Material Material |
|---|
|
Finish Finish |
|---|
|
Overall Length Overall Length |
|---|
|
|
|
Overall Width Overall Width |
|---|
|
|
|
Draw Latch Type Draw Latch Type |
|---|
|
Latching Distance Latching Distance |
|---|
|
|
|
Strike Plate Material Strike Plate Material |
|---|
|
About Draw Latches
More
Tight-Hold Draw Latches
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
For technical drawings and 3-D models, click on a part number.
Latches | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | |||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | Each | |||
Screw On | |||||||||||||
| A | 300 Series Stainless Steel | Polished | 3/8" | 1 7/16" | 1/2" | 5/16" | 200 | No | No. 2 | 0000000 | 00000 | 0000000 | 00000 |
| B | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 3/16" | 7/16" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| B | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 3/16" | 7/16" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| C | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| C | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| D | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| D | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| E | 300 Series Stainless Steel | Polished | 1 5/16" | 1 7/16" | 1/2" | 1/4" | 400 | No | No. 5 | 0000000 | 0000 | 0000000 | 0000 |
| F | 304 Stainless Steel | Polished | 1 3/4" | 3 1/8" | 1 5/16" | 3/4" | Not Rated | No | No. 5 | 0000000 | 00000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 1/4" | 2 3/8" | 1 3/8" | 1/2" | Not Rated | No | No. 6 | 0000000 | 0000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 3/8" | 2 3/4" | 1 1/2" | 1/2" | Not Rated | No | No. 3 | 0000000 | 0000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 3/8" | 3 1/2" | 1 15/16" | 5/8" | Not Rated | No | No. 10, No. 12 | 0000000 | 00000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 7/16" | 3 7/8" | 1 7/8" | 5/8" | Not Rated | No | No. 5 | 0000000 | 00000 | 000000 | 00 |
| G | 300 Series Stainless Steel | Polished | 1 3/8" | 3 13/16" | 1 15/16" | 5/8" | Not Rated | No | No. 12, No. 5 | 0000000 | 00000 | 0000000 | 0000 |
| G | 304 Stainless Steel | Polished | 7/8" | 2" | 1 1/4" | 3/8" | Not Rated | No | No. 3 | 0000000 | 00000 | 000000 | 00 |
| G | 304 Stainless Steel | Polished | 1 3/8" | 2 11/16" | 1 1/2" | 9/16" | Not Rated | No | No. 5 | 0000000 | 0000 | 000000 | 00 |
| G | 304 Stainless Steel | Polished | 1 3/8" | 3 3/4" | 1 13/16" | 5/8" | Not Rated | No | No. 5 | 0000000 | 00000 | 000000 | 00 |
Weld On | |||||||||||||
| C | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | __ | __ | 0000000 | 0000 | 0000000 | 0000 |
| C | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | __ | __ | 0000000 | 0000 | 0000000 | 0000 |
| D | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | __ | __ | 0000000 | 0000 | 0000000 | 0000 |
| D | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | __ | __ | 0000000 | 0000 | 0000000 | 0000 |
| H | Steel | Dull | 1 1/4" | 2 3/8" | 1 3/8" | 1/2" | Not Rated | __ | __ | 0000000 | 0000 | 000000 | 00 |
T-Handle Tight-Hold Draw Latches
These latches are typically used to secure hoods and covers. Designed with a spring-loaded handle, they withstand vibration better than other standard latches for a more secure hold. The overall length listed includes the strike plate.
Style C latches have adjustable mounting bases, so you can mount them horizontally or vertically. Line up the base with the hook for horizontal mounting, or bend it perpendicular to the hook for vertical mounting.
For technical drawings and 3-D models, click on a part number.
Latches | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | |||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity | Fasteners Included | Screw Size | Each | Each | |||
| A | Black Painted Steel | __ | 3 1/4" | 3 7/8" | 2 11/16" | 1 5/16" | Not Rated | No | 1/4" | 0000000 | 00000 | 0000000 | 00000 |
| A | Chrome-Plated Steel | Polished | 3 1/4" | 3 7/8" | 2 11/16" | 1 5/16" | Not Rated | No | 1/4" | 0000000 | 0000 | 0000000 | 0000 |
| A | 304 Stainless Steel | Polished | 3 1/4" | 3 7/8" | 2 11/16" | 1 5/16" | Not Rated | No | 1/4" | 0000000 | 00000 | 0000000 | 0000 |
| B | Black Painted Steel | __ | 3 1/2" | 4 1/2" | 2 11/16" | 1 5/16" | Not Rated | No | 1/4" | 0000000 | 0000 | 0000000 | 0000 |
| B | Chrome-Plated Steel | Polished | 3 1/2" | 4 1/2" | 2 11/16" | 1 5/16" | Not Rated | No | 1/4" | 0000000 | 0000 | 0000000 | 0000 |
| B | 304 Stainless Steel | Polished | 3 1/2" | 4 1/2" | 2 11/16" | 1 5/16" | Not Rated | No | 1/4" | 0000000 | 00000 | 0000000 | 0000 |
| C | Black Painted Steel | __ | 2 3/4" | 3 1/2" | 1 15/16" | 1 5/16" | Not Rated | No | 1/4" | 0000000 | 0000 | 0000000 | 0000 |
Tight-Hold Draw Latches with Safety Catch
To prevent accidental opening, this latch has a safety catch. Designed with compression springs to withstand vibration better than standard draw latches, it offers a more secure hold. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
For technical drawings and 3-D models, click on a part number.
Latches | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | |||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | Each | |||
| A | Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 5/8" | 400 | __ | __ | 0000000 | 00000 | 000000 | 00 |
| A | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 5/8" | 400 | __ | __ | 0000000 | 00000 | 000000 | 00 |
| A | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 3/16" | 5/8" | 400 | No | No. 6 | 0000000 | 00000 | 0000000 | 00000 |
| B | 304 Stainless Steel | Polished | 1 11/16" | 3 1/4" | 1 5/16" | 3/4" | Not Rated | No | M4 | 0000000 | 00000 | 000000 | 00 |
| B | 304 Stainless Steel | Polished | 1 13/16" | 3 15/16" | 2 1/16" | 3/4" | Not Rated | No | M4 | 0000000 | 00000 | 000000 | 00 |
Corner-Mount Tight-Hold Draw Latches
Mount these latches on a corner to draw perpendicular surfaces together. Designed with compression springs to withstand vibration better than standard draw latches, they offer a more secure hold. The overall length listed includes the strike plate.
For technical drawings and 3-D models, click on a part number.
Weather-Resistant Draw Latches
These latches have a rubber body that absorbs vibration and stretches to compensate for slight misalignment. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Strike Plate Material | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | ||
| G | Black Rubber | Plastic | 3 3/16" | 6 11/16" | 1 7/8" | 1 1/8" | Not Rated | No | No. 10 | 00000000 | 000000 |
| H | Black Rubber | Plastic | 3 3/16" | 6 11/16" | 1 7/8" | 1 1/8" | Not Rated | No | No. 10 | 00000000 | 00000 |
| J | Black Rubber | Zinc-Plated Steel | 1" | 3 1/8" | 3/4" | 1" | Not Rated | No | No. 4 | 0000000 | 0000 |
| J | Black Rubber | 304 Stainless Steel | 3/4" | 2 7/16" | 9/16" | 11/16" | Not Rated | No | No. 4 | 0000000 | 0000 |
Tight-Hold Turn-to-Open Draw Latches
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | |
Surface Mount | ||||||||||
| Zinc-Plated Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| Zinc-Plated Steel | Dull | 3/4" | 2 3/4" | 2 1/2" | 13/16" | 400 | No | No. 8 | 0000000 | 0000 |
| Zinc-Plated Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | No | No. 10 | 0000000 | 00000 |
| Black Powder-Coated Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 270 | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 190 | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | No | No. 10 | 0000000 | 00000 |
Tight-Hold Padlockable Draw Latches
Designed with compression springs to withstand vibration better than other standard padlockable draw latches, these offer a more secure hold. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
For technical drawings and 3-D models, click on a part number.
Latches | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | ||||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Each | Each | |||
| A | Zinc-Plated Steel | Dull | 1 1/16" | 3" | 1 3/8" | 13/16" | Not Rated | 5/16" | No | No. 6 | 0000000 | 00000 | 000000 | 00 |
| A | Zinc-Plated Steel | Dull | 1 1/4" | 3 5/8" | 1 13/16" | 15/16" | Not Rated | 3/8" | No | No. 10, No. 12 | 0000000 | 00000 | 000000 | 00 |
| B | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 3/16" | 15/16" | 400 | 3/8" | No | No. 6 | 0000000 | 0000 | 0000000 | 00000 |
Corner-Mount Tight-Hold Padlockable
Draw Latches with Safety Catch
Mount this latch on a corner to draw perpendicular surfaces together. It has a safety catch to prevent accidental opening. Designed with compression springs to withstand vibration better than standard padlockable draw latches, it offers a more secure hold. The overall length listed includes the strike plate.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Straight Strike Plate | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Each | |
| 304 Stainless Steel | Polished | 1 1/8" | 2 9/16" | 1 9/16" | 5/8" | Not Rated | 3/16" | No | M4 | 0000000 | 000000 |
Turn-to-Open Keyed Draw Locks
Lift and turn the handle 180° to open and close this lock. It has a spring-loaded handle that provides a tight hold and compensates for slight misalignment. It's keyed alike, choose it if you need several locks that open with the same key. Capacity is the maximum amount of force the latch can withstand.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Each | |
| Zinc-Plated Steel | Dull | 3/4" | 3 1/2" | 2 1/2" | 13/16" | 400 | No | No. 8 | 801 | 2 | 0000000 | 000000 |