About Roller Chain and Sprockets
More
Sprockets for Metric Roller Chain
Designed to meet ISO 606 and DIN 8187 international dimensional standards, these sprockets are for use with compatible ISO and DIN roller chain. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
| Number of Teeth | For Shaft Dia., mm | For Max. Shaft Dia., mm | OD, mm | Overall Wd., mm | Hub Dia., mm | Material | Specifications Met | Each | |
For ISO 04B Roller Chain (6 mm Pitch) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 10 | 6 | 8 | 21.7 | 10 | 13 | Steel | DIN 8187, ISO 606 | 0000000 | 000000 |
| 11 | 6 | 8 | 23.6 | 10 | 14 | Steel | DIN 8187, ISO 606 | 0000000 | 00000 |
| 12 | 6 | 11 | 25.8 | 10 | 16 | Steel | DIN 8187, ISO 606 | 0000000 | 00000 |
| 14 | 6 | 12 | 29.4 | 10 | 20 | Steel | DIN 8187, ISO 606 | 0000000 | 00000 |
| 15 | 6 | 12 | 31.3 | 10 | 20 | Steel | DIN 8187, ISO 606 | 0000000 | 00000 |
For ISO 05B Roller Chain (8 mm Pitch) | |||||||||
| 8 | 6 | 8 | 24 | 12 | 13 | Steel | DIN 8187, ISO 606 | 0000000 | 00000 |
| 9 | 6 | 8 | 26.6 | 12 | 15 | Steel | DIN 8187, ISO 606 | 0000000 | 00000 |
Hex Flanged Eccentric Bushings
Often used with V-groove wheels or track roller carriages, these off-center bushings create precise mounting clearance. As you turn the bushing’s hex flange with a wrench, it adjusts the distance between the V-groove wheel or carriage and the rail. Tighten the axle bolt in place once you’ve adjusted them. Made of 303 stainless steel, these bushings have very good corrosion resistance.
| For Hole Diameter | Overall Width | Flange Height | Hex Size | Material | Each | |
| 9.53mm | 17mm | 7mm | 14mm | 303 Stainless Steel | 00000000 | 000000 |
Quick-Grip Screw-Clamp Bushings
Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed. As you tighten the collar nut, the inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.
| For Shaft Dia. | OD | Overall Wd. | Max. Torque, in.-lbs. | Each | |
Steel | |||||
|---|---|---|---|---|---|
| 6mm | 16mm | 19mm | 180 | 0000000 | 000000 |