Sprockets for 14mm Shaft Diameter

Designed to meet ISO 606 and DIN 8187 international dimensional standards, these sprockets are for use with compatible ISO and DIN roller chain. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.

For technical drawings and 3-D models, click on a part number.

For DIN, ISO 06B Roller Chain (9.53 mm Pitch)
Number of Teeth	For Shaft Dia., mm	For Max. Shaft Dia., mm	OD, mm	Overall Wd., mm	Hub Dia., mm	Material	Specifications Met		Each
32	14	40	102.73	30	65	Steel	DIN 8187, ISO 606	00000000	000000
35	14	40	111.82	30	65	Steel	DIN 8187, ISO 606	00000000	00000
For DIN, ISO 08B Roller Chain (12.7 mm Pitch)
24	14	53	103.6	28	82	Steel	DIN 8187, ISO 606	00000000	00000
25	14	53	108.2	28	82	Steel	DIN 8187, ISO 606	0000000	00000

Machinable-Bore Corrosion-Resistant Sprockets for Metric Roller Chain

Machine the center of these sprockets to fit the exact dimensions of your shaft. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. The teeth are sized to fit into metric ISO roller chain. Made from stainless steel, they won’t corrode from humidity or frequent washdowns. The extended hub makes these sprockets more stable and more durable than sprockets with flat hubs. They meet ISO 606 (formerly DIN 8187), which is an international standard for dimensions and materials.

For technical drawings and 3-D models, click on a part number.

For ISO 08B Roller Chain (12.7 mm Pitch)
Number of Teeth	For Shaft Dia., mm	For Max. Shaft Dia., mm	OD, mm	Overall Wd., mm	Hub Dia., mm	Material	Specifications Met		Each
24	14	53	104.66	28	82	Stainless Steel	DIN 8187, ISO 606	0000000	0000000
25	14	53	108.7	28	82	Stainless Steel	DIN 8187, ISO 606	0000000	000000

Flat Sprockets for Metric Roller Chain

With metric teeth and slim profile, these sprockets allow your ISO roller chain to reach narrow spaces. They're commonly referred to as A-plate sprockets. Machine the unfinished bore to fit your shaft—sprockets come machined to the shaft diameter listed and are machinable up to the maximum shaft diameter size. Sprockets meet DIN 8187 and ISO 606, international standards for sprockets and roller chains.

For technical drawings and 3-D models, click on a part number.

For ISO 06B Roller Chain (9.525 mm Pitch)
Number of Teeth	For Shaft Dia., mm	For Max. Shaft Dia., mm	OD, mm	Overall Wd., mm	Material	Specifications Met		Each
38	14	106	120.4	6	Steel	DIN 8187, ISO 606	00000000	000000
40	14	112	126.49	6	Steel	DIN 8187, ISO 606	00000000	00000
42	14	118	132.59	6	Steel	DIN 8187, ISO 606	00000000	00000
45	14	127	141.73	6	Steel	DIN 8187, ISO 606	00000000	00000
48	14	136	150.88	6	Steel	DIN 8187, ISO 606	00000000	00000
54	14	154	168.91	6	Steel	DIN 8187, ISO 606	00000000	00000
For ISO 12B Roller Chain (19.05 mm Pitch)
11	14	47	77.98	12	Steel	DIN 8187, ISO 606	00000000	00000
12	14	54	83.82	12	Steel	DIN 8187, ISO 606	00000000	00000
13	14	60	89.92	12	Steel	DIN 8187, ISO 606	00000000	00000
14	14	66	96.01	12	Steel	DIN 8187, ISO 606	00000000	00000
15	14	72	101.85	12	Steel	DIN 8187, ISO 606	00000000	00000
16	14	78	107.95	12	Steel	DIN 8187, ISO 606	00000000	00000
17	14	84	114.05	12	Steel	DIN 8187, ISO 606	00000000	00000
18	14	91	119.89	12	Steel	DIN 8187, ISO 606	00000000	00000
19	14	97	125.98	12	Steel	DIN 8187, ISO 606	00000000	00000
20	14	103	132.08	12	Steel	DIN 8187, ISO 606	00000000	00000
For ISO 16B Roller Chain (25.4 mm Pitch)
11	14	64	101.85	17	Steel	DIN 8187, ISO 606	00000000	00000
12	14	72	109.98	17	Steel	DIN 8187, ISO 606	00000000	00000
13	14	80	118.36	17	Steel	DIN 8187, ISO 606	00000000	00000
14	14	89	126.49	17	Steel	DIN 8187, ISO 606	00000000	00000
15	14	97	134.62	17	Steel	DIN 8187, ISO 606	00000000	00000
16	14	105	143	17	Steel	DIN 8187, ISO 606	00000000	00000
17	14	113	151.13	17	Steel	DIN 8187, ISO 606	00000000	00000

Sprockets for Double-Strand Metric Roller Chain

The double row of teeth on these sprockets are designed to fit into metric ISO double-strand roller chain. They have an unfinished bore that’s machined to the shaft diameter size listed. Machine them to fit any shaft up to the maximum shaft diameter size. The extended hub makes these sprockets more stable and more durable than flat sprockets. They meet ISO 606 (formerly DIN 8187), which is an international standard for sprocket and roller chain dimensions and materials.

For technical drawings and 3-D models, click on a part number.

For ISO 08B Roller Chain (12.7 mm Pitch)
Number of Teeth	For Shaft Dia., mm	For Max. Shaft Dia., mm	OD, mm	Overall Wd., mm	Hub Dia., mm	Material	Specifications Met		Each
16	14	33	72.46	35	50	Steel	DIN 8187, ISO 606	0000000	000000
17	14	36	76.48	35	54	Steel	DIN 8187, ISO 606	00000000	00000
18	14	38	80.5	35	58	Steel	DIN 8187, ISO 606	00000000	00000
19	14	40	84.53	35	62	Steel	DIN 8187, ISO 606	00000000	00000
20	14	40	88.55	35	66	Steel	DIN 8187, ISO 606	00000000	000000
For ISO 10B Roller Chain (15.88 mm Pitch)
11	14	24	66.03	40	37	Steel	DIN 8187, ISO 606	00000000	000000
12	14	28	71.02	40	43	Steel	DIN 8187, ISO 606	00000000	000000
13	14	33	76.02	40	48	Steel	DIN 8187, ISO 606	00000000	000000
14	14	35	81.03	40	53	Steel	DIN 8187, ISO 606	00000000	000000
15	14	38	86.04	40	58	Steel	DIN 8187, ISO 606	00000000	000000

Taper-Lock Bushings

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing style. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.

For technical drawings and 3-D models, click on a part number.

		Keyway
For Shaft Dia.	Overall Wd.	Wd.	Dp.	Taper	Fastener Tightening Torque, in.-lbs.	Material	Includes		Each
1008 Style Bushing
14mm	22mm	5mm	2.3mm	8°	55	Steel	Set Screws	000000000	000000
1108 Style Bushing
14mm	22mm	5mm	2.3mm	8°	55	Steel	Set Screws	000000000	00000
1210 Style Bushing
14mm	25mm	5mm	2.3mm	8°	175	Steel	Set Screws	000000000	00000
1215 Style Bushing
14mm	38mm	5mm	2.3mm	8°	175	Steel	Set Screws	000000000	00000
1610 Style Bushing
14mm	25mm	5mm	2.3mm	8°	175	Steel	Set Screws	000000000	00000
1615 Style Bushing
14mm	38mm	5mm	2.3mm	8°	175	Steel	Set Screws	000000000	00000

Split-Tapered Bushings

Steel and Cast Iron

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They're for use with split-tapered sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.

Bushings with a machine key fit into a matching keyway on a sprocket or pulley for high-torque applications.

		Keyway
For Shaft Dia.	Overall Wd.	Wd.	Dp.	Taper	Fastener Tightening Torque, in.-lbs.		Each
Steel
H Style Bushing
14mm	1 1/4"	5mm	2mm	3°	95	00000000	000000
Cast Iron
P1 Style Bushing with Machine Key
14mm	1 15/16"	5mm	2mm	3°	192	00000000	00000

Self-Centering Screw-Clamp Bushings

A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket. They are also good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.

For Shaft Dia.	OD	Overall Wd.	Max. Torque, in.-lbs.	Fastener Tightening Torque, in.-lbs.	Material	Includes		Each
14mm	28mm	24mm	640	42	Steel	Clamping Screws	0000000	000000

Quick-Grip Screw-Clamp Bushings

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed. As you tighten the collar nut, the inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.

For technical drawings and 3-D models, click on a part number.

Steel
For Shaft Dia.	OD	Overall Wd.	Max. Torque, in.-lbs.		Each
14mm	26mm	29mm	1,050	0000000	000000

L Series Corrosion-Resistant Timing Belt Pulleys

Pulleys are anodized aluminum, which is more corrosion resistant than steel. All are L series (light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.

Press-Fit Mount with Set Screw

For 12 mm Max. Belt Wd.
OD	Number of Teeth	Pitch	For Shaft Dia.	Bore Type	Inside Wd.	Outside Wd.	Overall Wd.	Pitch Dia.	Number of Flanges	Fabrication	Material	Hub Dia.		Each
53.98mm	16	9.53mm	14mm	Finished	13.97mm	18.26mm	31.75mm	48.51mm	2	Machined	Anodized Aluminum	34.92mm	0000000	000000
57.15mm	17	9.53mm	14mm	Finished	13.97mm	18.26mm	31.75mm	51.53mm	2	Machined	Anodized Aluminum	38.1mm	0000000	00000
60.33mm	18	9.53mm	14mm	Finished	13.97mm	18.26mm	31.75mm	54.58mm	2	Machined	Anodized Aluminum	41.27mm	0000000	00000
63.5mm	19	9.53mm	14mm	Finished	13.97mm	18.26mm	33.32mm	57.6mm	2	Machined	Anodized Aluminum	42.87mm	0000000	00000
66.68mm	20	9.53mm	14mm	Finished	13.97mm	18.26mm	33.32mm	60.62mm	2	Machined	Anodized Aluminum	46.02mm	0000000	00000
73.03mm	22	9.53mm	14mm	Finished	13.97mm	18.26mm	34.92mm	66.7mm	2	Machined	Anodized Aluminum	53.97mm	0000000	00000
78.59mm	24	9.53mm	14mm	Finished	13.97mm	18.26mm	34.92mm	72.77mm	2	Machined	Anodized Aluminum	57.15mm	0000000	00000
84.58mm	26	9.53mm	14mm	Finished	14.73mm	18.26mm	34.92mm	78.84mm	2	Machined	Anodized Aluminum	57.15mm	0000000	00000
90.58mm	28	9.53mm	14mm	Finished	14.73mm	19.05mm	34.92mm	84.88mm	2	Machined	Anodized Aluminum	57.15mm	0000000	00000
96.52mm	30	9.53mm	14mm	Finished	14.73mm	19.05mm	34.92mm	90.95mm	2	Machined	Anodized Aluminum	57.15mm	0000000	00000
102.72mm	32	9.53mm	14mm	Finished	14.73mm	19.05mm	34.92mm	97.02mm	2	Machined	Anodized Aluminum	66.67mm	0000000	000000
114.81mm	36	9.53mm	14mm	Finished	14.73mm	19.05mm	34.92mm	109.14mm	2	Machined	Anodized Aluminum	88.9mm	0000000	000000
127mm	40	9.53mm	14mm	Finished	14.73mm	19.05mm	34.92mm	121.28mm	2	Machined	Anodized Aluminum	92.07mm	0000000	000000

Metal Miter Gears

Gears Sold Separately

With Round Bore

With straight, conically shaped teeth and a 1:1 speed ratio, miter gears connect two shafts at an angle without changing shaft speed or torque. They're more efficient than spiral miter gears because they create less friction.

For two gears to mesh correctly, they must have the same pressure angle, shaft angle, pitch/module, and number of teeth.

Carbon steel gears have hard, strong, and wear-resistant teeth. They’re best for heavy duty and high-torque applications, such as lifting equipment. However, these gears will rust when exposed to moisture or corrosive chemicals. Some gears have hardened teeth for additional wear resistance; gears with teeth that are not hardened can be hardened to fit your application.

For technical drawings and 3-D models, click on a part number.

Metric Gears

For 45° Shaft Angle

For 60° Shaft Angle

For 120° Shaft Angle

											Hub
Module	Number of Teeth	For Shaft Angle	Pressure Angle	Gear Pitch Dia., mm	OD, mm	Face Wd., mm	Overall Wd., mm	For Shaft Dia., mm	Mounting Distance, mm	Teeth Heat Treatment	Dia., mm	Wd., mm		Each
Round Bore—1045 Carbon Steel
2.5	20	60°	20°	50	54.3	15	30.5	14	60	Not Hardened	40	13.8	0000000	000000
2.5	20	120°	20°	50	52.5	8.5	33.2	14	42	Not Hardened	42	20.6	0000000	00000
3	20	45°	20°	60	65.5	22	38.7	14	90	Not Hardened	50	15.5	0000000	00000

Plastic Miter Gears

Gears Sold Separately

Connect two shafts at a right angle without changing shaft speed or torque. Made of plastic, these gears run quieter than metal gears and have good corrosion and chemical resistance.

For two gears to mesh correctly, they must have the same pressure angle, pitch/module, and number of teeth.

Nylon gears are self-lubricating, so they’re often used in food machinery. However, they’re not approved for direct contact with food or chemicals that will come into contact with food.

For technical drawings and 3-D models, click on a part number.

Metric Gears

												Hub
Module	Number of Teeth	Pressure Angle	Gear Pitch Dia.	OD, mm	Face Wd., mm	Overall Wd., mm	For Shaft Dia., mm	Mounting Distance, mm	Material	Fabrication	Color	Dia., mm	Wd., mm		Each
Round Bore
2.5	25	20°	32.5mm	66	15	30	14	50	Nylon Plastic	Molded	Blue	50	12.5	00000000	000000
3	20	20°	60mm	64.2	15	40	14	58	Nylon Plastic	Molded	Blue	50	23	00000000	00000