Clear All
Shape Shape | Show |
|---|
 | Rod and Disc |
Shape Shape | Hide |
|---|
 |  |
| Sheet and Bar | Rectangular Tube |
 | |
| 90° Angle | Rod and Disc |
 |  |
| Film | Honeycomb |
 |  |
| Triangle | Foil |
 |  |
| Half Round | Square |
 |  |
| Round Tube | Tee |
Material Material |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Hardness Hardness |
|---|
|
Yield Strength Yield Strength |
|---|
|
Temper Rating Temper Rating |
|---|
|
Certificate Certificate |
|---|
 | |
Melting Point Temperature Melting Point Temperature |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Surface Resistivity Surface Resistivity |
|---|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
Modulus of Elasticity Modulus of Elasticity |
|---|
|
Density Density |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Appearance Appearance |
|---|
 | Plain |
Fabrication Fabrication |
|---|
|
About Copper, Brass, and Bronze
More
Easy-to-Machine Architectural 385 Brass Rods
- Yield Strength:
Inch sizes: 16,000 psi
Metric sizes: 60,000 psi - Hardness:
Inch sizes: Rockwell B40 (Soft)
Metric sizes: Rockwell B55 (Soft) - Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B455
Metric Sizes: European Standard EN 12164
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
1 m Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Straightness Tolerance | Each | |
| 2 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 3 | -0.05 | .4 mm per 400 mm | 0000000 | 0000 |
| 4 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 5 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 6 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 8 | -0.08 | .4 mm per 400 mm | 0000000 | 00000 |
| 10 | -0.08 | .4 mm per 400 mm | 0000000 | 00000 |
| 20 | -0.08 | .4 mm per 400 mm | 0000000 | 000000 |