These closers consist of two interconnected springs—twist them to adjust closing force. The springs retract to pull storm doors and gates closed.

Simple and compact, these closers have an arm that rolls along gates to push them closed.

Close storm doors more smoothly than standard spring closers.

With a hydraulic mechanism, these are the smoothest and quietest closers we offer for gates.

For frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern.

To protect doors and walls, these closers have a shock-absorbing stop to damp the force of doors when they’re pushed open. Designed for frequently used doors, these last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern.

There's no need to mount a closer to your door or frame—these take the place of an existing hinge pin.

These closers include a door holder, which keeps doors open with an electromagnet. When activated by a fire alarm, the magnet shuts off and releases the door.

Made of stainless steel, these springs are more corrosion resistant than steel springs.

Also known as tension and traction gas springs, these work in the opposite direction of other gas springs. Similar to a screen door closing, they're used to assist in closing covers, hoods, and doors.

Only one cutout (mortise) is needed for these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

The mounting holes form an industry-standard half-moon shape.

The hinge leaves fit in cutouts (mortises) on the edge of a door.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.