary design standards, these stationary nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.

These nozzles produce a flat, thin spray pattern.

No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

For light duty spray-down applications, attach these wash guns to any standard garden hose.

These wash guns have a high maximum pressure, so use them with pressure washers and high-pressure spray systems.

Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.

Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.

Clean and sanitize surfaces with the power of steam—with or without detergents and other chemicals.

These premium nozzles are engineered for the most efficient airflow consumption.

Attach to your blowgun to direct airflow.

Extend these telescoping nozzles to increase your reach.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Adjust airflow to control consumption and noise.

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

Choose a base, hose, and nozzle for a custom setup.

Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.

Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.

These blowguns have a metal body.

The rubber tip won't damage parts.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

Connect the included hose to your air supply and these blowguns are ready to use.

The included hose is ready to connect to your air supply.

These guns include a rubber tip that won't damage your workpiece.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

Maximize comfort and minimize strain with these lightweight guns.

The extra length lets you access hard-to-reach areas.

The flat nozzle distributes air over a wide area.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Secure an air knife to the bracket and position where needed. Two swiveling joints allow 360° movement.

Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.

Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.

Attach to a blower for high-speed airflow at low pressure.

Sets include a focused nozzle for concentrated airflow, a flat-tip nozzle for heating wide surfaces, and a deflecting nozzle that protects adjacent surfaces from heating.

Insert plastic welding rod through a second opening in the nozzle. It directs air to heat the rod and weld plastic.

A deflector protects adjacent areas from heating. The flat shape creates a wide airflow.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Use with Loc-Line hose to assemble and disassemble components.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.

Draw coolant from your existing tank.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

These dispensers have a reservoir for recirculating coolant.

Twist the barrel to adjust water flow.

Use the lever to turn water flow on and off.

Adjust the flow while dispensing liquid chemicals.

Control the flow while dispensing diesel fuel with these nozzles.

Attach these nozzles to your high-pressure water line to flush grit and grime out of blocked pipes.

Set the thermostat and these vortex tubes switch on only when needed.

Keep electronics inside enclosures from overheating by converting compressed air into a stream of cold air.

Quietly cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.

Cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.

In addition to being quieter than standard enclosure-cooling vortex tubes, these stand up to washdowns and weather. They convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.