About Pipe Size and Spray Nozzles
More
Inline Steam Cleaners
Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.
Nozzle for 1,500-psi cleaners is sold separately.
Wand | Handle | Nozzle Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Temp., °F | Lg. | Material | For Hose ID | Wand Connection Gender | Type | Material | No. of Spray Nozzles | Spray Angle | Pipe Size  | Thread Type | Gender | Each | |
| 390° | 30" | Stainless Steel | 3/4" | Male | Rigid | Plastic | 1 | 65° | 3/4 | NPT | Female | 00000000 | 0000000 |
Wand | Wand Connection | Handle | Nozzle Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Temp., °F | Lg. | Material | Pipe Size | Thread Type | Gender | Type | Material | Nozzle Holder Angle | Pipe Size | Thread Type | Gender | Each | |
| 450° | 36" | Steel | 1/2 | NPT | Female | Rigid | Zinc-Plated Steel | 45° | 3/8 | NPT | Male | 0000000 | 000000000 |
| 450° | 36" | Steel | 1/2 | NPT | Female | Swivel | Zinc-Plated Steel | 45° | 3/8 | NPT | Male | 0000000 | 00000000 |
| NPT Male Nozzles for 1,500-psi Cleaners | 0000000 | Each | 0000000 |
Inline Steam Cleaners with Control Panel
Combine the power of steam and detergent to remove dirt, grease, and heavy oils from most surfaces. Siphon detergent from a drum (not included) and use the control panel to regulate the steam/detergent mixture and change the temperature and flow rate. These cleaners connect to existing steam lines. No electrical connections required. Cleaners come with a steam gun and a wire-reinforced rubber hose.
Note: The steam gun must be within inches of your surface for effective cleaning.
Pressure, psi | Pressure Hose | Inlet Connection | Wand | Wand Connection | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Min. | Max. | Max. Temp., °F | ID | Lg., ft. | Material | Pipe Size | Thread Type | Gender | Lg. | Material | Pipe Size | Thread Type | Gender | Handle Type | No. of Spray Nozzles | Spray Angle | Each | |
| 2-3.2 | 60 | 125 | 350° | 1/2" | 25 | Rubber | 3/4 | NPT | Male | 45" | Steel | 1/2 | NPT | Female | Swivel | 2 | 30° | 000000 | 000000000 |
| 2-3.2 | 60 | 125 | 350° | 1/2" | 50 | Rubber | 3/4 | NPT | Male | 45" | Steel | 1/2 | NPT | Female | Swivel | 2 | 30° | 000000 | 00000000 |
Steam Nozzles
Specifically designed for steam, these nozzles direct steam better than standard spray nozzles.
For technical drawings and 3-D models, click on a part number.
Steam Capacity, lbs./hr. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 10 psi | @ 25 psi | @ 50 psi | @ 75 psi | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Max. Temp., °F | Spray Pattern | Spray Angle | Each | |
303 Stainless Steel | ||||||||||||
1/4 Male NPT | ||||||||||||
| 1.1 | 2.4 | 5.8 | 5 | 0.041" | 9/16" | 7/8" | 435 | 1020° | Solid Stream | 0° | 0000000 | 000000 |
| 2.4 | 5.6 | 8.3 | 8.4 | 0.051" | 9/16" | 7/8" | 435 | 1020° | Solid Stream | 0° | 0000000 | 00000 |
| 3.6 | 6.1 | 9 | 13 | 0.052" | 9/16" | 7/8" | 435 | 1020° | Solid Stream | 0° | 0000000 | 00000 |
| 5.3 | 8.2 | 13 | 19 | 0.065" | 9/16" | 7/8" | 435 | 1020° | Solid Stream | 0° | 0000000 | 00000 |
| 9.5 | 15 | 22 | 32 | 0.082" | 9/16" | 7/8" | 435 | 1020° | Solid Stream | 0° | 0000000 | 00000 |
| 15 | 20 | 32 | 45 | 0.104" | 9/16" | 7/8" | 435 | 1020° | Solid Stream | 0° | 0000000 | 00000 |
| 21 | 33 | 54 | 75 | 0.13" | 9/16" | 7/8" | 435 | 1020° | Solid Stream | 0° | 0000000 | 00000 |