Material Material |
|---|
|
For OD For OD |
|---|
|
|
|
Connection Style Connection Style |
|---|
 |
| Cam-and-Groove |
 |
| Threaded |
For Use With For Use With |
|---|
|
|
Body Material Body Material |
|---|
|
Fitting Material Fitting Material |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Compatible With Compatible With |
|---|
|
About Noise, Filtration, and Flow Ratings
More
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Cam-and-Groove Hose Couplings
for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
316 stainless steel plugs and sockets have excellent corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | Max. Pressure | Each | |
316 Stainless Steel | ||||
|---|---|---|---|---|
| 1/2 | 15/16" | 250 psi @ 72° F | 000000000 | 000000 |
| 3/4 | 1 1/4" | 250 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/4 | 1 13/16" | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 250 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 1/2" | 250 psi @ 72° F | 00000000 | 00000 |
| 2 1/2 | 3" | 200 psi @ 72° F | 00000000 | 00000 |
| 3 | 3 5/8" | 200 psi @ 72° F | 00000000 | 00000 |
| 4 | 4 3/4" | 150 psi @ 72° F | 00000000 | 000000 |
| 5 | 5 3/4" | 75 psi @ 72° F | 000000000 | 000000 |
| 6 | 6 15/16" | 75 psi @ 72° F | 00000000 | 000000 |
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Socket ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
316 Stainless Steel with 316 Stainless Steel Levers | |||||||||
| 1 | 1 7/16" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 |
| 1 1/4 | 1 13/16" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 |
| 2 | 2 1/2" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 |
| 2 1/2 | 3" | 2 | 304 Stainless Steel | 200 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 |
| 3 | 3 5/8" | 2 | 304 Stainless Steel | 200 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 |
| 4 | 4 3/4" | 2 | 304 Stainless Steel | 150 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 |
| 5 | 5 3/4" | 2 | 304 Stainless Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 |
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Socket ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
316 Stainless Steel with 316 Stainless Steel Levers | |||||||||
| 1/2 | 15/16" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 |
| 3/4 | 1 1/4" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 1 | 1 7/16" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 1 1/4 | 1 13/16" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 2 | 2 1/2" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 2 1/2 | 3" | 2 | 304 Stainless Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 3 | 3 5/8" | 2 | 304 Stainless Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 4 | 4 3/4" | 2 | 304 Stainless Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
| 5 | 5 3/4" | 2 | 304 Stainless Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 |
| 6 | 6 15/16" | 2 | 304 Stainless Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 |
Metal Round Caps
More durable than plastic caps, these provide the most protection from abrasion and impact.
Stainless steel caps have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
18-8 Stainless Steel | ||||
|---|---|---|---|---|
| For OD | For Pipe Size | Inside Ht. | Each | |
Caps | ||||
| 1" | __ | 23/32" | 00000000 | 00000 |
| 1 1/4" | __ | 3/4" | 00000000 | 0000 |
| 1 1/2" | __ | 21/32" | 00000000 | 0000 |
| 2" | __ | 1 7/32" | 00000000 | 0000 |
| 2 1/4" | __ | 1 1/16" | 00000000 | 0000 |
| 2 1/2" | __ | 1 5/16" | 00000000 | 0000 |
| 2 3/4" | __ | 1 3/8" | 00000000 | 0000 |
| 3" | __ | 1 1/8" | 00000000 | 00000 |
Caps for Unthreaded Pipe | ||||
| 35/64" | 1/4 | 7/16" | 00000000 | 0000 |
| 43/64" | 3/8 | 9/16" | 00000000 | 0000 |
| 27/32" | 1/2 | 7/16" | 00000000 | 0000 |
| 1 3/64" | 3/4 | 5/8" | 00000000 | 0000 |
| 1 5/16" | 1 | 11/16" | 00000000 | 0000 |
| 1 21/32" | 1 1/4 | 13/16" | 00000000 | 0000 |
| 1 29/32" | 1 1/2 | 15/16" | 00000000 | 0000 |
| 2 3/8" | 2 | 1 1/16" | 00000000 | 0000 |
| 3 1/2" | 3 | 1 3/8" | 00000000 | 00000 |
| 4" | 3 1/2 | 1 1/2" | 00000000 | 00000 |
| 6 5/8" | 6 | 1 7/8" | 00000000 | 00000 |
Breather Vents
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks. You can also use these breather vents to block debris from entering equipment.
Style G has a slotted drive for installation with a screwdriver.
For technical drawings and 3-D models, click on a part number.
| Style | Thread Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Each | |
UNF Male | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
316 Stainless Steel Body and Fitting | ||||||||||
| G | 10-32 | 10 scfm @ 100 psi | 100 | 750° | 7/16" | 3/16" | Air, Inert Gas | 10 | 0000000 | 000000 |
UNC Male | ||||||||||
316 Stainless Steel Body and Fitting | ||||||||||
| G | 3/8"-16 | 50 scfm @ 100 psi | 100 | 750° | 1" | 3/8" | Air, Inert Gas | 10 | 0000000 | 00000 |
| G | 5/16"-18 | 25 scfm @ 100 psi | 100 | 750° | 1 7/16" | 5/16" | Air, Inert Gas | 10 | 0000000 | 00000 |
Self-Draining Breather Vents
Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain. They have a silicone O-ring above the threads for a tight seal. Install them at the lowest point of the enclosure. Breather vents meet IP66 for protection in washdown environments. Use them to prevent excess vacuum and pressure in cylinders, gear boxes, and tanks and to block debris from entering equipment.
316 stainless steel breather vents have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Lockable Breather Vents with Cap
Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering. These breather vents allow you to add a filling port to your hydraulic tank while protecting against excess pressure and vacuum. Use them to stop debris from entering your tank. Breather vents mount on top of standard tank openings with included hardware. Padlock is not included.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Opening Dia. | Ht. | For Use With | Cap | Screen | Mount Type | Number of Bolt Holes | Bolts Included | Removes Particle Size Down To, microns | For Max. Padlock Shackle Dia. | Each | |
| 2 1/8" | 5 1/16" | Air, Oil | Steel | 304 Stainless Steel | Flange | 6 | Yes | 40 | 3/8" | 0000000 | 000000 |
Corrosion-Resistant Breather Vents
These breather vents withstand corrosion in damp environments. Use them to prevent excess vacuum and pressure in cylinders, gear boxes, and tanks and to block debris from entering equipment.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | For Use With | Removes Particle Size Down To, microns | Each | |
NPT Male | ||||||||
|---|---|---|---|---|---|---|---|---|
304 Stainless Steel Body and Fitting | ||||||||
| 1/8 | 26 scfm @ 100 psi | 150 | 400° | 1/2" | Air, Inert Gas | 100 | 0000000 | 00000 |
| 1/4 | 35 scfm @ 100 psi | 150 | 400° | 11/16" | Air, Inert Gas | 100 | 0000000 | 0000 |
| 3/8 | 87 scfm @ 100 psi | 150 | 400° | 13/16" | Air, Inert Gas | 100 | 0000000 | 00000 |
| 1/2 | 131 scfm @ 100 psi | 150 | 400° | 15/16" | Air, Inert Gas | 100 | 0000000 | 00000 |
| 3/4 | 219 scfm @ 100 psi | 150 | 400° | 15/16" | Air, Inert Gas | 100 | 0000000 | 00000 |
| 1 | 306 scfm @ 100 psi | 150 | 400° | 1 3/16" | Air, Inert Gas | 100 | 0000000 | 00000 |
Washdown Weather-Resistant Breather Vents
These breather vents are rated NEMA 6 to withstand periodic submersion in water. Install them in enclosures to stop the buildup of pressure and vacuum and to prevent debris from entering equipment. Breather vents can be used with enclosures that are rated NEMA 4, 12, and 13 for washdown environments and splashing oil and coolant.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | O-Ring Material | Removes Particle Size Down To, microns | Each | |
Threaded Metric Male | |||||||||
|---|---|---|---|---|---|---|---|---|---|
303 Stainless Steel Body and Fitting | |||||||||
| M3 | 1.4 | 158° | 5/16" | 1/4" | Air | EPDM Rubber | 3 | 0000000 | 000000 |