Set the tang in a slot below the work surface to prevent thin material from sliding underneath the face.

Sealed at the top to prevent debris from getting inside and making them seize up, these guide pins are a good choice for machining fixtures.

Thread in a screw, handle, or other part to create the right size and shape guide pin for your application.

Noses are up to four times longer than standard long-nose press-fit spring plungers.

Install with a driver.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

The ring allows you to attach these spring plungers to a lanyard.

Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.

Install by hand or with a hex key in low-clearance applications.

Use an arbor press or similar pressure tool to install these spring plungers into a panel.

Add a knob or handle to the threaded shank.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

Two holes in the plate allow these plungers to be mounted to a flat surface.

Insert the nose into a panel; then thread on the nut and tighten using an installation wrench.

Install these spring plungers with a screwdriver—they're slotted on one or both ends.

The flangeless design allows these spring plungers to mount flush with a surface.

Weld these catches in place for a strong permanent hold.