System of Measurement System of Measurement |
---|
|
Material Material |
---|
|
Bore Type Bore Type | Show |
---|
![]() | Clamping |
Component Component |
---|
![]() | Gear |
Pitch Diameter Pitch Diameter |
---|
Gear Type Gear Type |
---|
![]() | Spur |
OD OD |
---|
Pressure Angle Pressure Angle |
---|
|
Teeth Heat Treatment Teeth Heat Treatment |
---|
|
Hub Material Hub Material |
---|
|
Color Color |
---|
![]() | White |
Fabrication Fabrication |
---|
|
More
The current industry standard, these 20° pressure angle gears have thicker, stronger teeth than 14½° pressure angle gears. Compared to plastic gears and racks, they’re better for high-load, high-speed, and heavy duty applications. Also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion. To minimize your footprint, mount one or more standard gears inside of an internal gear.
For components to mesh correctly, they must have the same pressure angle and pitch/module.
Gears with teeth that are not hardened can be hardened to fit your application.
Stainless steel gears and racks resist rust in damp and wet environments, so they're commonly used in food-processing plants and other areas with frequent cleaning. Gears with a clamping bore have a built-in clamp that securely grips shafts without marring them. Use the included clamping screw to tighten or loosen the grip.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Module | Number of Teeth | Pitch Dia., mm | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Material | Teeth Heat Treatment | Dia., mm | Wd., mm | Clamping Screw Thread Size | Each | |
Clamping Bore with Clamping Screw | |||||||||||||
0.5 | 16 | 8 | 9 | 7 | 22 | 4 | 303 Stainless Steel | Not Hardened | 14 | 8 | M2.5 | 0000000 | 000000 |
0.5 | 18 | 9 | 10 | 7 | 22 | 4 | 303 Stainless Steel | Not Hardened | 14 | 8 | M2.5 | 0000000 | 00000 |
0.5 | 20 | 10 | 11 | 7 | 22 | 4 | 303 Stainless Steel | Not Hardened | 14 | 8 | M2.5 | 0000000 | 00000 |
0.5 | 24 | 12 | 13.5 | 7 | 22 | 5 | 303 Stainless Steel | Not Hardened | 14 | 8 | M2.5 | 0000000 | 00000 |
0.5 | 25 | 12.5 | 13.5 | 7 | 22 | 5 | 303 Stainless Steel | Not Hardened | 14 | 8 | M2.5 | 0000000 | 00000 |
0.5 | 28 | 14 | 15 | 5 | 15 | 5 | 303 Stainless Steel | Not Hardened | 14 | 10 | M2.5 | 0000000 | 00000 |
0.5 | 30 | 15 | 16 | 5 | 15 | 5 | 303 Stainless Steel | Not Hardened | 14 | 10 | M2.5 | 0000000 | 00000 |
0.5 | 32 | 16 | 17 | 5 | 15 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
0.5 | 35 | 17.5 | 18 | 5 | 15 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
0.5 | 36 | 18 | 19 | 5 | 15 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
0.5 | 40 | 20 | 21 | 5 | 15 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
0.5 | 45 | 22.5 | 23 | 5 | 15 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
0.5 | 48 | 24 | 25 | 5 | 15 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
0.5 | 50 | 25 | 26 | 5 | 15 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
0.5 | 60 | 30 | 31 | 5 | 15 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
0.5 | 64 | 32 | 33 | 5 | 15 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
0.5 | 70 | 35 | 36 | 5 | 15 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
0.5 | 80 | 40 | 41 | 5 | 19 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 00000 |
0.5 | 90 | 45 | 46 | 5 | 19 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
0.5 | 100 | 50 | 51 | 5 | 19 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
0.5 | 120 | 60 | 61 | 5 | 19 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
1 | 14 | 14 | 16 | 8 | 25 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 15 | 15 | 17 | 8 | 25 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 16 | 16 | 18 | 8 | 25 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 18 | 18 | 20 | 6 | 16 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 20 | 20 | 22 | 6 | 16 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 24 | 24 | 26 | 6 | 16 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 25 | 25 | 27 | 6 | 16 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 28 | 28 | 30 | 6 | 16 | 6 | 303 Stainless Steel | Not Hardened | 17 | 10 | M3 | 0000000 | 00000 |
1 | 30 | 30 | 32 | 6 | 16 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
1 | 32 | 32 | 34 | 6 | 16 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
1 | 35 | 35 | 37 | 6 | 16 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
1 | 36 | 36 | 38 | 6 | 16 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
1 | 40 | 40 | 42 | 6 | 16 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 00000 |
1 | 45 | 45 | 47 | 6 | 16 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 000000 |
1 | 48 | 48 | 50 | 6 | 16 | 8 | 303 Stainless Steel | Not Hardened | 19 | 10 | M3 | 0000000 | 000000 |
1 | 50 | 50 | 52 | 6 | 20 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
1 | 60 | 60 | 62 | 6 | 20 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
1 | 64 | 64 | 66 | 6 | 20 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
1 | 70 | 70 | 72 | 6 | 20 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
1 | 80 | 80 | 82 | 6 | 20 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
1 | 90 | 90 | 92 | 6 | 20 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
1 | 100 | 100 | 102 | 6 | 20 | 10 | 303 Stainless Steel | Not Hardened | 24 | 14 | M4 | 0000000 | 000000 |
The current industry standard, these 20° pressure angle gears have thicker, stronger teeth than 14½° pressure angle gears. Made of plastic, they run quieter than metal gears and have good corrosion and chemical resistance. They’re also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch/module.
Acetal gears are best suited for use in light duty machines or for prototyping. Gears with a clamping bore secure to shafts with a clamping screw. They’re easily removed or adjusted without marring your shaft.
For technical drawings and 3-D models, click on a part number.
Hub | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Module | Number of Teeth | Pitch Dia., mm | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Material | Fabrication | Color | Dia., mm | Wd., mm | Clamping Screw Thread Size | Each | |
Clamping Bore | ||||||||||||||
0.5 | 36 | 18 | 19 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 000000 |
0.5 | 40 | 20 | 21 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 45 | 22.5 | 23.5 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 48 | 24 | 25 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 50 | 25 | 26 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 60 | 30 | 31 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 64 | 32 | 33 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 70 | 35 | 36 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 80 | 40 | 41 | 5 | 13.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
0.5 | 90 | 45 | 46 | 5 | 15 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
0.5 | 100 | 50 | 51 | 5 | 15 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
0.5 | 120 | 60 | 61 | 5 | 15 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 20 | 20 | 22 | 6 | 14.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
1 | 24 | 24 | 26 | 6 | 14.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
1 | 25 | 25 | 27 | 6 | 14.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
1 | 28 | 28 | 30 | 6 | 14.5 | 5 | Acetal Plastic | Molded | White | 14 | 8.5 | M2.5 | 00000000 | 00000 |
1 | 30 | 30 | 32 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 32 | 32 | 34 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 35 | 35 | 37 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 36 | 36 | 38 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 40 | 40 | 42 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 45 | 45 | 47 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 48 | 48 | 50 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 50 | 50 | 52 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 60 | 60 | 62 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 64 | 64 | 66 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 00000 |
1 | 70 | 70 | 72 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 000000 |
1 | 80 | 80 | 82 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 000000 |
1 | 90 | 90 | 92 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 000000 |
1 | 100 | 100 | 102 | 6 | 16 | 8 | Acetal Plastic | Molded | White | 19 | 10 | M3 | 00000000 | 000000 |