Biodegradable and nonflammable, these water-based degreasers cut through grease and oils without harsh chemicals.

These water-based degreasers use detergents to lift and rinse away grease and oils. They are nonflammable and give off less fumes than solvent-based degreasers.

These mild detergents contain bacteria that consume and break down grease and oil, rather than rinsing it into pipes that can clog.

Remove brake fluid, grease, and oil from brakes with these solvent-based cleaners.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls.

Clean and restore shine to stainless steel surfaces. These cleaners leave a finish that resists dirt, oil, and water spots.

These restorers remove weld scale, discoloration, black oxides, and other impurities from stainless steel (also known as pickling) while restoring the corrosion-resistant chromium layer.

Clean, polish, and protect aluminum, brass, copper, chrome, and stainless steel with this polish. It removes oxidation, tarnish, and surface rust without scratching or dulling brushed finishes.

Use these cleaners to remove dirt, grime, and stains from most surfaces.

Stronger than our standard floor cleaners, these cleaners remove even the toughest soils and grease from floors to help prevent slips and falls.

Clean rust and lime deposits such as calcium and scale from HVAC systems, coolers, tools, and vehicles.

Remove dirt, dust, and disinfectant residue from surfaces in clean rooms, including walls, floors, and stainless steel countertops. These cleaners are packaged in a clean room, sterilized, double bagged, and marked with a lot number.

Often used in freezers and cold-storage environments where other water-based cleaners would freeze, these cleaners remove dirt and grime in temperatures as low as -40° F.

For strong bonds, clean and degrease surfaces before applying adhesives.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Spray on to clean without rinsing.

Dissolve scale and mineral buildup in drinking water systems with these scale removers. They meet NSF/ANSI Standard 60 for use with components that come into contact with drinking water.

Often used on the outside of cooling towers and condensers, these scale removers cling to vertical surfaces to dissolve scale and mineral deposits.

In addition to cleaning steam and hot water boilers, these conditioners control foam and pH levels to improve boiler efficiency and reduce energy costs.

Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents.

Kill bacteria, viruses, and fungi.

Twice as concentrated as our standard disinfectant/cleaners, these cleaners are often used in laboratories and medical environments where contamination is a concern.

Less harsh than our other disinfectants, these disinfectants won't irritate sensitive skin.

Bleach disinfects almost any surface as long as discoloration is not a concern.

Quickly dissolve and remove most adhesive residue.

Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.

These adhesive removers are safe, easy to use, and virtually odorless. They evaporate slowly, allowing them to work for up to 24 hours.

These clinging gels eliminate mold stains and can be used on most surfaces, including grout, concrete, and brick.

Remove marker, pen, and ink stains from a wide range of surfaces, including metal, plastic, carpet, and tile.

Often used to clean sensitive parts and equipment in precision applications, such as electronics and medical device manufacturing, these cleaners rinse away without leaving a residue.

Remove oil and fuel spills from asphalt, soil, and other outdoor areas.

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

Clean delicate surfaces inside tubes, pipes, and holes.

The handle makes it easy to brush by hand.

These brushes withstand temperatures up to 500°.

The handle makes it easy to clean tubes, pipes, and holes by hand.

The long shaft on these brushes snakes around curves to reach deep into tubes.

Attach the shank to a handle or power tool.

Remove light to medium rust, stains, and small burs from tubes, pipes, and holes.

The handle makes it easy to brush by hand.

Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step.

Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step.

Clean the inside and outside of a tube with one brush.

Sets include an assortment of brushes for cleaning the inside and outside of tubes.

Work on delicate surfaces in tiny spaces and on very small parts.

Remove light-to-medium rust and stains and small burs.

Work in tiny spaces and on very small parts to remove light-to-medium rust and stains and small burs.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

The bristles angle inward in a V shape to get into narrow spaces.

Clean delicate surfaces in hard-to-reach spots. Use these brushes to remove light-to-medium rust and stains and small burs.

The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.

The bristles are coated with a synthetic compound that keeps them stiff and straight so they last longer than standard brushes.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step.

These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.

Use on delicate surfaces.

Two rows of bristles cover more surface area.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

The rigid, front-facing bristles are partially twisted for added cleaning power when removing debris from flat surfaces.

The bristles are partially twisted in alternating directions, which prevents them from separating.

Use on contours and angles or for reaching into cracks and corners.

Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Bristles are partially twisted in alternating directions, which prevents them from separating.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Also known as aqueous cleaning solutions, these water-based solutions are for general purpose cleaning.

These petroleum-based, ammonia-free solutions are the strongest we offer.

Unlike other solvent-based parts washing solutions, these won't leave anything behind.

Regulate the flow of washing solution with the push-button control.

These brushes have steel bristles for removing weld slag and heavy surface contamination.

Control media residue so it isn’t transferred to your parts.