Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Coated with an aluminum-silicon alloy, these sheets resist corrosion while withstanding long-term exposure to high temperatures. Use in drying ovens, furnaces, and smokestacks.

With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

The nickel and molybdenum content gives AR400 carbon steel the ability to resist wear better than all other carbon steel. It's often used as wear strips, liners, and deflector plates.

Even in low temperatures, A516 carbon steel resists breaking upon impact. Also known as pressure-vessel-quality (PVQ) steel, it is mostly used for boilers, storage tanks, and pressure vessels.

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Because the thickness is oversized, you can finish these bars to your exact requirements.

The thickness is oversized for finishing to your exact requirements.

4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.

Combining strength with weldability and formability, A572 alloy steel is an economical choice for structural components, such as channels, beams, and framing. It has a low carbon content, making it easy to weld with a variety of welding methods.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

Also known as flat stock, these sheets and bars are precision ground on the top and bottom.

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Designed for use as production injection molds and blow molds, QC-10 is extremely strong with a hard surface and excellent thermal conductivity.

MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.

3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.

The honeycomb design provides a higher strength-to-weight ratio than solid sheets.

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

Made of 1100-series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.

The textured surface on these sheets increases rigidity and hides fingerprints and dents.

These sheets and bars are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum.

A honeycomb core is bonded between two aluminum sheets for rigidity.

This material has tighter tolerances than standard 303 stainless steel.

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

This material has tighter tolerances than standard 304 stainless steel.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

The width and thickness are oversized for finishing to your exact requirements.

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

This material is hardened for increased wear resistance over standard 420 stainless steel.

With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.

The titanium content of 321 stainless steel preserves corrosion resistance around weld points.

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

Polished on one side to a reflective, mirror-like finish.

Polished on one side to a reflective, mirror-like finish.

A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

182 copper is stronger, harder, and more wear resistant than 110 copper. Also known as RWMA Class 2 chromium copper, it's commonly used in resistance welding, for circuit-breaker parts, and for molds to make plastic parts.

Offering excellent formability, 220 bronze is known for its ability to withstand outdoor exposure. It's commonly called commercial bronze.

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

With an oversized thickness, length, and width, these bars can be finished to your exact requirements.

The thickness, length, and width are oversized for finishing to your exact requirements.

These sheets and bars are precision ground to a tight thickness tolerance.

The thickness on these bars is precision ground to a tight tolerance.

Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.

Because Invar 36 holds its size and shape when temperatures rise, these nickel-iron alloy sheets are the go-to material when dimensional stability is required. They are commonly used when precision is a priority, such as for scientific instruments and optical devices.

These nickel-iron-cobalt alloy sheets expand at the same rate as glass when heated. They offer better machinability than Invar 36 and are often used anywhere a dependable glass-to metal seal is required, such as in diodes and microwave tubes.

A blend of nickel, chromium, and molybdenum gives these 625 nickel sheets the strength, weldability, and corrosion resistance necessary for use in expansion joints, exhaust systems, and marine components. They are comparable to Inconel 625 and Haynes 625.

With 99.9% tin content, this material is considered commercially pure. It's commonly used to make gaskets and filters.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Made of recycled UHMW plastic, these sheets and bars are an economical, environmentally friendly alternative to standard UHMW while still offering the same low-friction surface that prevents sticking and binding.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

This oil-filled material is self-lubricating for an extra-slippery surface.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Create signs and partitions with this easy to cut PVC foam.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

With glass reinforcement, this nylon 6/6 material is stronger than standard nylon, plus it can withstand higher temperatures. It’s widely used in high-stress applications, such as caster wheels and automotive parts.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.