Spring Type Spring Type 

Compression  
System of Measurement System of Measurement 


Length Length  Show 


Length Length  Hide 

Rate Rate 


Compressed Length @ Maximum Load Compressed Length@ Maximum Load 


Material Material 


Energy Capacity Energy Capacity 


Maximum Temperature Maximum Temperature 


Minimum Temperature Minimum Temperature 


Hardness Hardness 


Color Color 

Black  
Flange OD Flange OD 


Flange Thickness Flange Thickness 


Base Diameter Base Diameter 


Compressed OD @ Maximum Load Compressed OD@ Maximum Load 


Mounting Hole Diameter (A) Mounting Hole Diameter (A) 


For the heaviest loads, these springs have more than double the load capacity of HighLoad FastenerMount Compression Springs. Secure by inserting a fastener through the hole at the base. Springs are a polyester/rubber blend that is wear, oil, and fuel resistant.
Energy is calculated in one of two ways. For an object that is dropped, energy equals the weight of the item multiplied by distance dropped. For an object moving horizontally, energy equals half of the mass of the item multiplied by velocity squared (1/2 mv²).
For technical drawings and 3D models, click on a part number.
Lg.  OD  ID  Base Dia.  Compressed Lg. @ Max. Load  Compressed OD @ Max. Load  Max. Load, lbs.  Energy Capacity, in.lbs.  Mounting Hole Dia. (A)  Mounting Fasteners Included  Material  Hardness  Temperature Range, °F  Each  
1.188"  1.31"  0.66"  1.16"  0.67"  1.7"  1,600  400  0.31"  No  Polyester/Rubber Blend  Durometer 55D  40° to 120°  0000000  000000 
Flanges on the ends of these springs provide a flat mounting surface. Springs are a polyester/rubber blend that is wear, oil, and fuel resistant.
As you squeeze a compression spring, it pushes back to return to its original length. Rate is the amount of force required for every inch of compression. The higher the rate, the harder it is to compress the spring.
For technical drawings and 3D models, click on a part number.
Flange  

Lg.  OD  ID  OD  Thick.  Compressed Lg. @ Max. Load  Max. Load, lbs.  Rate, lbs./in.  Material  Hardness  Temperature Range, °F  Each  
1.188"  0.74"  0.5"  0.95"  0.1"  0.67"  40  70  Polyester/Rubber Blend  Durometer 55D  40° to 120°  000000  00000 