No need to drill new holes—these closers have a mounting plate that fits the hole patterns of most closers from Norton, LCN, Yale, Corbin Russwin, and Dorma. Designed for frequently used doors, they last twice as long as standard door closers. These free-moving closers pull doors shut after you've opened them and are reversible for right or left door-swing directions. They meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. They also meet UL 10C for fire-rated doors, which meet positive pressure fire test standards.

For frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.

To determine door swing direction, stand on the side of the door where it swings away from you. If it opens to the right, select a right closer; if it opens to the left, select a left closer. Reversible closers are for right or left door-swing directions.

Free-moving closers pull doors shut after you've opened them.

Hold-open closers hold doors open until you close them with a slight push or pull on the door.

These closers can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. They are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 2 or ANSI A156.4 Grade 3 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.

Free-moving closers pull doors shut after you've opened them.

Hold-open closers hold doors open until you close them with a slight push or pull on the door.

A built-in stop prevents doors from opening too far—good when wall- or floor-stops can’t be used. Designed for frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. These closers are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.

Free-moving closers pull doors shut after you've opened them.

Hold-open closers hold doors open until you close them with a slight push or pull on the door.

To protect doors and walls, these closers have a shock-absorbing stop to damp the force of doors when they’re pushed open. Designed for frequently used doors, these last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. These closers are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.

Free-moving closers pull doors shut after you've opened them.

Hold-open closers hold doors open until you close them with a slight push or pull on the door.

These closers include a door holder, which keeps doors open with an electromagnet. When activated by a fire alarm, the magnet shuts off and releases the door. Hardwire these closers directly into your fire alarm system. Designed for frequently used doors, they last longer than standard door closers. They are reversible for right or left door-swing directions. All meet ANSI/BHMA A156.15 durability, strength, and performance standards for release devices—closer holder, electromagnetic, and electromechanical.

For opens-in closers, the door frame cannot project more than 1/8" from the door's face. For opens-out closers, the frame cannot project more than 3 1/2" from the door's face.

To eliminate slamming and smashed fingers, these supports automatically pull lids shut when they approach the closed position. Raise the lid until the hold-open mechanism on the support is engaged; slightly lift it again to release the hold and close the lid. These supports can be used individually but should be used in pairs for lids longer than 24". Mounting position is determined as you look into your cabinet or chest. All of these supports are rated for torque instead of maximum lid weight. Calculate your lid's torque and make sure it falls within the range listed—too much torque will cause your lid to slam; too little will prevent it from closing. Torque = Lid Height (inches) × 0.5 × Lid Weight (lbs.). Supports with a speed adjustment screw allow you to control their closing speed.

Supports that hold lid closed are designed to hold lids in the closed position.

Supports for lids that open up from the side are often used in overhead installations.

For technical drawings and 3-D models, click on a part number.