Material Material |
|---|
|
Push-to-Close Latch Type Push-to-Close Latch Type |
|---|
|
Mounting Style Mounting Style |
|---|
|
Door Mounting Location Door Mounting Location |
|---|
|
About Push-to-Close Latches
More
Vibration-Resistant Push-to-Close Latches with Handle
Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold. Mount these latches horizontally to the face of the door with the strike plate mounted on the frame.
For technical drawings and 3-D models, click on a part number.
Strike Plate | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Wd. | Ht. | Projection | Lg. | Wd. | Mounting Fasteners Included | Each | ||
| 4 | 316 Stainless Steel | Polished | 2 5/8" | 3/4" | 1" | 11/16" | 1 13/16" | Yes | 00000000 | 000000 |
Pressure-Venting Push-to-Close Latches with Handle
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level. They can also be manually opened by pulling on the handle. Mount latches horizontally to the face of the door with the strike plate mounted on the frame. To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side latch; if the hinges are on the left, order a left-side latch.
Door offset is the space between the door face and the frame when the door is closed. Pressure release force is the amount of pressure an enclosed area can sustain before the latch opens. Adjust the catch to make the latch more or less sensitive to pressure. Styles 1 and 2 adjust with a slotted screwdriver.
For technical drawings and 3-D models, click on a part number.
Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Release Force, lbs./sq. ft. | Lg. | Projection | Mounting Hole Ctr.-to-Ctr. (B) | Strike Plate Mounting Hole Ctr.-to-Ctr. (D) | Fasteners Included | Screw Size | Specifications Met | Each | |
316 Stainless Steel—Polished | ||||||||||
| 0" to 3/16" | 4 to 17 | 2 3/8" | 2 5/16" | 1 3/8" | 1 3/8" | No | 1/4" | FM Approved | 000000 | 0000000 |
Paddle-Handle Push-to-Close Latches
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
For technical drawings and 3-D models, click on a part number.
For Cutout | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Each | |
304 Stainless Steel—Dull | ||||||||||
| 1/16" | 1/8" | 1" | 1 9/16" | 1 1/8" | 1 3/4" | 5/16" | 7/16" | Yes | 00000000 | 000000 |
| 1/16" | 3/16" | 1 7/16" | 1 7/8" | 1 7/8" | 2 1/4" | 1" | 1/2" | Yes | 00000000 | 00000 |
| 1/4" | 5/16" | 2 3/16" | 2 13/16" | 2 11/16" | 3 5/16" | 1 7/16" | 5/16" | Yes | 00000000 | 00000 |
| 3/8" | 1/2" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | 00000000 | 00000 |
For Cutout | Mounting Hole | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Ctr.-to-Ctr. | Thread Size | Dp. | Fasteners Included | Screw Size | Each | |
300 Series Stainless Steel—Dull | ||||||||||||||
| 3/16" | 3/16" | 3 1/8" | 2" | 3 5/16" | 2 1/4" | 1/2" | 1/4" | 2" | 8-32 | 0.25" | No | No. 8 | 00000000 | 0000000 |
Ring-Handle Push-to-Close Latches
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way. These latches open from the inside as well as the outside. From the outside, pull the recessed ring to unlatch. From the inside, slide the release tab on the back of the latch.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Max. Latching Distance | For Through Hole Dia. | Dia. | Projection | Rear Projection | Latch Bolt Projection | Strike Plate Material | Fasteners Included | Screw Size | Each | |
Through-Hole Mount | |||||||||||
316 Stainless Steel—Polished | |||||||||||
| 1/8"-1/4" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 000000 |
| 5/16"-7/16" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
| 1/2"-5/8" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
| 11/16"-7/8" | 1" | 2" | 2 7/16" | 1/8" | 1 7/16" | 1/4" | Stainless Steel | No | No. 10 | 0000000 | 00000 |
Paddle-Handle Keyed Push-to-Close Locks
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers. They're keyed alike, choose them if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
For Cutout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Key Number | No. of Keys Included | Each | |
304 Stainless Steel—Dull | ||||||||||||
| 3/8" | 1/2" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | CH751 | 2 | 00000000 | 000000 |
Padlockable Push-to-Close Latches with Handle
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame. Latches have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | (A) | (B) | (C) | (D) | (E) | (F) | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Each | ||
304 Stainless Steel—Polished | ||||||||||||||
| 1 | 0" to 5/16" | 5 1/4" | 2" | 13/16" | 1 5/16" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 000000 |
| 1 | 5/8" to 1 1/4" | 5 1/4" | 2" | 13/16" | 1 5/16" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 00000 |
| 2 | 0" to 3/8" | 5 1/4" | 2 5/16" | 1 1/4" | 1 3/4" | 2 1/16" | 3/4" | 2 1/16" | 2 1/16" | 1/4" | No | No. 10 | 000000 | 000000 |
| 2 | 0" to 1/2" | 4 1/4" | 2 1/2" | 1 3/8" | 1 1/8" | 1 5/8" | 5/8" | 1 5/8" | 1 5/8" | 1/4" | No | No. 8 | 000000 | 000000 |
| 2 | 1/2" to 1 1/4" | 5 1/4" | 2 5/16" | 1 1/4" | 1 3/4" | 2 1/16" | 3/4" | 2 1/16" | 2 1/16" | 1/4" | No | No. 10 | 000000 | 000000 |
| 2 | 9/16" to 1 1/4" | 4 1/4" | 2 1/2" | 1 3/8" | 1 1/8" | 1 5/8" | 5/8" | 1 5/8" | 1 5/8" | 1/4" | No | No. 8 | 000000 | 000000 |
Padlockable Push-to-Close Latches
with Emergency Release Handle
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure. Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Latches have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Emergency Release | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | For Max. Padlock Shackle Dia. | (A) | (B) | (C) | (D) | (E) | Handle Material | Rod Material | Fasteners Included | Screw Size | Each | ||
304 Stainless Steel—Polished | |||||||||||||||
| 2 | 0" to 1/2" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | Stainless Steel | Stainless Steel | No | 1/4" | 0000000 | 0000000 |
| 2 | 5/8" to 1 1/4" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | Stainless Steel | Stainless Steel | No | 1/4" | 0000000 | 000000 |
| Replacement Steel Handle | 000000 | Each | 000000 |
Push-to-Close Latches with Pop-Out Knob
When not in use, push the knob in so it's flush and out of the way; it pops out with a touch. Latches open with a turn of the knob and can be secured with the knob in or out.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Max. Latching Distance | For Through Hole Dia. | Dia. | Projection | Rear Projection | Latch Bolt Projection | Strike Plate Material | Fasteners Included | Screw Size | Each | |
Through-Hole Mount | |||||||||||
Black Plastic | |||||||||||
| 3/4" | 1 3/8" | 1 1/4" | 1 1/2" | 1/4" | 1 7/8" | 5/16" | Stainless Steel | No | No. 10 | 0000000 | 000000 |
Gray Plastic | |||||||||||
| 3/4" | 1 3/8" | 1 1/4" | 1 1/2" | 1/4" | 1 7/8" | 5/16" | Stainless Steel | No | No. 10 | 0000000 | 00000 |