With flat edges on all four sides, square-profile O-rings cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.

These square-profile O-rings have flat edges on all four sides, so they cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps.

Built for high-speed pump and valve applications, these super-tough seals are made of expanded-graphite yarn with carbon-yarn corners.

Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps.

These seals require lighter packing pressure than standard oil- and water-resistant packing seals, so they cause less friction and reduce shaft wear. They’re made of graphite-impregnated aramid fiber and are for use in pumps and valves.

Synthetic yarn that’s comparable in strength to aramid is combined with graphite for soft seals that dissipate heat away from the shaft to extend the life of pumps.

The Inconel-wire reinforcement in these expanded-graphite yarn seals ensures they keep their shape longer than the High-Flexibility Steam-Resistant Packing Seals. Use them for steam applications in valves.

Offering excellent flexibility, these seals are made of expanded graphite yarn. Use them for steam applications in pumps and valves.

This material is made with neoprene for resistance to refrigerants.

Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.

Also resistant to inert gases and abrasion, this material is made from blended aramid fiber/SBR rubber.

For use in high-pressure applications up to 3,000 psi.

In addition to water and oil, this pliable leather gasket material resists salts, grease, and detergents.

In addition to withstanding temperatures up to 450° F, this silicone gasket material resists water and salts.

Able to withstand pressure up to 10,000 psi, this is our highest pressure-rated gasket material. It handles temperatures up to 850° F.

Made from a blend of carbon and Buna-N rubber, this material is unaffected by oil and temperatures up to 650° F.

Our highest temperature gasket material, this is made of high-alumina ceramic and can withstand temperatures up to 2600° F.

Made from a blend of aramid fiber and Buna-N rubber.

Commonly used in low-pressure applications, cork is blended with Buna-N rubber for a flexible, oil-resistant gasket material.