Capacity per Mount Capacity per Mount |
|---|
|
Mount Type Mount Type |
|---|
 |  |
| Bolt On | Threaded Hole |
 |  |
| Screw | Threaded Stud |
Overall Height Overall Height |
|---|
|
|
|
Hardness Hardness |
|---|
Shear Capacity per Mount Shear Capacity per Mount |
|---|
|
Diameter Diameter |
|---|
|
|
|
Deflection @ Capacity Deflection @ Capacity |
|---|
|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
|
|
|
Base Length Base Length |
|---|
Base Width Base Width |
|---|
|
|
|
About Vibration-Damping Mounts
More
General Purpose Bolt-Down Vibration-Damping
Mounts with Threaded Hole
These mounts bolt to your mounting surface to keep your equipment stationary. Use them in compression load applications with rotating equipment such as fans, blowers, pumps, compressors, and generators.
Neoprene rubber has good resistance to oil and gasoline.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | ||
Black Neoprene Rubber with Steel Base | ||||||||||||||||
| 3 | 1/2"-13 | 1,500 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 000000 |
| 3 | 1/2"-13 | 1,500 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 4 | 1/2"-13 | 60 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 48A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | 100 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 56A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | 130 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 64A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | 200 | 0.2" | 1.5" | 1.53" | 4.41" | 4" | Durometer 56A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | 260 | 0.2" | 1.5" | 1.53" | 4.41" | 4" | Durometer 64A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 5 | 5/16"-18 | 45 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 30A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 00000000 | 00000 |
| 5 | 5/16"-18 | 75 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 40A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 0000000 | 00000 |
| 5 | 5/16"-18 | 125 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 50A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 00000000 | 00000 |
| 5 | 3/8"-16 | 150 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 40A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 0000000 | 00000 |
| 5 | 3/8"-16 | 380 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 60A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 0000000 | 00000 |
| 5 | 3/8"-16 | 600 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 00000000 | 00000 |
| 5 | 1/2"-13 | 600 | 0.5" | 2.75" | 2.56" | 5.5" | 3.31" | Durometer 60A | -20° to 225° | __ | No | 2 | 0.5" | 4.13" | 00000000 | 00000 |
| 5 | 1/2"-13 | 1,000 | 0.5" | 2.75" | 2.56" | 5.5" | 3.31" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 4.13" | 00000000 | 00000 |
| 5 | 1/2"-13 | 2,100 | 0.5" | 2.75" | 3.38" | 6.25" | 4" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 5" | 00000000 | 00000 |
| 5 | 1/2"-13 | 4,300 | 0.5" | 2.75" | 3.38" | 6.75" | 4.38" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 5.5" | 00000000 | 00000 |
| 6 | 5/8"-11 | 1,500 | 0.03" | 1.19" | 4" | 7" | 2.5" | Durometer 65A | 0° to 180° | __ | No | 2 | 0.66" | 5.5" | 00000000 | 00000 |
| 6 | 5/8"-11 | 3,000 | 0.03" | 1.19" | 4" | 7" | 4" | Durometer 60A | 0° to 180° | __ | No | 2 | 0.66" | 5.5" | 00000000 | 000000 |
Gray Neoprene Rubber with Steel Base | ||||||||||||||||
| 3 | 1/2"-13 | 4,000 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | 4,000 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Green Neoprene Rubber with Steel Base | ||||||||||||||||
| 3 | 1/2"-13 | 3,000 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | 3,000 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Red Neoprene Rubber with Steel Base | ||||||||||||||||
| 3 | 1/2"-13 | 2,250 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | 2,250 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Neoprene Rubber | ||||||||||||||||
| 7 | 1/4"-20 | 14 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 40A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 1/4"-20 | 24 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 50A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 1/4"-20 | 60 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 68A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 3/8"-16 | 50 | 0.01" | 1.5" | 3" | 3" | 3" | Durometer 44A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.27" | 2.5" | 00000000 | 00000 |
| 7 | 3/8"-16 | 110 | 0.01" | 1.5" | 3" | 3" | 3" | Durometer 70A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.27" | 2.5" | 00000000 | 00000 |
Adjustable Extreme-Force Bolt-Down
Vibration-Damping Mounts with Threaded Hole
Connect these mounts to your air supply for vibration and shock isolation in compression load applications. They handle the high impact of equipment such as punch presses, blowers, forging hammers, shakers, vibrators, and air compressors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. You can add or release air for leveling (±1/4" adjustment).
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Ht. | Base Lg. | Base Wd. | Hardness | Max. Pressure, psi | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Aluminum Base and Aluminum Plate | |||||||||||||||||
| 3/8"-16 | 100 | 1" | 2.5" | 2.88" | 2" | 3" | 3" | Durometer 60A | 60 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 2.38" | 00000000 | 0000000 |
| 1/2"-13 | 300 | 1" | 2.45" | 4.14" | 1.91" | 4.19" | 4.19" | Durometer 60A | 60 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 3.5" | 00000000 | 000000 |
| 1/2"-13 | 600 | 1.5" | 3.5" | 5" | 2.94" | 5.12" | 5.12" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 4.25" | 00000000 | 000000 |
| M10 | 100 | 0.5" | 2.5" | 2.89" | 1.94" | 3" | 3" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 2.38" | 00000000 | 00000 |
| M12 | 300 | 0.5" | 2.5" | 4.14" | 1.94" | 4.19" | 4.19" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 3.5" | 00000000 | 00000 |
| M12 | 550 | 0.5" | 3.5" | 5" | 2.94" | 5.13" | 5.13" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 4.25" | 00000000 | 000000 |
| M12 | 1,200 | 0.5" | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 6" | 00000000 | 000000 |
| M16 | 2,400 | 0.5" | 3.5" | 9.66" | 2.94" | 10" | 10" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 8.5" | 00000000 | 000000 |
Neoprene Rubber with Aluminum Base and Steel Plate | |||||||||||||||||
| 1/2"-13 | 1,200 | 1.5" | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 6" | 00000000 | 000000 |
| 5/8"-11 | 2,400 | 1.5" | 3.5" | 9.66" | 2.94" | 10" | 10" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 8.5" | 00000000 | 000000 |
| 5/8"-11 | 4,800 | 1.5" | 3.5" | 13.31" | 2.94" | 13.5" | 13.5" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 12" | 00000000 | 000000 |
Extreme-Force Bolt-Down Vibration-Damping
Mounts with Threaded Hole
Spring action provides significant isolation of vibration and noise. These mounts are great for high-impact applications such as punch presses and hammers and machines operating as slowly as 500 rpm. A rubber pad is bonded to the base to limit movement. Use the slots in the base to bolt down these mounts to keep your equipment stationary. Mounts are for use in compression load applications. An adjustment bolt with locking nut lets you use mounts for leveling. For best results, adjust the leveling bolt so the plate is 1/4"-1/2" above the top of the base.
For technical drawings and 3-D models, click on a part number.
Mounts | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Replacement Springs | |||||||||||||
| Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Base Lg. | Base Wd. | Temp. Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Each | Each | ||
Steel with Iron Base and Plate and Zinc-Plated Steel Stud | ||||||||||||||
| 3/8"-16 | 3" | 50 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 000000 | 0000000 | 00000 |
| 3/8"-16 | 3" | 100 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 150 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 250 | 0.83" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 370 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 520 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 675 | 1.32" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 900 | 1.02" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 1,200 | 0.9" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 1,785 | 0.88" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
Seismic Bolt-Down Vibration-Damping
Mounts with Threaded Hole
Limit damage during moderate earthquakes. These mounts have a seismic rating of 1g (acceleration of gravity) and dissipate vibration and noise in compression and shear load applications. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. Mounts come with a bolt and washer for height adjustment.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base and Cadmium-Plated Steel Bolt | ||||||||||||||||
| 1/2"-13 | 1 1/4" | 250 | 0.15" | 200 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 30A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 000000 |
| 1/2"-13 | 1 1/4" | 525 | 0.15" | 420 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 45A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 00000 |
| 1/2"-13 | 1 1/4" | 1,000 | 0.15" | 800 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 60A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 1,400 | 0.15" | 400 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 40A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 2,100 | 0.15" | 600 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 50A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 3,500 | 0.15" | 1,000 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 60A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
Oil-Resistant Vibration-Damping
Mounts with Threaded Hole
Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors. They have an aluminum plate on top to support heavy loads and displace vibration and shock through the entire mount. The bottom of the mount has hundreds of suction pockets to prevent machine walking. Mounts come with a bolt and nut for height adjustment.
For technical drawings and 3-D models, click on a part number.
| Capacity per Mount, lbs. | Thread Size | Thread Lg. | Deflection @ Capacity | O'all Ht. | Base Lg. | Base Wd. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Nitrile Rubber with Aluminum Plate and Zinc-Plated Steel Bolt | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 500 | 1/2"-20 | 1 1/2" | 0.18" | 1.188" | 4" | 4" | Durometer 60A | Medium | -25° to 250° | 0000000 | 000000 |
| 1,000 | 1/2"-20 | 1 1/2" | 0.12" | 1.188" | 6" | 6" | Durometer 60A | Medium | -25° to 250° | 0000000 | 00000 |
| 1,875 | 1/2"-20 | 1 1/2" | 0.21" | 1.188" | 4" | 4" | Durometer 80A | Hard | -25° to 250° | 0000000 | 00000 |
| 2,500 | 1/2"-20 | 1 1/2" | 0.13" | 1.188" | 6" | 6" | Durometer 80A | Hard | -25° to 250° | 0000000 | 00000 |
General Purpose Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole
The design of their natural rubber body provides uniform stress distribution, isolates vibration, and protects from occasional shock in compression load applications.
Install a washer (sold separately) to keep equipment supported if the rubber fails. Match the washer diameter with the mount's base length.
For technical drawings and 3-D models, click on a part number.
Mounts | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Optional Washers | ||||||||||||||||
| Capacity per Mount, lbs. | O'all Ht. | Dia. | Hole Dia. | Base Lg. | Base Wd. | Base Thick. | Deflection @ Capacity | Hardness | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | Each | ||
Natural Rubber with Aluminum Base | |||||||||||||||||
| 2 | 0.78" | 1" | 0.166" | 1.69" | 1.69" | 0.032" | 0.06" | Durometer 35A | 0° to 170° | No | 4 | 0.141" | 1.375" | 0000000 | 000000 | 0000000 | 00000 |
| 4 | 0.78" | 1" | 0.166" | 1.69" | 1.69" | 0.032" | 0.06" | Durometer 40A | 0° to 170° | No | 4 | 0.141" | 1.375" | 0000000 | 00000 | 0000000 | 0000 |
| 8 | 0.81" | 1" | 0.166" | 1.69" | 1.69" | 0.032" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.141" | 1.375" | 0000000 | 00000 | 0000000 | 0000 |
Natural Rubber with Steel Base | |||||||||||||||||
| 12 | 1.12" | 1.5" | 0.257" | 2.38" | 2.38" | 0.05" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.166" | 1.938" | 0000000 | 00000 | 0000000 | 0000 |
| 30 | 1.41" | 1.5" | 0.257" | 2.38" | 2.38" | 0.05" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.166" | 1.938" | 0000000 | 00000 | 0000000 | 0000 |
| 45 | 1.56" | 2" | 0.391" | 3" | 3" | 0.062" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.196" | 2.5" | 0000000 | 00000 | 0000000 | 0000 |
| 90 | 2.38" | 2" | 0.391" | 3" | 3" | 0.062" | 0.06" | Durometer 53A | 0° to 170° | No | 4 | 0.196" | 2.5" | 0000000 | 00000 | 0000000 | 0000 |
Bolt-Down Vibration-Damping Mounts
with Unthreaded Hole for Tight Spaces
Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile. The design of their natural rubber body provides uniform stress distribution, isolates vibration, and protects from occasional shock in compression load applications. Use the holes in the base to bolt down these mounts to keep your equipment stationary.
Washers (sold separately) can be installed—one on each end of the mount—to keep equipment supported if the rubber fails. Match the washer diameter with the mount's base length.
For technical drawings and 3-D models, click on a part number.
Mounts | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Optional Washers | ||||||||||||||||
| Capacity per Mount, lbs. | O'all Ht. | Dia. | Hole Dia. | Base Lg. | Base Wd. | Base Thick. | Deflection @ Capacity | Hardness | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | Each | ||
Natural Rubber with Aluminum | |||||||||||||||||
| 2 | 0.41" | 1" | 0.166" | 1.25" | 1.25" | 0.032" | 0.06" | Durometer 35A | 0° to 170° | No | 4 | 0.141" | 1" | 0000000 | 00000 | 0000000 | 00000 |
| 4 | 0.41" | 1" | 0.166" | 1.25" | 1.25" | 0.032" | 0.06" | Durometer 40A | 0° to 170° | No | 4 | 0.141" | 1" | 0000000 | 0000 | 0000000 | 0000 |
| 8 | 0.5" | 1" | 0.166" | 1.25" | 1.25" | 0.032" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.141" | 1" | 0000000 | 0000 | 0000000 | 0000 |
Natural Rubber with Steel | |||||||||||||||||
| 12 | 0.62" | 1.5" | 0.257" | 1.75" | 1.75" | 0.05" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.166" | 1.375" | 0000000 | 0000 | 0000000 | 0000 |
| 20 | 1" | 2" | 0.391" | 2.25" | 2.25" | 0.062" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.196" | 1.75" | 0000000 | 00000 | 0000000 | 0000 |
| 30 | 1.12" | 1.5" | 0.257" | 1.75" | 1.75" | 0.05" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.166" | 1.375" | 0000000 | 0000 | 0000000 | 0000 |
| 45 | 1" | 2" | 0.391" | 2.25" | 2.25" | 0.062" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.196" | 1.75" | 0000000 | 00000 | 0000000 | 0000 |
| 90 | 1.81" | 2" | 0.391" | 2.25" | 2.25" | 0.062" | 0.06" | Durometer 53A | 0° to 170° | No | 4 | 0.196" | 1.75" | 0000000 | 00000 | 0000000 | 0000 |
General Purpose Vibration-Damping
Sandwich Mounts with Studs
Use these rubber sandwich mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
Neoprene rubber has good resistance to weather and acids and moderate resistance to oils.
Natural rubber has superior resistance to tears and abrasion as well as good flexibility in cold temperatures.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Lg. | Wd. | Ht. | Thread Lg. | Hardness | Hardness Rating | Temp. Range, °F | Each | ||
Neoprene Rubber with Zinc-Plated Steel Stud | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 6-32 | 3 | 0.03" | Not Rated | Not Rated | 3/16" | 3/16" | 1/4" | 1/2" | Durometer 50A | Medium | 10° to 180° | 00000000 | 00000 |
| 3 | 10-32 | 8 | 0.05" | Not Rated | Not Rated | 3/8" | 3/8" | 1/2" | 1/2" | Durometer 50A | Medium | 10° to 180° | 00000000 | 0000 |
Natural Rubber with Zinc-Plated Steel Stud | ||||||||||||||
| 3 | 6-32 | 3 | 0.03" | Not Rated | Not Rated | 3/16" | 3/16" | 1/4" | 1/2" | Durometer 50A | Medium | -10° to 150° | 00000000 | 0000 |
| 3 | 10-32 | 8 | 0.05" | Not Rated | Not Rated | 3/8" | 3/8" | 1/2" | 1/2" | Durometer 50A | Medium | -10° to 150° | 00000000 | 0000 |