Choose a Category
Clear All
Spring Type Spring Type |
|---|
 | Compression |
End Type End Type |
|---|
 | Closed and Ground |
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
Rate Rate |
|---|
|
Washer Type Washer Type |
|---|
 | Wave |
Specifications Met Specifications Met |
|---|
|
Hardness Hardness |
|---|
|
About Washers
More
Compression Springs
As you squeeze a compression spring, it pushes back to return to its original length. Rate is the amount of force required for every inch of compression or, for metric springs, millimeter of compression. The higher the rate, the harder it is to compress the spring.
Springs with closed and ground ends sit flat, so they won’t buckle.
For technical drawings and 3-D models, click on a part number.
Inch
Wire | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| OD | ID | Dia. | Compressed Lg. @ Max. Load | Max. Load, lbs. | Rate, lbs./in. | Material | End Type | Pkg. Qty. | Pkg. | |
0.969" Lg. | ||||||||||
| 0.5" | 0.356" | 0.072" | 0.54" | 21.4 | 59.5 | Phosphor Bronze | Closed and Ground | 6 | 00000000 | 000000 |
Metric Single-Wave Washers
Bronze
These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces. You can also use them to damp vibration.
Bronze washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.
For technical drawings and 3-D models, click on a part number.
| For Screw Size | ID, mm | OD, mm | Thick., mm | Overall Ht., mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Bronze | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| M3 | 3.2 | 8.0 | 0.5 | 1.6 | Not Rated | DIN 137B | 25 | 000000000 | 000000 |
| M4 | 4.3 | 9.0 | 0.5 | 2.0 | Not Rated | DIN 137B | 25 | 000000000 | 00000 |
| M5 | 5.3 | 11.0 | 0.5 | 2.2 | Not Rated | DIN 137B | 10 | 000000000 | 0000 |
| M6 | 6.4 | 12.0 | 0.5 | 2.6 | Not Rated | DIN 137B | 10 | 000000000 | 0000 |
| M8 | 8.4 | 15.0 | 0.8 | 3.0 | Not Rated | DIN 137B | 5 | 000000000 | 0000 |
| M10 | 10.5 | 21.0 | 1.0 | 4.2 | Not Rated | DIN 137B | 1 | 000000000 | 0000 |
| M12 | 13.0 | 24.0 | 1.2 | 5.0 | Not Rated | DIN 137B | 1 | 000000000 | 0000 |
V-Belts
