All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Higher deflection ratings translate to greater vibration and shock isolation.

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

Able to shoulder up to 1,500 psi per mounting point, nitrile pads can support heavy machinery.

Place pads under equipment, such as drill presses, milling machines, saws, and air-conditioning units to minimize vibration and noise transmitted to and from machinery.

Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight.

Shield surfaces from impact, reduce vibration and noise, and stabilize connection points with these packs of pads—they’re reinforced with fabric to endure extreme compression without deforming. They’re also known as bearing pads.

Made of nitrile rubber, these pads have excellent resistance to oil and solvents.

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.

A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

Commonly used for tires, conveyor belts, and chutes, SBR (styrene butadiene rubber) is harder and offers better abrasion resistance than natural rubber.

With one layer of polyester fabric for every 1/16” of thickness, these sheets and strips maintain their size and shape under heavy compression better than the nonreinforced abrasion-resistant SBR.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

Made of FDA-listed materials, these sheets and strips are for use with food.

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.

With equal chemical resistance to Viton® fluoroelastomer, Aflas provides a stronger, steam-tolerant alternative.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.

When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.

Also known as Ethafoam.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

The original mouse pad material. These natural foam rubber sheets have a crisscross-textured skin on one side for a nonslip gripping surface and a layer of polyester fabric on the other side that allows objects to smoothly slide across it.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Silicone maintains its flexibility across a wide range of temperatures.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Made of Epichlorohydrin, an alternative to Buna-N, these foam sheets have excellent resistance to oil.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.