About Roller Chain and Sprockets
More
Sprockets for Double-Strand ANSI Roller Chain
These sprockets come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. All have hardened teeth for increased wear resistance and a long service life.
| Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 60-2 Roller Chain (3/4" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 11 | 1" | 1 1/4" | 3" | 2 1/8" | 1 13/16" | Steel | 0000000 | 000000 |
| 12 | 1" | 1 7/16" | 3.25" | 2 1/8" | 2 1/8" | Steel | 0000000 | 000000 |
| 13 | 1" | 1 1/2" | 3.49" | 2 1/8" | 2 1/4" | Steel | 0000000 | 000000 |
| 14 | 1" | 1 3/4" | 3.74" | 2 1/8" | 2 1/2" | Steel | 0000000 | 000000 |
| 15 | 1" | 1 7/8" | 3.98" | 2 1/8" | 2 13/16" | Steel | 0000000 | 000000 |
| 16 | 1" | 2" | 4.22" | 2 1/8" | 3" | Steel | 0000000 | 000000 |
| 17 | 1" | 2 1/4" | 4.46" | 2 1/8" | 3 1/4" | Steel | 0000000 | 000000 |
| 18 | 1" | 2 3/8" | 4.7" | 2 1/8" | 3 1/2" | Steel | 0000000 | 000000 |
| 19 | 1" | 2 1/2" | 4.95" | 2 1/8" | 3 11/16" | Steel | 0000000 | 000000 |
| 20 | 1" | 2 1/2" | 5.19" | 2 1/8" | 3 3/4" | Steel | 0000000 | 000000 |
Idler Sprockets for Double-Strand ANSI Roller Chain
Maintain constant tension on your drive with these sprockets that press against your chain to take up slack and reduce wear and vibration. They rotate freely on built-in bearings and are for use with roller chain tensioners. Bearings are double sealed to keep dirt out.
Taper-Lock Bushing-Bore Sprockets for Double-Strand ANSI Roller Chain
Switch out the bushing to install these sprockets on shafts with different diameters—no machining necessary. They have two rows of teeth for use with double-strand ANSI roller chain. Choose a taper-lock bushing that matches your shaft’s diameter. The bushing fits flush inside the sprocket hub for a thin profile.
Sprockets with hardened teeth have increased wear resistance for a long service life.
| Number of Teeth | For Bushing Style | OD | Overall Wd. | Hub Dia. | Teeth Heat Treatment | Material | Each | |
For ANSI 60-2 Roller Chain (3/4" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 13 | 1215 | 3.493" | 1 1/2" | 2 1/4" | Hardened | Steel | 0000000 | 0000000 |
| 14 | 1215 | 3.736" | 1 1/2" | 2 1/2" | Hardened | Steel | 0000000 | 000000 |
| 15 | 1615 | 3.979" | 1 1/2" | 2 13/16" | Hardened | Steel | 0000000 | 000000 |
| 16 | 1615 | 4.221" | 1 1/2" | 3" | Hardened | Steel | 0000000 | 000000 |
| 17 | 1615 | 4.462" | 1 1/2" | 3 1/4" | Hardened | Steel | 0000000 | 000000 |
| 18 | 2012 | 4.704" | 1 1/4" | __ | Hardened | Steel | 0000000 | 000000 |
| 19 | 2012 | 4.945" | 1 1/4" | __ | Hardened | Steel | 0000000 | 000000 |
| 20 | 2517 | 5.185" | 1 3/4" | 3 15/16" | Hardened | Steel | 0000000 | 000000 |
| 21 | 2517 | 5.426" | 1 3/4" | 4 3/16" | Hardened | Steel | 0000000 | 000000 |
| 25 | 2517 | 6.387" | 1 3/4" | 5 5/32" | Hardened | Steel | 0000000 | 000000 |
| 30 | 2517 | 7.586" | 1 3/4" | 6 11/32" | Not Hardened | Steel | 0000000 | 000000 |
| 36 | 2517 | 9.022" | 1 3/4" | 4 1/4" | Not Hardened | Steel | 0000000 | 000000 |
ANSI Roller Chain and Links
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding links are also known as roller links. They require two connecting links to join chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they join chain that requires an odd number of links. For trade number 35 and up, the side plate is easy to remove for attaching them to chain.
 Chain |  Connecting Link |  Adding Link |
 Adding-and-Connecting Link |  |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 1-20, 50, 100 | 00000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 00000000 | 000000 |
Corrosion-Resistant ANSI Roller Chain and Links
This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they can join chain that requires an odd number of links. For trade number 35 and up, the side plate is easy to remove for attaching them to chain.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
304 Stainless Steel  | |||||||
|---|---|---|---|---|---|---|---|
| 60-2SS | 3/4" | 0.469" | 1/2" | 460 | 1-10, 20 | 000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
304 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
| 60-2SS | 3/4" | 0.469" | 1/2" | 460 | 0000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
304 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
| 60-2SS | 3/4" | 0.469" | 1/2" | 460 | 0000000 | 000000 |
High-Strength Corrosion-Resistant ANSI Roller Chain and Links
This treated steel chain has over eight times the capacity of stainless steel chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. Per Ft. | |
Corrosion-Resistant-Coated Steel | |||||||
|---|---|---|---|---|---|---|---|
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 1-10, 20 | 000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Corrosion-Resistant-Coated Steel | ||||||
|---|---|---|---|---|---|---|
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 0000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Corrosion-Resistant-Coated Steel | ||||||
|---|---|---|---|---|---|---|
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 0000000 | 000000 |