Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Thread onto machinery or attach a knob or handle to the threaded spindle.

A T-handle makes these spring plungers easy to grip.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

An L-handle takes up less space than a T-handle.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Two holes in the plate allow these plungers to be mounted to a flat surface.

Insert the nose into a panel; then thread on the nut and tighten using an installation wrench.

Weld these catches in place for a strong permanent hold.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

Mount these latches on a corner to draw perpendicular surfaces together.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.

An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.

When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.

Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.