About Roller Chain and Sprockets
More
Sprockets for ANSI Roller Chain
Mount these sprockets onto your shaft and secure with a set screw—no machining necessary.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Teeth | For Shaft Dia. | OD | Overall Wd. | Hub Dia. | Wd. | Dp. | Material | Includes | Each | |
| 16 | 2 15/16" | 7.03" | 1 3/4" | 4 1/2" | 3/4" | 3/8" | Steel | Two Set Screws | 00000000 | 0000000 |
| 17 | 2 15/16" | 7.44" | 1 3/4" | 4 1/2" | 3/4" | 3/8" | Steel | Two Set Screws | 00000000 | 000000 |
| 18 | 2 15/16" | 7.84" | 1 3/4" | 4 1/2" | 3/4" | 3/8" | Steel | Two Set Screws | 00000000 | 000000 |
| 19 | 2 15/16" | 8.24" | 2" | 4 1/2" | 3/4" | 3/8" | Steel | Two Set Screws | 00000000 | 000000 |
| 20 | 2 15/16" | 8.64" | 2" | 4 1/2" | 3/4" | 3/8" | Steel | Two Set Screws | 00000000 | 000000 |
Quick-Disconnect (QD) Bushings
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Overall Wd. | Wd. | Dp. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
Clamp On | ||||||||
SF Style Bushing | ||||||||
| 2 15/16" | 2 1/16" | 3/4" | 1/32" | 360 | Cast Iron | Clamping Screws, Machine Key | 00000000 | 000000 |
Taper-Lock Bushings
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing style. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Hub-Mount Screw-Clamp Bushings
Transfer torque directly from a shaft to a hub. These bushings install over your hub to mount a sprocket, pulley, or gear to a shaft at the same time. Common in industrial gearbox applications, they can also connect a hollow shaft over a solid shaft. As screw-clamp bushings, they're good for shock loads. When you tighten the included clamping screws, the outer rings compress against a sprocket, pulley, or gear in between them, causing the inner rings to tighten around the shaft.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | OD | Overall Wd. | Max. Torque, in.-lbs. | Fastener Tightening Torque, in.-lbs. | Material | Each | |
| 2 15/16" | 5 7/16" | 1 7/16" | 33,500 | 260 | Zinc-Plated Steel | 0000000 | 0000000 |