Body Material Body Material |
|---|
|
Holding Capacity Holding Capacity |
|---|
|
Handle Material Handle Material |
|---|
|
Overall Length When Clamped Overall LengthWhen Clamped |
|---|
|
|
Draw Arm Adjustability Draw Arm Adjustability |
|---|
|
Holding Screw Tip Material Holding Screw Tip Material |
|---|
|
Overall Height When Clamped Overall HeightWhen Clamped |
|---|
|
|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
|
|
Draw Arm Clearance Draw Arm Clearance |
|---|
|
|
|
Draw Arm Travel Draw Arm Travel |
|---|
|
|
|
Latch-Style Toggle Clamps
Fit the draw arm over a latch plate and pull the handle to clamp.
Clamps with adjustable draw arm allow you to change the length of the arm.
Stainless steel clamps have good corrosion resistance.
Styles B and D do not include a latch plate. To use these clamps with a plate, you’ll have to fabricate your own.
For technical drawings and 3-D models, click on a part number.
Clamps | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | Replacement Latch Plates | Replacement Draw Arms | Replacement Draw Arm Pins | Replacement Handle Grips | ||||||||||
| Holding Cap., lbs. | Travel | Adjustment Lg. | Clearance | O'all Ht. | O'all Lg. | Each | Each | Each | Each | Each | |||||
Style A—U-Style Draw Arm with Latch Plate | |||||||||||||||
18-8 Stainless Steel | |||||||||||||||
| 360 | 1 3/16" | 3/8" | 1/2" | 1 3/16" | 4 7/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
| 360 | 1 3/16" | 3/8" | 1/2" | 1 3/16" | 5 7/8" | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 000 |
| 360 | 1 1/4" | 13/32" | 1/2" | 1 1/4" | 4 1/4" | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 000 |
| 720 | 1 3/4" | 1/2" | 3/4" | 2" | 6 9/16" | 0000000 | 00000 | 00000000 | 0000 | 000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 720 | 1 3/4" | 7/8" | 11/16" | 2" | 7 1/16" | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 720 | 1 3/4" | 7/8" | 11/16" | 2" | 8 1/16" | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 2,000 | 2 1/2" | 23/32" | 1" | 3" | 8 15/16" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
Style B—U-Style Draw Arm | |||||||||||||||
18-8 Stainless Steel | |||||||||||||||
| 375 | 4" | __ | 1 5/8" | 2" | 8 3/8" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 00000000 | 0000 |
Style C—U-Style Draw Arm with Latch Plate | |||||||||||||||
18-8 Stainless Steel | |||||||||||||||
| 6,000 | 2 3/16" | 1 1/16" | 1 3/16" | 3 5/8" | 11 23/32" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 |
| 7,500 | 2 3/16" | 1 3/8" | 1 1/8" | 3 11/16" | 9 5/8" | 0000000 | 000000 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 |
Style D—Hook-Style Draw Arm | |||||||||||||||
18-8 Stainless Steel | |||||||||||||||
| 200 | 2 3/8" | 9/32" | 5/8" | 1" | 6" | 0000000 | 00000 | 000000 | 00 | 00000000 | 0000 | 000000 | 00 | 0000000 | 000 |
| 375 | 4" | 15/32" | 3/4" | 1 3/8" | 8 7/8" | 0000000 | 00000 | 000000 | 00 | 00000000 | 00000 | 000000 | 00 | 00000000 | 0000 |
| 450 | 4" | 1/2" | 3/4" | 1 5/16" | 10 13/16" | 00000000 | 00000 | 000000 | 00 | 00000000 | 00000 | 000000 | 00 | 00000000 | 0000 |
| 750 | 5 3/8" | 15/16" | 1 1/2" | 2 1/4" | 12" | 0000000 | 00000 | 000000 | 00 | 00000000 | 00000 | 000000 | 00 | 00000000 | 0000 |
| 1,000 | 6 1/8" | 1 5/32" | 1 7/8" | 2 3/4" | 13 1/2" | 0000000 | 000000 | 000000 | 00 | 00000000 | 00000 | 000000 | 00 | 00000000 | 0000 |
| 1,500 | 3/4" | 9/16" | 11/16" | 1 3/4" | 9" | 0000000 | 00000 | 000000 | 00 | 00000000 | 0000 | 000000 | 00 | 0000000 | 000 |
Latch-Style Toggle Clamps with Locking Handle
Push the lever to lock the handle and prevent accidental opening. Fit the draw arm over a latch plate and pull the handle to clamp. These clamps have an adjustable draw arm that allows you to change the length.
Stainless steel clamps have good corrosion resistance.
Clamps with hook-style draw arm do not include a latch plate. To use these clamps with a plate, you’ll have to fabricate your own.
For technical drawings and 3-D models, click on a part number.
Clamps | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | Replacement Latch Plates | |||||||||
| Holding Capacity, lbs. | Travel | Adjustment Lg. | Clearance | Overall Ht. | Overall Lg. | Grip Style | Latch Plate Included | Each | Each | ||
U-Style Draw Arm | |||||||||||
18-8 Stainless Steel | |||||||||||
| 360 | 1 3/16" | 13/32" | 1/2" | 1 1/4" | 4 1/4" | Cushion | Yes | 00000000 | 000000 | 00000000 | 00000 |
| 720 | 1 3/4" | 1/2" | 3/4" | 2" | 6 9/16" | Cushion | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 720 | 1 3/4" | 7/8" | 11/16" | 2" | 6 1/16" | Cushion | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 2,000 | 2 1/2" | 23/32" | 1" | 3" | 8 15/16" | Cushion | Yes | 00000000 | 00000 | 00000000 | 00000 |
| 3,100 | 2 1/8" | 9/16" | 13/16" | 2 3/16" | 8 3/4" | Plain | Yes | 00000000 | 000000 | 000000000 | 00000 |
| 6,700 | 2 7/16" | 1" | 1 1/16" | 2 11/16" | 10 11/16" | Plain | Yes | 00000000 | 000000 | 000000000 | 00000 |
Hook-Style Draw Arm | |||||||||||
18-8 Stainless Steel | |||||||||||
| 350 | 4" | 1/2" | 3/4" | 1 13/16" | 9 7/16" | Cushion | No | 00000000 | 00000 | 000000 | 00 |
Right-Angle Latch-Style Toggle Clamps
Mount the clamp on a lid and the latch plate on the side of a container. Fit the draw arm over a latch plate and pull the handle to clamp.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | Replacement Latch Plates | ||||||||
| Holding Capacity, lbs. | Travel | Adjustment Lg. | Clearance | Overall Ht. | Overall Lg. | Latch Plate Included | Each | Each | ||
U-Style Draw Arm | ||||||||||
Steel | ||||||||||
| 500 | 1 1/2" | 15/16" | 3/16" | 3 3/8" | 3 1/2" | Yes | 0000000 | 000000 | 000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 500 | 1 5/8" | 1/2" | 2" | 2" | 3 1/2" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 1,000 | 2 1/8" | 25/32" | 2 7/8" | 2 3/8" | 4 1/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 2,000 | 2 1/2" | 1 1/4" | 3 7/8" | 3 1/2" | 5 7/8" | Yes | 0000000 | 00000 | 000000 | 00000 |
Right-Angle Latch-Style Toggle
Clamps with Locking Handle
Push the lever to lock the handle and prevent accidental opening. Mount the clamp on a lid and the latch plate on the side of a container. Fit the draw arm over a latch plate and pull the handle to clamp.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | Replacement Latch Plates | ||||||||
| Holding Capacity, lbs. | Travel | Adjustment Lg. | Clearance | Overall Ht. | Overall Lg. | Latch Plate Included | Each | Each | ||
U-Style Draw Arm | ||||||||||
18-8 Stainless Steel | ||||||||||
| 500 | 1 1/2" | 15/16" | 3/16" | 3 3/8" | 3 1/2" | Yes | 0000000 | 000000 | 000000 | 00000 |
| 1,000 | 2 1/16" | 1 5/16" | 3/8" | 4 1/2" | 4 1/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 2,000 | 2 7/16" | 1 3/4" | 1/2" | 6 1/2" | 5 3/4" | Yes | 0000000 | 00000 | 000000 | 00000 |
Undermount Hold-Down Toggle Clamps
Mount these clamps below a surface. They are often used to clamp lids and covers on containers.
For technical drawings and 3-D models, click on a part number.
Arm | When Clamped | Holding Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Max. Clamping Clearance | Ht. | Lg. | Opening Angle | O'all Lg. | O'all Ht. | No. of | Tip Material | Thread Size | Each | |
With Solid Arm | |||||||||||
18-8 Stainless Steel | |||||||||||
| 800 | 1 15/32" | 1 3/4" | 1 5/8" | 90° | 2 15/16" | 8 11/16" | 1 | Stainless Steel | M12 | 0000000 | 000000 |
Dual-Mount Hold-Down Toggle Clamps
Two sets of mounting holes allow mounting on the bottom or side. These clamps have an open arm, so you can move the holding screw to any position along the arm. To achieve maximum holding capacity, position the screw closest to the base. Capacity decreases by as much as 65% when the screw is positioned at the end of the arm.
For technical drawings and 3-D models, click on a part number.
Arm | When Clamped | Holding Screws | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Max. Clamping Clearance | Ht. | Lg. | Opening Angle | O'all Lg. | O'all Ht. | No. of | Tip Material | Thread Size | Body Material | Each | |
With Open Arm | ||||||||||||
| 375 | 1 23/32" | 2 3/4" | 2 5/8" | 185° | 6 5/8" | 5 3/8" | 2 | Steel, Rubber | 5/16"-18 | Steel | 00000000 | 000000 |
Long-Life Dual-Mount Air-Powered
Hold-Down Toggle Clamps
These clamps have double the service life of other air-powered toggle clamps. Use for repetitive clamping and in production environments. They have two sets of holes for mounting on the bottom or side. Air from one inlet port engages the clamp, and air from the other inlet port disengages it. Clamps maintain the full-rated holding capacity even with a loss of air pressure. Fittings (not included) are required to connect the clamp’s ports to a control valve and an air line.
For technical drawings and 3-D models, click on a part number.
Arm | When Clamped | Air Inlet and Outlet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Max. Clamping Clearance | Ht. | Lg. | Opening Angle | O'all Lg. | O'all Ht. | Max. Air Inlet Pressure, psi | Pipe Size | Thread Type | Gender | Temperature Range, °F | Body Material | Each | |
With Solid Arm | ||||||||||||||
| 220 | 3/16" | 3/16" | 1 9/16" | 120° | 2 1/2" | 4 1/16" | 87 | 10-32 | UNF | Male | -14° to 194° | 7170 Aluminum | 000000 | 0000000 |
| 530 | 1/4" | 1/4" | 2" | 120° | 3" | 4 11/16" | 87 | 10-32 | UNF | Male | -14° to 194° | 7170 Aluminum | 000000 | 000000 |
| 885 | 3/8" | 3/8" | 2 1/8" | 120° | 3 1/2" | 5 15/16" | 87 | 10-32 | UNF | Male | -14° to 194° | 7170 Aluminum | 000000 | 000000 |
Dual-Mount Air-Powered Hold-Down Toggle Clamps
Two sets of holes allow mounting on the bottom or side. Use these clamps for repetitive clamping and in production environments. Air from one inlet port engages the clamp, and air from the other inlet port disengages it. Clamps maintain the full-rated holding capacity even with a loss of air pressure. They have an open arm, so you can move the holding screw to any position along the arm. To achieve maximum holding capacity, position the screw closest to the base. Capacity decreases by as much as 65% when the screw is positioned at the end of the arm. Fittings (not included) are required to connect the clamp’s ports to a control valve and an air line.
For technical drawings and 3-D models, click on a part number.
Arm | When Clamped | Holding Screws | Air Inlet and Outlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Max. Clamping Clearance | Ht. | Lg. | Opening Angle | O'all Lg. | O'all Ht. | No. of | Tip Material | Thread Size | Max. Air Inlet Pressure, psi | Pipe Size | Thread Type | Gender | Temperature Range, °F | Body Material | Each | |
With Open Arm | |||||||||||||||||
| 350 | 1 5/8" | 2 11/16" | 2 3/8" | 95° | 6 1/4" | 7 1/2" | 2 | Steel, Rubber | 5/16"-18 | 145 | 1/8 | NPT | Female | -14° to 194° | Steel | 0000000 | 0000000 |
| 600 | 2 5/8" | 3 7/8" | 3 1/4" | 85° | 8 5/8" | 9" | 2 | Steel, Rubber | 3/8"-16 | 145 | 1/8 | NPT | Female | -14° to 194° | Steel | 0000000 | 000000 |