30mm Springs | McMaster-Carr

Squeeze these springs and they’ll push right back to their original length. When compressed, they apply steady pressure to keep components securely in place. Release the pressure and they snap back instantly, just like the tip of a ballpoint pen.

Spring Steel—Strong and resilient, but best suited for dry environments since moisture will cause these springs to rust.

Corrosion-Resistant 302 Stainless Steel—Won’t corrode from exposure to moisture and mild chemicals, including ammonia often found in cleaning solutions. These springs are easier to compress than steel, but can’t handle as high a load.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant stainless steel springs won't degrade when exposed to salt water and harsh chemicals. They're easier to compress than steel, but can’t handle as high a load.

	OD, mm	ID, mm	Wire Dia., mm	Compressed Lg. @ Max. Load, mm	Max. Load, lb.	Spring Rate, lbf/mm	End Type	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel



	30	5.5	4.5	0.5	12.6	1.4	0.09	Closed	DIN 2095, DIN 2098, DIN 17223	5	94125K428	00000


	Corrosion-Resistant 302 Stainless Steel



			30	5.5	4.5	0.5	10.6	1.5	0.08	Closed	DIN 2095	5	2006N305	00000


			30	6.8	5.8	0.5	8.7	1.2	0.06	Closed	DIN 2095	5	2006N306	00000
			30	10.8	9.2	0.8	9.8	2.8	0.14	Closed	DIN 2095	5	2006N307	00000
			30	18	14	2	12.5	37	2.1	Closed and Ground	DIN 2095	5	2006N308	00000


			Highly Corrosion-Resistant 316 Stainless Steel



					30	3	1.98	0.51	22.4	2	0.26	Closed and Ground	—	1	8969T369	0000


					30	3	2.28	0.36	19.7	0.7	0.07	Closed and Ground	—	1	8969T33	0000
					30	3	2.4	0.3	15.9	0.4	0.03	Closed	—	1	8969T267	0000
					30	3	2.5	0.25	14.1	0.2	0.01	Closed	—	1	8969T216	0000
					30	3.71	2.49	0.61	21.2	2.8	0.32	Closed and Ground	—	1	8969T474	0000
					30	4.6	3.38	0.61	20.1	2.3	0.23	Closed and Ground	—	1	8969T491	0000
					30	4.6	3.88	0.36	16.5	0.4	0.03	Closed and Ground	—	1	8969T342	0000
					30	5.5	4.5	0.5	15.1	1.1	0.07	Closed and Ground	—	1	8969T389	0000
					30	5.99	3.81	1.09	24	9.5	1.6	Closed and Ground	—	1	8969T783	0000
					30	5.99	4.37	0.81	20.8	4.1	0.44	Closed and Ground	—	1	8969T629	0000
					30	5.99	4.77	0.61	15.9	1.8	0.12	Closed and Ground	—	1	8969T512	0000


					30	5.99	4.97	0.51	14.6	1	0.06	Closed and Ground	—	1	8969T405	0000
					30	6.8	5.8	0.5	13.4	0.9	0.05	Closed and Ground	—	1	8969T412	0000
					30	7.49	5.61	0.97	19.9	5.5	0.54	Closed and Ground	—	1	8969T701	0000
					30	7.49	5.87	0.81	18.5	3.3	0.29	Closed and Ground	—	1	8969T652	0000
					30	7.49	6.17	0.66	17.3	1.8	0.14	Closed and Ground	—	1	8969T56	0000
					30	7.49	6.37	0.56	15.7	1.1	0.08	Closed and Ground	—	1	8969T45	0000
					30	8.99	6.81	1.09	20.6	6.6	0.7	Closed and Ground	—	1	8969T804	0000
					30	8.99	7.11	0.97	18.4	4.6	0.4	Closed and Ground	—	1	8969T719	0000
					30	8.99	7.67	0.66	16.2	1.5	0.11	Closed and Ground	—	1	8969T578	0000
					30	10.8	8.2	1.3	19.6	9	0.87	Closed and Ground	—	1	8969T886	0000


					30	10.8	9.02	0.89	16.2	3	0.22	Closed and Ground	—	1	8969T684	0000
					30	10.8	9.2	0.8	13.5	2.3	0.14	Closed and Ground	—	1	8969T669	0000
					30	11.99	10.11	0.97	16.1	3.5	0.25	Closed and Ground	—	1	8969T734	0000
					30	13.51	11.33	1.09	14.1	4.5	0.28	Closed and Ground	—	1	8969T821	0000
					30	15.01	11.81	1.6	18.3	12	1	Closed and Ground	—	1	8969T944	0000
					30	15.01	12.63	1.19	12	5.2	0.29	Closed and Ground	—	1	8969T839	0000
					30	18	14	2.03	21.5	19	2.2	Closed and Ground	—	1	8969T972	0000
					30	18.29	15.49	1.4	15.7	6.8	0.47	Closed and Ground	—	1	8969T914	0000

Slotted Spring Pins

End View

Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg., mm	For Hole Dia., mm	Wall Thk., mm	Double Shear Breaking Strength	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel







				2 mm Diameter

				30	2	0.2	330 lbf	Rockwell C42	DIN 7346, ISO 13337	100	97161A113	000000


				30	2 to 2.1	0.4	600 lbf	Rockwell C42	ISO 8752	100	91611A114	00000




						2.5 mm Diameter

						30	2.5	0.25	530 lbf	Rockwell C42	DIN 7346, ISO 13337	50	97161A125	00000


						30	2.5 to 2.6	0.5	950 lbf	Rockwell C42	ISO 8752	100	91611A099	00000




								3 mm Diameter

								30	3	0.3	780 lbf	Rockwell C42	DIN 7346, ISO 13337	50	97161A139	00000


								30	3 to 3.1	0.6	1,400 lbf	Rockwell C42	ISO 8752	100	91611A172	00000




										3.5 mm Diameter

										30	3.5 to 3.65	0.8	2,000 lbf	Rockwell C42	ISO 8752	100	91611A189	00000




												4 mm Diameter

												30	4	0.5	1,700 lbf	Rockwell C42	DIN 7346, ISO 13337	50	97161A155	00000


												30	4 to 4.2	0.8	2,500 lbf	Rockwell C42	ISO 8752	100	91611A213	00000




														5 mm Diameter

														30	5	0.5	2,300 lbf	Rockwell C42	DIN 7346, ISO 13337	50	97161A173	00000


														30	5 to 5.2	1	3,900 lbf	Rockwell C42	ISO 8752	100	91611A313	00000




6 mm Diameter

30	6															0.75	4,000 lbf	Rockwell C42	DIN 7346, ISO 13337	25	97161A192	00000


30	6 to 6.2															1.2	5,800 lbf	Rockwell C42	ISO 8752	50	91611A410	00000




		8 mm Diameter

		30	8													0.75	5,300 lbf	Rockwell C42	DIN 7346, ISO 13337	10	97161A213	0000


		30	8 to 8.25													1.5	9,600 lbf	Rockwell C42	ISO 8752	50	91611A510	00000




				10 mm Diameter

				30	10											1	5,300 lbf	Rockwell C42	DIN 7346, ISO 13337	10	97161A233	0000


				30	10 to 10.3											2	15,700 lbf	Rockwell C42	ISO 8752	25	91611A610	00000




						12 mm Diameter

						30	12									1	10,700 lbf	Rockwell C42	DIN 7346, ISO 13337	5	97161A249	0000


						30	12 to 12.3									2.5	23,000 lbf	Rockwell C42	ISO 8752	5	91611A711	00000




								13 mm Diameter

								30	13							1.2	14,800 lbf	Rockwell C42	DIN 7346, ISO 13337	5	97161A270	00000




										16 mm Diameter

										30	16					1.5	22,000 lbf	Rockwell C42	DIN 7346, ISO 13337	1	97161A285	0000




																21 mm Diameter

												30	21			2	37,700 lbf	Rockwell C42	DIN 7346, ISO 13337	1	97161A295	0000


												Corrosion-Resistant 18-8 Stainless Steel







															2 mm Diameter

															30		2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A212	0000




															2.5 mm Diameter

															30		2.5 to 2.6	0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A254	0000




																		3 mm Diameter

		30	3 to 3.1															0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A412	0000




																		3.5 mm Diameter

																		30	3.5 to 3.6	0.7	Not Rated	Not Rated	ISO 8752	50	91610A454	0000




																		4 mm Diameter

																		30	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A512	0000




						5 mm Diameter

						30	5 to 5.2													1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A612	0000




																				6 mm Diameter

								30	6 to 6.2											1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A712	0000




																				8 mm Diameter

										30	8 to 8.25									1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A812	0000




																				10 mm Diameter

												30								10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A916	0000

Coiled Spring Pins


	End View

The best spring pins for joining parts exposed to vibration and shock. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Because of their spiral shape, they flex to conform to holes that aren’t perfectly round.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

	For Hole Dia., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel







			3 mm Diameter

			30	3.000 to 3.100	1,200	Rockwell C43	DIN 7343, ISO 8750	25	91612A230	000000




					3.5 mm Diameter

					30	3.500 to 3.600	1,600	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	91612A310	00000




							4 mm Diameter

							30	4.000 to 4.100	2,100	Rockwell C43	DIN 7343, ISO 8750	25	91612A240	00000




									5 mm Diameter

									30	5.000 to 5.100	3,300	Rockwell C43	DIN 7343, ISO 8750	25	91612A736	00000




											6 mm Diameter

											30	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	10	91612A838	0000




													8 mm Diameter

													30	8.000 to 8.200	8,700	Rockwell C43	DIN 7343, ISO 8750	5	91612A245	0000


													Corrosion-Resistant 18-8 Stainless Steel







																	3 mm Diameter

																	30	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	10	91612A159	0000




																			4 mm Diameter

30																			4.000 to 4.100	1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	91612A338	00000




	5 mm Diameter

	30	5.000 to 5.100																	2,500	Not Rated	DIN 7343, ISO 8750	5	91612A182	00000




																			6 mm Diameter

			30	6.000 to 6.100															3,700	Not Rated	DIN 7343, ISO 8750	5	91612A197	00000