Material Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Finish Finish |
|---|
|
Tooth Style Tooth Style |
|---|
 |  |
| Alternating | Parallel |
Specifications Met Specifications Met |
|---|
Metal Trim
Made of aluminum or stainless steel, this trim withstands heavy impact for maximum surface protection. It's often used on panels, boards, signs, and mirrors to protect the edges. Since all of this trim is rigid and does not bend, it's designed for straight surfaces. It can be used outdoors.
Stainless steel trim has excellent corrosion resistance, making it the best choice for harsh environments. It also has good chemical resistance.
Push-on trim fits onto an edge and it grips on three sides for a tight hold.
Screw-in trim mounts with fasteners. Trim that does not have mounting holes requires drilling holes.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | 6-ft. Length | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inside Wd. (A) | Outside Ht. (D) | Short Leg Outside Ht. (F) | Thick. | Flexibility | For Use Outdoors | Appearance | Style | Dia. | Ctr.-to-Ctr. | Mounting Fasteners Included | Each | |
Stainless Steel | ||||||||||||
| 1/4" | 3/4" | 5/16" | 1/64" | Rigid | Yes | Polished | Straight | 1/8" | 7 3/16" | No | 0000000 | 000000 |
Cushioned Flexible Metal Trim
Cushioning on the top provides added protection from impact. This nylon-coated stainless steel trim combines strength with flexibility for a snug hold. It can also protect wire, cable, and hose. Push onto your edge or object to install.
Made of stainless steel, this trim has excellent corrosion resistance and good chemical resistance, making it the best choice for harsh and outdoor environments. It meets UL 94 V-0 flammability standards.
Trim with alternating teeth bends up to 90° (side to side or up and down) to fit around tight turns. It holds best on edges with a square profile but should not be used on edges that bend in more than one direction at once.
Trim with parallel teeth has a stronger grip than trim with alternating teeth, so it's better for edges with round and irregular profiles. It also handles twists and turns, such as on the edge of a spiral conveyor. It is not flexible enough to bend around a 90° corner.
Use metal-cutting shears to cut trim to your desired length.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Specifications Met | Color | Each | |
5-ft. Length | ||||||||||
Nylon-Coated Stainless Steel | ||||||||||
Alternating Teeth | ||||||||||
| 1/32" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 3/64" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | UL 94 V-0 | Black | 00000000 | 00000 |
| 1/16" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | UL 94 V-0 | Black | 00000000 | 00000 |
| 5/64" | 3/16" | 15/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 3/32" | 3/16" | 15/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 1/8" | 3/16" | 15/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 3/16" | 3/16" | 21/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 1/4" | 1/8" | 23/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
Parallel Teeth | ||||||||||
| 1/32" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 3/64" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 1/16" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 5/64" | 3/16" | 9/32" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
| 1/8" | 3/16" | 9/32" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 00000 |
25-ft. Length | ||||||||||
Nylon-Coated Stainless Steel | ||||||||||
Alternating Teeth | ||||||||||
| 1/32" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 3/64" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | UL 94 V-0 | Black | 00000000 | 000000 |
| 1/16" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | UL 94 V-0 | Black | 00000000 | 000000 |
| 5/64" | 3/16" | 15/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 3/32" | 3/16" | 15/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 1/8" | 3/16" | 15/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 3/16" | 3/16" | 21/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 1/4" | 1/8" | 23/64" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
Parallel Teeth | ||||||||||
| 1/32" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 3/64" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 1/16" | 3/16" | 3/16" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 5/64" | 3/16" | 9/32" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 3/32" | 3/16" | 9/32" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| 1/8" | 3/16" | 9/32" | 15/64" | Flexible | -40° to 180° | Yes | MIL-STD-202, UL 94 V-0 | Black | 000000000 | 000000 |
| Metal-Cutting Shears | 00000000 | Each | 000000 |
High-Temperature Flexible Metal Trim
Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges. All of this trim has excellent corrosion resistance, making it the best choice for harsh environments. It also has good chemical resistance. Push this trim onto your edge to install. It can be bent along a gradual curve. It can also be used outdoors. Meets UL 94 V-0 for flammability standards.
Use the metal-cutting shears (sold separately) to cut trim to desired length.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | 5-ft. Length | 25-ft. Length | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Color | Specifications Met | Each | Each | ||
304 Stainless Steel | ||||||||||||
| 1/16" | 3/16" | 13/64" | 1/8" | Flexible | -40° to 800° | Yes | Gray | UL 94 V-0 | 00000000 | 000000 | 00000000 | 000000 |
| 1/8" | 3/16" | 13/64" | 3/16" | Flexible | -40° to 800° | Yes | Gray | UL 94 V-0 | 00000000 | 00000 | 00000000 | 000000 |
| Metal-Cutting Shears | 00000000 | Each | 000000 |
Flexible Metal Trim
This nylon-coated stainless steel trim combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges. It can also protect wire, cable, and hose. Made of stainless steel, this trim has excellent corrosion resistance, making it the best choice for harsh environments. It also has good chemical resistance. Push this trim onto your edge or object to install. It can be bent along a gradual curve. It can also be used outdoors. Meets UL 94 V-0 for flammability standards.
Use the metal-cutting shears (sold separately) to cut trim to desired length.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | 5-ft. Length | 25-ft. Length | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Specifications Met | Color | Each | Each | ||
Nylon-Coated Stainless Steel | ||||||||||||
| 3/64" | 3/16" | 1/8" | 13/64" | Flexible | -40° to 280° | Yes | UL 94 V-0 | Black | 00000000 | 000000 | 00000000 | 000000 |
| 1/16" | 3/16" | 1/8" | 13/64" | Flexible | -40° to 280° | Yes | UL 94 V-0 | Black | 00000000 | 00000 | 00000000 | 00000 |
| Metal-Cutting Shears | 00000000 | Each | 000000 |
Metal Corner Guards
These metal guards provide more impact protection than plastic guards. Commonly used in warehouse and manufacturing areas, they protect corners on walls and other surfaces from impact.
Stainless steel guards have excellent corrosion resistance. 304 stainless steel is more corrosion resistant than 430 stainless steel. Adhesive-back guards allow for easy installation.
Glue-on guards require contact adhesive to adhere to surfaces. Their temperatue range depends on the adhesive you use.
For technical drawings and 3-D models, click on a part number.
4-ft. Length | 8-ft. Length | ||||||
|---|---|---|---|---|---|---|---|
| Wd. | Thick. | For Use Outdoors | Temperature Range, °F | Each | Each | ||
Style 1 | |||||||
304 Stainless Steel—Adhesive Back | |||||||
| 1 1/8" | 1/16" | No | 60° to 120° | 0000000 | 000000 | 0000000 | 000000 |
| 2 1/2" | 1/16" | No | 60° to 120° | 0000000 | 00000 | 0000000 | 000000 |
| 3 1/2" | 1/16" | No | 60° to 120° | 0000000 | 000000 | 0000000 | 000000 |
304 Stainless Steel—Glue On | |||||||
| 1 1/8" | 1/16" | No | __ | 0000000 | 00000 | 0000000 | 00000 |
| 2 1/2" | 1/16" | No | __ | 0000000 | 00000 | 0000000 | 000000 |
| 3 1/2" | 1/16" | No | __ | 0000000 | 00000 | 0000000 | 000000 |
430 Stainless Steel—Adhesive Back | |||||||
| 1 1/8" | 1/16" | No | 60° to 120° | 0000000 | 00000 | 0000000 | 00000 |
| 2 1/2" | 1/16" | No | 60° to 120° | 0000000 | 00000 | 0000000 | 000000 |
| 3 1/2" | 1/16" | No | 60° to 120° | 0000000 | 00000 | 0000000 | 000000 |
430 Stainless Steel—Glue On | |||||||
| 1 1/8" | 1/16" | No | __ | 0000000 | 00000 | 0000000 | 00000 |
| 2 1/2" | 1/16" | No | __ | 0000000 | 00000 | 0000000 | 000000 |
| 3 1/2" | 1/16" | No | __ | 0000000 | 00000 | 0000000 | 000000 |
Door Kick Plates
Also known as door plates, armor plates, and mop plates, kick plates protect the base of a door from damage caused by foot traffic and equipment. Choose a kick plate with a width that is 2” narrower than the overall width of the door to prevent interference with the door’s opening and closing. All can be used outdoors.
Screw-in plates mount with fasteners.
Adhesive-back plates allow for easy installation.
Stainless steel plates have excellent corrosion resistance. 304 stainless steel has good chemical resistance. 316 stainless steel is more corrosion resistant than 304 stainless steel--with excellent resistance to chemicals and salt water.
Aluminum plates are lightweight and have good corrosion resistance.
Brass and bronze plates provide a more decorative finish than other plates. They have good corrosion resistance and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Ht. | Thick. | For Use Outdoors | Mounting Fasteners Included | Dull 304 Stainless Steel | Dull 316 Stainless Steel | Dull Aluminum | Dull Bronze | Polished Brass | |
24" Width | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 34" | 0.05" | Yes | Yes | 000000 | |||||
28" Width | |||||||||
| 6" | 0.05" | Yes | Yes | 000000 | |||||
| 8" | 0.05" | Yes | Yes | 000000 | |||||
| 10" | 0.05" | Yes | Yes | 000000 | |||||
| 12" | 0.05" | Yes | Yes | 000000 | |||||
| 36" | 0.05" | Yes | Yes | 000000 | |||||
| 42" | 0.05" | Yes | Yes | 000000 | |||||
30" Width | |||||||||
| 6" | 0.05" | Yes | Yes | 000000 | |||||
| 8" | 0.05" | Yes | Yes | 000000 | |||||
| 10" | 0.05" | Yes | Yes | 0000000 | |||||
| 12" | 0.05" | Yes | Yes | 0000000 | |||||
34" Width | |||||||||
| 6" | 0.05" | Yes | Yes | 0000000 | |||||
| 8" | 0.05" | Yes | Yes | 0000000 | |||||
| 10" | 0.05" | Yes | Yes | 0000000 | |||||
| 12" | 0.05" | Yes | Yes | 0000000 | |||||
| 16" | 0.05" | Yes | Yes | 0000000 | |||||
| 34" | 0.05" | Yes | Yes | 0000000 | |||||
| 36" | 0.05" | Yes | Yes | 0000000 | |||||
| 46" | 0.05" | Yes | Yes | 0000000 | |||||
36" Width | |||||||||
| 8" | 0.05" | Yes | Yes | 0000000 | |||||
| 10" | 0.05" | Yes | Yes | 0000000 | |||||
| 12" | 0.05" | Yes | Yes | 0000000 | |||||
48" Width | |||||||||
| 8" | 0.05" | Yes | Yes | 0000000 | |||||
| 12" | 0.05" | Yes | Yes | 0000000 | |||||
| 16" | 0.05" | Yes | Yes | 0000000 | |||||
Dull 304 Stainless Steel | ||||
|---|---|---|---|---|
| Ht. | Thick. | For Use Outdoors | Each | |
24" Width | ||||
| 34" | 0.05" | Yes | 0000000 | 0000000 |
28" Width | ||||
| 6" | 0.05" | Yes | 0000000 | 00000 |
| 8" | 0.05" | Yes | 0000000 | 00000 |
| 10" | 0.05" | Yes | 0000000 | 00000 |
| 12" | 0.05" | Yes | 0000000 | 00000 |
| 36" | 0.05" | Yes | 0000000 | 000000 |
| 42" | 0.05" | Yes | 0000000 | 000000 |
30" Width | ||||
| 6" | 0.05" | Yes | 0000000 | 00000 |
| 8" | 0.05" | Yes | 0000000 | 00000 |
| 10" | 0.05" | Yes | 0000000 | 00000 |
| 12" | 0.05" | Yes | 0000000 | 00000 |
34" Width | ||||
| 6" | 0.05" | Yes | 0000000 | 00000 |
| 8" | 0.05" | Yes | 0000000 | 00000 |
| 10" | 0.05" | Yes | 0000000 | 00000 |
| 12" | 0.05" | Yes | 0000000 | 00000 |
| 16" | 0.05" | Yes | 0000000 | 00000 |
| 34" | 0.05" | Yes | 0000000 | 000000 |
| 36" | 0.05" | Yes | 0000000 | 000000 |
| 46" | 0.05" | Yes | 0000000 | 000000 |
36" Width | ||||
| 8" | 0.05" | Yes | 0000000 | 00000 |
| 10" | 0.05" | Yes | 0000000 | 00000 |
| 12" | 0.05" | Yes | 0000000 | 00000 |
48" Width | ||||
| 8" | 0.05" | Yes | 0000000 | 00000 |
| 12" | 0.05" | Yes | 0000000 | 00000 |
| 16" | 0.05" | Yes | 0000000 | 000000 |
Door Edge Plates
Reinforce the edge of a door to guard it against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors. Made of stainless steel, all of these plates have excellent corrosion resistance and good chemical resistance. They can be used outdoors. Mount them with fasteners.
Style 2 wraps around the entire edge for added protection.
For technical drawings and 3-D models, click on a part number.
For Door | Dull Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Edge Angle | Thick. | Flange Wd. | Thick. | For Use Outdoors | Mounting Fasteners Included | Each | |
Style 1 | ||||||||
For Standard Door Edge Profille | ||||||||
| 36" | 90° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 000000 |
| 42" | 90° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 00000 |
| 84" | 90° | 1 3/4" | 3/4" | 0.06" | Yes | Yes | 0000000 | 000000 |
For Beveled Door Edge Profille | ||||||||
| 36" | 93° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 00000 |
| 42" | 93° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 00000 |
| 84" | 92° | 1 3/4" | 3/4" | 0.06" | Yes | Yes | 0000000 | 000000 |
Style 2 | ||||||||
For Standard Door Edge Profille | ||||||||
| 36" | 90° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 00000 |
| 42" | 90° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 00000 |
| 84" | 90° | 1 3/4" | 3/4" | 0.06" | Yes | Yes | 0000000 | 000000 |
For Beveled Door Edge Profille | ||||||||
| 36" | 93° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 00000 |
| 42" | 93° | 1 3/4" | 1 1/4" | 0.05" | Yes | Yes | 0000000 | 00000 |
| 84" | 91° | 1 3/4" | 3/4" | 0.06" | Yes | Yes | 0000000 | 000000 |
Reinforcing Door Edge Plates
Fortify a door's base as well as its bottom edge to guard them against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors. All can be used outdoors. Mount them with fasteners.
Stainless steel plates have excellent corrosion resistance and good chemical resistance.
For technical drawings and 3-D models, click on a part number.