Spring Hooks | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Maximum Load Maximum Load

Less than 50 lbs.

	Maximum Spring Rate Tolerance Maximum Spring Rate Tolerance

	Minimum Load Minimum Load

	Minimum Spring Rate Tolerance Minimum Spring Rate Tolerance

	Capacity Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

20,000 to 29,999 lbs.

30,000 to 39,999 lbs.

40,000 lbs. or greater

Not Rated

	Tip Style Tip Style


Hook	Lift

90° Angle	Push

45° Angle	Straight

Push/Pull	Blunt

Brush	Fork

Scraper	Multi-Angle

20° Angle

	Latch Type Latch Type


Spring	Slide Bolt

Locking

	Thickness Thickness

	Opening Width Opening Width

	Inside Length Inside Length

	Finish Finish

5,291 Products

Snaps

Light Duty Snaps with Eye

Light Duty Snaps with Swivel Eye

Light Duty Snaps with Swivel Eye for Webbing

Light Duty Snaps for Webbing

Light Duty Snaps

Light Duty Snaps with Swivel Hook

Light Duty Snaps with Hook

Snaps with Swivel Eye

These snaps have an eye that rotates for easy positioning.

Snaps with Eye

Create fast connections with items, such as rope, chain, and straps.

Dual Snap Connectors

Load-Rated Snaps with Swivel Eye

Load-Rated Snaps with Eye

Slide-Bolt Snaps

Slide-Bolt Snaps with Swivel Eye

Dual Slide-Bolt Snaps

Slide-Bolt Snaps with Split Swivel Ring

Slide-Bolt Snaps with Flat Swivel Eye for Webbing

Slide-Bolt Snaps with Eye

Slide-Bolt Snap with Split Swivel Ring Assortments

Slide-Bolt Snaps with Hook

Slide-Bolt Snaps with Flat Eye for Webbing

Locking Snaps

Trigger-Release Snaps with Eye

Squeeze the trigger to quickly release the latch.

Safety Trigger-Release Snaps with Eye

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Snaps with Trigger-Release Latches on Both Ends

Wide-Mouth Trigger-Release Snaps with Eye

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

Overlapping-Arm Snaps with Swivel Eye

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

Wire-Lockable Slide-Bolt Snaps with Swivel Eye

Lock the bolt with wire or a cable tie for a secure connection.

Carabiners

Carabiners—Not for Lifting

Screw-Locking Carabiners—Not for Lifting

Lock by screwing the latch into the body.

Twist-Locking Carabiners—Not for Lifting

To open, lift and twist the latch 90°.

Slide-Release Carabiners—Not for Lifting

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

Hooks for Rope and Chain

Half-Link Hooks—For Lifting

These have a removable half-link to attach large rings, links, and other closed fittings.

Eye Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Oversized Eye Hooks with Swivel—For Lifting

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks with Swivel—For Lifting

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

Oversized Eye Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Clevis Hooks with Spring-Close Locking
Latch and Ball-Bearing Swivel—For Lifting

A ball-bearing swivel allows these to rotate under load. Attach to chain by inserting the included pin through a link.

Clevis Hooks with Spring-Close
Locking Latch and Swivel—For Lifting

These rotate for easy positioning before a load is applied.

Eye Hooks with Spring-Close Locking
Latch and Swivel—For Lifting

These rotate for easy positioning before a load is applied.

Threaded-Stud Hooks with
Spring-Close Locking Latch—For Lifting

Screw these hooks into place and secure with the included nut.

Grab Hooks with Clevis and Securing Pin—For Lifting

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.

Grab Hooks with Eye and Securing Pin—For Lifting

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

Swivel Eye Hooks—Not for Lifting

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks—Not for Lifting

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Weld-On Hooks—Not for Lifting

Weld these hooks into place.

Pin-Release Shackles—Not for Lifting

Pin-Release Eye Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Pin-Release Clevis Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Picks and Pullers

Small Parts Positioner Sets

The assorted picks in these sets are used to install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Two-Tip Small Parts Positioners

A different tip at each end installs and positions tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Small Parts Positioners

Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Picks

Use these tools to hold, separate, and position wire, springs, and other small parts.

Pick Sets

The assorted tools in these sets are used to hold, separate, and position wire, springs, and other small parts.

Pick Sets with Magnetic Retrievers

The handles of these assorted picks have a magnet at the end to pick up small steel objects. Use to hold and position wire, springs, and other small parts.

Picks with Magnetic Retriever

The handle has a magnet at the end to pick up small steel objects. Use these picks to hold and position wire, springs, and other small parts.

Changeable-Tip Picks

Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.

Changeable-Tip Pick Sets

Sets include a handle and an assortment of tips for holding and positioning wire, springs, and other small parts.

Two-Tip Pick Sets

Hold, separate, and position small parts with one tool. These sets include assorted picks with a different tip at each end.

Two-Tip Picks

A different tip at each end allows you to install, extract, and position parts with one tool.

Deep-Offset Picks

Reach around obstructions and into tight spaces with picks that have long, angled tips. Use these tools to hold, separate, and position wire, springs, and other small parts.

Nonsparking Picks

Made of beryllium copper that is FM approved, these picks satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Solder-Repelling Pick Sets

Solder won’t stick to these assorted picks, which are used for positioning circuit board components.

Solder-Repelling Picks

Position circuit board components without solder sticking to these picks.

Electrical-Insulating Picks

An insulated handle protects against accidental contact with live electrical circuits. These picks are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Electrical-Insulating Pick Sets

These assorted picks have insulated handles that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Nonmarring Picks

Avoid nicking or scratching sensitive components. Also known as spudgers, these picks are good for adjusting small wires or separating press-fit plastic components.

Precision-Tip Picks

Similar to dental instruments, these needle-sharp picks are suitable for work around delicate circuits and components.

Precision-Tip Pick Sets

The assorted needle-sharp picks in these sets are similar to dental instruments and suitable for work around delicate circuits and components.

Retrievers

Hook Retrievers

Use these long-handled retrievers to grab and pull objects in hard-to-reach spots.

Electrical-Insulating Hook Retrievers

Also known as rescue hooks, these retrievers are often used to pull an injured worker away from electrical hazards without risking the safety of other workers. They have a fiberglass handle and insulated hook to protect against accidental contact with live electrical circuits. The handle is tested to meet the requirements of ASTM F711.

Pike Retrievers

The pointed tip with curved hook is good for holding and pulling cylindrical material.

Extension Springs

Extension Springs with Hook Ends

Use these steel springs in noncorrosive environments.

Corrosion-Resistant Extension Springs with Hook Ends

Made of stainless steel, these springs are more corrosion resistant than steel extension springs.

Extension Springs with Special Ends

For specialty applications and connections, these springs have unique end types.

Extension Springs with Loop Ends

Use these steel springs in noncorrosive environments.

Corrosion-Resistant Extension Springs with Loop Ends

Made of stainless steel, these springs are more corrosion resistant than steel extension springs.

Mil. Spec. Extension Springs with Loop Ends

These steel springs meet MS 24586 and come with a traceable lot number and material test report.

Made-to-Order Extension Springs

Whatever the size, we'll get the spring you need.

Overload-Prevention Extension Springs

These zinc-plated steel springs have mild corrosion resistance.

Corrosion-Resistant
Overload-Prevention Extension Springs

Made of stainless steel, these springs are more corrosion resistant than steel extension springs.

Extra-Stretch Extension Springs

These fabric-covered rubber springs stretch to up to three times their original length—much farther than traditional extension springs, tie downs, and shock cords.

Snaps

Light Duty Snaps with Eye

Light Duty Snaps with Swivel Eye

Light Duty Snaps with Swivel Eye for Webbing

Light Duty Snaps for Webbing

Light Duty Snaps

Light Duty Snaps with Swivel Hook

Light Duty Snaps with Hook

Snaps with Swivel Eye

Snaps with Eye

Dual Snap Connectors

Load-Rated Snaps with Swivel Eye

Load-Rated Snaps with Eye

Slide-Bolt Snaps

Slide-Bolt Snaps with Swivel Eye

Dual Slide-Bolt Snaps

Slide-Bolt Snaps with Split Swivel Ring

Slide-Bolt Snaps with Flat Swivel Eye for Webbing

Slide-Bolt Snaps with Eye

Slide-Bolt Snap with Split Swivel Ring Assortments

Slide-Bolt Snaps with Hook

Slide-Bolt Snaps with Flat Eye for Webbing

Locking Snaps

Trigger-Release Snaps with Eye

Safety Trigger-Release Snaps with Eye

Snaps with Trigger-Release Latches on Both Ends

Wide-Mouth Trigger-Release Snaps with Eye

Overlapping-Arm Snaps with Swivel Eye

Wire-Lockable Slide-Bolt Snaps with Swivel Eye

Carabiners

Carabiners—Not for Lifting

Screw-Locking Carabiners—Not for Lifting

Twist-Locking Carabiners—Not for Lifting

Slide-Release Carabiners—Not for Lifting

Hooks for Rope and Chain

Half-Link Hooks—For Lifting

Eye Hooks—For Lifting

Clevis Hooks—For Lifting

Oversized Eye Hooks with Swivel—For Lifting

Clevis Hooks with Swivel—For Lifting

Oversized Eye Hooks—For Lifting

Clevis Hooks with Spring-Close LockingLatch and Ball-Bearing Swivel—For Lifting

Clevis Hooks with Spring-CloseLocking Latch and Swivel—For Lifting

Eye Hooks with Spring-Close LockingLatch and Swivel—For Lifting

Threaded-Stud Hooks withSpring-Close Locking Latch—For Lifting

Grab Hooks with Clevis and Securing Pin—For Lifting

Grab Hooks with Eye and Securing Pin—For Lifting

Swivel Eye Hooks—Not for Lifting

Clevis Hooks—Not for Lifting

Weld-On Hooks—Not for Lifting

Pin-Release Shackles—Not for Lifting

Pin-Release Eye Shackles—Not for Lifting

Pin-Release Clevis Shackles—Not for Lifting

Picks and Pullers

Small Parts Positioner Sets

Two-Tip Small Parts Positioners

Small Parts Positioners

Picks

Pick Sets

Pick Sets with Magnetic Retrievers

Picks with Magnetic Retriever

Changeable-Tip Picks

Changeable-Tip Pick Sets

Two-Tip Pick Sets

Two-Tip Picks

Deep-Offset Picks

Nonsparking Picks

Solder-Repelling Pick Sets

Solder-Repelling Picks

Electrical-Insulating Picks

Electrical-Insulating Pick Sets

Nonmarring Picks

Precision-Tip Picks

Precision-Tip Pick Sets

Retrievers

Hook Retrievers

Electrical-Insulating Hook Retrievers

Pike Retrievers

Extension Springs

Extension Springs with Hook Ends

Clevis Hooks with Spring-Close Locking
Latch and Ball-Bearing Swivel—For Lifting

Clevis Hooks with Spring-Close
Locking Latch and Swivel—For Lifting

Eye Hooks with Spring-Close Locking
Latch and Swivel—For Lifting

Threaded-Stud Hooks with
Spring-Close Locking Latch—For Lifting

Corrosion-Resistant
Overload-Prevention Extension Springs