Turn any surface into a dry-erase board. Spray this paint onto metal, glass, and plastic to create a durable finish that works with most dry-erase markers and cleaners. It can also be used on drywall and other smooth surfaces that are already painted.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading. Scrape rusty areas clean before application. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life and corrosion resistance of paint.

Silicone paint stops corrosion on high-temperature surfaces, such as smokestacks, incinerators, heaters, and heat exchangers. Paint in an aerosol can does not require a primer. Spray paint on, and then increase the temperature two to three times (450° to 650° F), allowing surface to cool between firings.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Mark traffic lanes, parking lots, and factory floors.

Alkyd paint dries quickly and can also be used on turf.

Acrylic paint withstands abrasion in high-traffic areas.

Apply paint in a one-gallon can and a five-gallon pail with a brush, roller, or sprayer.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

Apply sealer (sold separately) over chalk for up to 30 days of added protection.

This paint adheres to most types of plastic without sanding or priming.

This water-based paint will not harm grass or other plant life.

Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.

This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.

Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance. This fast-drying paint creates a film on its surface as it dries to keep out additional water. Its solvent base mixes with the water in wet wood and allows the paint to penetrate the surface. Once dry, it won’t wash off.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight. They cannot be sold to the regions listed because they exceed local regulatory limits on VOC (volatile organic compounds).

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Rubber coatings withstand salt and acids. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. Apply topcoat to give coated surfaces a glossy finish that resists fading.

PVC plastic coatings can be used on nearly any surface, including rubber. They withstand salt, acids, alkalies, and gasoline. They also resist UV light, so they won’t lose their color when exposed to sunlight over long periods of time.

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.

These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.

Ink for porous surfaces is good for boxes, fabrics, and paper.

Ink for nonporous surfaces is good for plastics, glass, and metal.

Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.