McMaster-Carr

When replacing an existing closer, remove the cover and match the model number and/or mounting hole pattern to a closer in our offering. Or, use one of our closers and a universal mounting plate that matches most hole patterns.

If you are installing a new closer, choose one that works for your door width. Due to added resistance from wind, closers typically accommodate smaller exterior doors than interior doors.

Mounting Positions

There are three typical mounting positions for door closers; many of our closers are versatile and can be mounted in any of these positions. To determine opening direction, stand on the side of the door where the closer will be mounted. If the door opens towards you it opens in; opens away from you it opens out.

Door Mount, Opens In—Also known as regular arm mount, this position allows the door to open in toward the closer.

Door Mount, Opens Out—Also known as parallel arm mount, the arm lays parallel with the door in the closed position.

Frame Mount, Opens Out—Also known as top frame mount, this position is often used for exterior doors.

Freezer Door Closers

Often used on large freezer and cold-storage doors, these closers are designed for doors that weigh 200 lbs. or more. Mount them to the face of your door and frame just above the door's lowest hinge. These free-moving closers pull doors shut after you've opened them. They are reversible for right or left door-swing directions. Offset is the space between the door face and the frame when the door is closed.

For Door Swing Direction	For Max. Door Offset	Projection	Opening/Closing Action	Mounting Location	Range of Motion	Mounting Hardware Included	Material	Finish		Each

Reversible	7/8"	2 7/16"	Free Moving	Door, Frame	175°	Yes	Iron	Zinc	0000000	0000000

Terms and Conditions and Privacy Policy