For Use On For Use On |
---|
File Type File Type |
---|
![]() | ![]() |
Standard | Abrasive Grit |
Individual/Set Individual/Set |
---|
|
For Finish For Finish |
---|
|
|
Flexibility Flexibility |
---|
|
Face Tooth Style Face Tooth Style |
---|
|
Container Type Container Type |
---|
|
Grit Grit |
---|
|
|
Files, also known as American-pattern and machinists' files, are used to remove material quickly.
Precision files, also known as Swiss-pattern files, are made to exacting measurements to ensure smoothness and are useful for finishing delicate and intricate parts.
More
File slots, keyways, grooves, and corners with these four-sided tools. They have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
For Coarse Finish | For Medium Finish | For Fine Finish | ||||||
---|---|---|---|---|---|---|---|---|
Lg. | Wd. | For Use On | Each | Each | Each | |||
Double-Cut Faces | ||||||||
4" | 1/8" | Steel, Iron | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
6" | 1/4" | Steel, Iron | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 |
8" | 5/16" | Steel, Iron | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
10" | 3/8" | Steel, Iron | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
12" | 1/2" | Steel, Iron | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
14" | 5/8" | Steel, Iron | 0000000 | 00000 | 000000 | 00 | 0000000 | 00000 |
![]() | ![]() Double-Cut Tapered Round | ![]() Half Round |
![]() Half Round with Double-Cut Faces | ![]() Tapered Rectangular with Single-Cut Faces | |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—8" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—8" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—8" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—8" Lg. One Fine-Finish Tapered Rectangular File with Rapid-Cut Faces—8" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
![]() | ![]() Half Round with Double-Cut Faces | ![]() Tapered Rectangular with Double-Cut Faces |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces | |
![]() Thin-Tapered Rectangular with Double-Cut Faces | ![]() Thin-Tapered Triangular with Single-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
![]() | ![]() Rectangular with Double-Cut Faces | ![]() Tapered Half Round with Double-Cut Faces |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces | |
![]() Tapered Triangular with Double-Cut Faces | ![]() Thin-Tapered Rectangular with Double-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Medium-Finish Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Metal Case | Steel, Iron | 0000000 | 000000 |
![]() | ![]() Half Round with Double-Cut Faces | ![]() Tapered Rectangular with Double-Cut Faces |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces | |
![]() Thin-Tapered Rectangular with Double-Cut Faces | ![]() Thin-Tapered Triangular with Single-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
![]() | ![]() Half Round with Double-Cut Faces | ![]() Rasp |
![]() Tapered Rectangular with Double-Cut Faces | ![]() Tapered Rectangular with Single-Cut Faces | |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces | ![]() Thin-Tapered Triangular with Single-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—7" Lg. One 10" Lg. Rasp One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
![]() | ![]() Half Round with Double-Cut Faces | ![]() Rasp |
![]() Tapered Rectangular with Double-Cut Faces | ![]() Tapered Rectangular with Single-Cut Faces | |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces | ![]() Thin-Tapered Triangular with Single-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—7" Lg. One 10" Lg. Rasp One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
Includes | Container Type | For Use On | Each | |
One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Coarse-Finish Knife File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Medium-Finish Half-Round File with Double-Cut Faces—10" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Medium-Finish Knife File with Double-Cut Faces—6" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 00000000 | 0000000 |
![]() | ![]() Half Round with Double-Cut Faces | ![]() Rectangular with One Double-Cut Face and One Single-Cut Face |
![]() Tapered Rectangular with Double-Cut Faces | ![]() Tapered Rectangular with Single-Cut Faces | |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces | ![]() Tapered Triangular with Double-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Coarse-Finish Rectangular File with One Double-Cut Face and One Single-Cut Face—10" Lg. One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File (For Use Only On Aluminum) with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—8" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—10" Lg. One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
![]() | ![]() Half Round with Double-Cut Faces | ![]() Rectangular with One Double-Cut Face and One Single-Cut Face |
![]() Tapered Rectangular with Double-Cut Faces | ![]() Tapered Rectangular with Single-Cut Faces | |
![]() Tapered Round with Double-Cut Face | ![]() Tapered Square with Double-Cut Faces | ![]() Tapered Triangular with Double-Cut Faces |
Includes | Container Type | For Use On | Each | |
One Coarse-Finish Rectangular File with One Double-Cut Face and One Single-Cut Face—10" Lg. One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File (For Use Only On Aluminum) with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—8" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—10" Lg. One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
File slots, keyways, grooves, and corners with little to no clogging. These corrosion-resistant files have two sets of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
File slots, keyways, grooves, and corners. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.
Diamond Surface Lg. | Lg. | Wd. | For Use On | Each | |
For Coarse Finish (80-100 Grit) | |||||
---|---|---|---|---|---|
Straight | |||||
1.5" | 6" | 1/8" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
Tapered | |||||
4.328" | 8 5/8" | 0.24" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
For Medium Finish (120-140 Grit) | |||||
Straight | |||||
1.5" | 6" | 1/8" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Tapered | |||||
4.328" | 8 5/8" | 0.24" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
For Fine Finish (170-200 Grit) | |||||
Straight | |||||
1.5" | 6" | 1/8" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Tapered | |||||
4.328" | 8 5/8" | 0.24" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 00000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 00000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 00000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
These files are for frequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 000000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
6 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
![]() | ![]() | ![]() Barrette | ![]() Half Round |
![]() Rectangular | ![]() Round | ![]() Square | |
![]() Triangular |
Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Finish No. | Includes | For Use On | Each | |
6-Piece Sets | ||||
---|---|---|---|---|
2 | One Fine-Finish Tapered Rectangular File with Single-Cut Faces—6 1/4" Lg. × 7/32" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Single-Cut Face—6 1/4" Lg. × 1/8" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 1/8" Wd. One Fine-Finish Tapered Square File with Single-Cut Faces—6 1/4" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 1/16" Thick. | Steel, Iron | 0000000 | 0000000 |
The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Square files are good for slots, keyways, grooves, and corners.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Lg. | Wd. | Face Tooth Style | For Use On | Each | |
For Medium Finish (No. 0) | |||||
---|---|---|---|---|---|
Tapered Square | |||||
6 1/4" | 0.094" | Double Cut × Double Cut | Steel, Iron | 0000000 | 000000 |
For Fine Finish (No. 2) | |||||
Tapered Square | |||||
6 1/4" | 0.094" | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
For Extra Fine Finish (No. 4) | |||||
Tapered Square | |||||
6 1/4" | 0.094" | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. Files have one set of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Square files are good for slots, keyways, grooves, and corners.
For Fine Finish (No. 2) | |||||
---|---|---|---|---|---|
Lg. | Wd. | Face Tooth Style | For Use On | Each | |
Square | |||||
6 1/4" | 7/64" | Single Cut | Steel, Iron | 0000000 | 000000 |
Second only to diamond in hardness, these files last 100 times longer than standard files. The small tip allows precise work in tight spots.
Square files are good for slots, keyways, grooves, and corners.
For Extra Fine Finish (280 Grit) | |||||
---|---|---|---|---|---|
Lg. | Wd. | Thick. | For Use On | Each | |
Square | |||||
5 1/2" | 0.128" | 0.128" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
7 1/8" | 0.197" | 0.197" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.
Files with 1.563" diamond surface length are also known as escapement files.
Square files are good for slots, keyways, grooves, and corners.
Diamond Surface Lg. | Lg. | Wd. | For Use On | Each | |
For Coarse Finish (80-100 Grit) | |||||
---|---|---|---|---|---|
Tapered Square | |||||
1.563" | 5 1/2" | 0.079" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
For Medium Finish (120-140 Grit) | |||||
Tapered Square | |||||
1.563" | 5 1/2" | 0.079" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
For Fine Finish (170-200 Grit) | |||||
Tapered Square | |||||
1.563" | 5 1/2" | 0.079" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
![]() | ![]() Straight Rectangular | ![]() Tapered Crossing | ![]() Tapered Half Round |
![]() Tapered Round | ![]() Tapered Square | ![]() Tapered Triangular |
The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tips allow precise work in tight spots.
Includes | For Use On | Each | |
One Coarse-Finish (80-100 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Coarse-Finish (80-100 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Coarse-Finish (80-100 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Coarse-Finish (80-100 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Coarse-Finish (80-100 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Coarse-Finish (80-100 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
Includes | For Use On | Each | |
One Medium-Finish (120-140 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Medium-Finish (120-140 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Medium-Finish (120-140 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Medium-Finish (120-140 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Medium-Finish (120-140 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Medium-Finish (120-140 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
Includes | For Use On | Each | |
One Fine-Finish (170-200 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Fine-Finish (170-200 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Fine-Finish (170-200 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Fine-Finish (170-200 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Fine-Finish (170-200 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Fine-Finish (170-200 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.
![]() | ![]() Knife | ![]() Rectangular | ![]() Round |
![]() Square | ![]() Triangular |
Includes | For Use On | Each | |
One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
![]() | ![]() Knife | ![]() Rectangular | ![]() Round |
![]() Square | ![]() Triangular |
Includes | For Use On | Each | |
One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |