Filter by
Roller Chain Trade Number
Chain Style
Roller Chain Type
Length
Roller Diameter
Working Load
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Finish
Specifications Met
Roller Chain and Links
 |  |
Chain | Connecting Links |
 |  |
Adding Links | Adding-and-Connecting Links |
 |
Pair this chain with sprockets to transmit power between rotating shafts. Like the chain on a bike, the side plates have a figure-eight shape that grips the sprockets without slipping.
Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.
Corrosion-Resistant 304 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.
Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion resistant roller chain won’t degrade when exposed to salt water and harsh chemicals.
Connecting Link—Use a single link to join both ends of your chain. Start by removing the spring clip or cotter pin from the link’s side plate. Then, slide the link pins into the mating rollers at each end of your chain and snap the clip back on. Also known as master links.
Adding Link—Attach with a connecting link to extend the length of your chain. Each link adds a length equal to the chain’s pitch. Also known as roller
links.
Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain—except for trade number 25, which requires a separate connecting link. Remove
the side plate to install. Also known as half links and offset links.
Chain | Connecting Links | Adding Links | Adding-and-Connecting Links | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller Chain | |||||||||||||||
Trade No. | Std. | Pitch | Roller Dia. | Roller Wd. | Working Load, lb. | Per Ft. | Each | Each | Each | ||||||
Single Strand | |||||||||||||||
Corrosion-Resistant 304 Stainless Steel | |||||||||||||||
| — | — | 0.1475" | 0.090" | 0.072" | 11 | 7142K3 | 000000 | 7142K4 | 00000 | ——— | 0 | ——— | 0 | ||
| 25 | ANSI | 1/4" | 0.130" | 1/8" | 20 | 6264K1 | 00000 | 6264K2 | 0000 | ——— | 0 | 6264K3 | 000000 | ||
| 35 | ANSI | 3/8" | 0.200" | 3/16" | 60 | 6264K84 | 00000 | 6264K51 | 0000 | 6264K61 | 00000 | 6264K71 | 0000 | ||
| 41 | ANSI | 1/2" | 0.306" | 1/4" | 75 | 6264K11 | 00000 | 6264K122 | 0000 | ——— | 0 | 6264K123 | 00000 | ||
| 40 | ANSI | 1/2" | 0.312" | 5/16" | 95 | 6264K85 | 00000 | 6264K52 | 0000 | 6264K62 | 0000 | 6264K72 | 00000 | ||
| 50 | ANSI | 5/8" | 0.400" | 3/8" | 150 | 6264K86 | 00000 | 6264K53 | 0000 | 6264K63 | 0000 | 6264K73 | 00000 | ||
| 60 | ANSI | 3/4" | 0.469" | 1/2" | 230 | 6264K87 | 00000 | 6264K54 | 0000 | 6264K64 | 0000 | 6264K74 | 00000 | ||
| 80 | ANSI | 1" | 0.625" | 5/8" | 390 | 6264K88 | 00000 | 6264K55 | 00000 | 6264K65 | 00000 | 6264K75 | 00000 | ||
| 100 | ANSI | 1 1/4" | 0.750" | 3/4" | 580 | 6264K92 | 000000 | 6264K56 | 00000 | ——— | 0 | 6264K76 | 00000 | ||
| 120 | ANSI | 1 1/2" | 0.875" | 1" | 860 | 6264K93 | 000000 | 6264K57 | 00000 | ——— | 0 | 6264K77 | 00000 | ||
| 05B | ISO | 8 mm | 5.00 mm | 3.00 mm | 25 | 60295K81 | 00000 | 60295K62 | 0000 | ——— | 0 | 60295K72 | 00000 | ||
| 06B | ISO | 3/8" | 0.250" | 0.225" | 60 | 60295K82 | 00000 | 60295K63 | 0000 | ——— | 0 | 60295K73 | 00000 | ||
| 08B | ISO | 1/2" | 0.335" | 0.305" | 110 | 60295K83 | 00000 | 60295K64 | 0000 | ——— | 0 | 60295K74 | 00000 | ||
| 10B | ISO | 5/8" | 0.400" | 0.380" | 150 | 60295K84 | 00000 | 60295K65 | 0000 | ——— | 0 | 60295K75 | 00000 | ||
| 12B | ISO | 3/4" | 0.475" | 0.460" | 200 | 60295K85 | 00000 | 60295K66 | 00000 | ——— | 0 | 60295K76 | 00000 | ||
| 16B | ISO | 1" | 0.625" | 0.670" | 460 | 60295K86 | 00000 | 60295K67 | 00000 | ——— | 0 | 60295K77 | 00000 | ||
Highly Corrosion-Resistant 316 Stainless Steel | |||||||||||||||
| 40 | ANSI | 1/2" | 0.312" | 5/16" | 95 | 5960K1 | 000000 | 5960K11 | 00000 | ——— | 0 | 5960K21 | 00000 | ||
| 50 | ANSI | 5/8" | 0.400" | 3/8" | 150 | 5960K2 | 000000 | 5960K12 | 00000 | ——— | 0 | 5960K22 | 00000 | ||
Double Strand | |||||||||||||||
Corrosion-Resistant 304 Stainless Steel | |||||||||||||||
| 40-2 | ANSI | 1/2" | 0.312" | 5/16" | 190 | 2327K1 | 00000 | 2327K11 | 00000 | ——— | 0 | 2327K12 | 00000 | ||
| 50-2 | ANSI | 5/8" | 0.400" | 3/8" | 300 | 2327K2 | 00000 | 2327K21 | 00000 | ——— | 0 | 2327K22 | 00000 | ||
| 60-2 | ANSI | 3/4" | 0.469" | 1/2" | 460 | 2327K3 | 00000 | 2327K31 | 00000 | ——— | 0 | 2327K32 | 00000 | ||
Flat-Edge Roller Chain and Links
 |
Chain |
 |
Connecting Links |
 |
Adding Links |
 |
Adding-and-Connecting Links |
 |
No more hang-ups thanks to the flat, oblong side plates that create a level surface to keep items moving along conveyor lines. Unlike standard roller chain, there are no divots to snag products. Pair this chain with sprockets to transmit power between rotating shafts.
Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.
Double Pitch—This chain has links that are twice as long as those on a single-pitch chain, making it lighter in weight and more energy-efficient over long drives. However, it operates at slower speeds. Use it with standard sprockets that have at least 24 teeth.
Corrosion-Resistant 304 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.
Connecting Link—Use a single link to join both ends of your chain. Start by removing the spring clip or cotter pin from the link’s side plate. Then, slide the link pins into the mating rollers at each end of your chain and snap the clip back on. Also known as master links.
Adding Link—Attach with a connecting link to extend the length of your chain. Each link adds a length equal to the chain’s pitch. Also known as roller
links.
Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.
C2060H and C2080H—Best for minimizing shock loads from abrupt starts and stops. The thick side plates on this chain absorb jolts from motor startups, emergency braking, and sudden reversing.
Chain | Connecting Links | Adding Links | Adding-and-Connecting Links | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller Chain | |||||||||||||||
Trade No. | Std. | Pitch | Roller Dia. | Roller Wd. | Working Load, lb. | Per Ft. | Each | Each | Each | ||||||
Double Pitch | |||||||||||||||
Corrosion-Resistant 304 Stainless Steel | |||||||||||||||
| C2040 | ANSI | 1" | 0.312" | 5/16" | 95 | 2335K1 | 000000 | 2335K11 | 00000 | 2335K12 | 00000 | 2335K13 | 000000 | ||
| C2050 | ANSI | 1 1/4" | 0.400" | 3/8" | 150 | 2335K2 | 00000 | 2335K21 | 0000 | 2335K22 | 0000 | 2335K23 | 00000 | ||
| C2060H | ANSI | 1 1/2" | 0.469" | 1/2" | 230 | 2335K3 | 00000 | 2335K31 | 00000 | 2335K32 | 0000 | 2335K33 | 00000 | ||
| C2080H | ANSI | 2" | 0.625" | 5/8" | 390 | 2335K4 | 00000 | 2335K41 | 00000 | 2335K42 | 00000 | 2335K43 | 00000 | ||
Floating Roller Chain Tensioners
 |
Mount these tensioners directly onto your chain drive. They have adjustable straps that take up slack and apply constant tension. Because they engage with the side plates instead of the rollers, they increase the life of your roller chain.
UHMW Polyethylene—UHMW polyethylene tensioners are stronger and more durable than PTFE tensioners.
PTFE—PTFE tensioners handle temperatures up to 450° F, more than twice as high as UHMW and titanium models.
Titanium—Titanium tensioners stand up to harsh and dirty environments. They're stronger and more durable than plastic tensioners. And with a low coefficient of friction, they work with chain that has little or no lubrication.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Roller Chain Trade No. | For Strand Type | Ht. | Wd. | Dp. | Housing Material | Strap Material | Max. Temp., ° F | Each | |||
For ANSI Chain | |||||||||||
UHMW Polyethylene | |||||||||||
| 25 | Single | 12" | 2 1/2" | 1 3/32" | 304 Stainless Steel | HDPE | 180 | 5973K1 | 000000 | ||
| 35 | Single | 12" | 2 1/2" | 1 3/32" | 304 Stainless Steel | HDPE | 180 | 5973K2 | 00000 | ||
| 40, 41, 52, 25-2 | Single, Double | 12" | 3" | 2 11/16" | 304 Stainless Steel | HDPE | 180 | 5973K3 | 00000 | ||
| 50 | Single | 12" | 3 1/2" | 2 7/8" | 304 Stainless Steel | HDPE | 180 | 5973K4 | 000000 | ||
| 60, 35-2, 40-2, 35-3 | Single, Double, Triple | 12" | 4" | 3 1/8" | 304 Stainless Steel | HDPE | 180 | 5973K5 | 000000 | ||
| 76, 100, 60-2, 40-3 | Single, Double, Triple | 16" | 5" | 4 1/16" | 304 Stainless Steel | HDPE | 180 | 5973K7 | 000000 | ||
| 80, 50-2, 35-4 | Single, Double, Quadruple | 16" | 4 1/2" | 3 3/4" | 304 Stainless Steel | HDPE | 180 | 5973K6 | 000000 | ||
| 120, 80-2, 50-3, 40-4 | Single, Double, Triple, Quadruple | 16" | 5 1/2" | 4 13/16" | 304 Stainless Steel | HDPE | 180 | 5973K8 | 000000 | ||
| 200, 100-2, 80-3, 60-4, 50-5, 40-6 | Single, Double, Triple, Quadruple, Fivefold, Sixfold | 24" | 7 1/2" | 6" | 304 Stainless Steel | HDPE | 180 | 5973K204 | 000000 | ||
PTFE | |||||||||||
| 35 | Single | 12" | 2 1/2" | 1 3/32" | 304 Stainless Steel | Galvanized Steel | 450 | 5973K211 | 000000 | ||
| 40, 41, 52, 25-2 | Single, Double | 12" | 3" | 2 11/16" | 304 Stainless Steel | Galvanized Steel | 450 | 5973K212 | 000000 | ||
| 50 | Single | 12" | 3 1/2" | 2 7/8" | 304 Stainless Steel | Galvanized Steel | 450 | 5973K213 | 000000 | ||
| 60, 35-2, 40-2, 35-3 | Single, Double, Triple | 12" | 4" | 3 1/8" | 304 Stainless Steel | Galvanized Steel | 450 | 5973K214 | 000000 | ||
Titanium | |||||||||||
| 25 | Single | 12" | 2 1/2" | 1 3/32" | 304 Stainless Steel | HDPE | 180 | 5973K224 | 000000 | ||
| 35 | Single | 12" | 2 1/2" | 1 3/32" | 304 Stainless Steel | HDPE | 180 | 5973K225 | 000000 | ||
| 40, 41, 52, 25-2 | Single, Double | 12" | 3" | 2 11/16" | 304 Stainless Steel | HDPE | 180 | 5973K226 | 000000 | ||
| 50 | Single | 12" | 3 1/2" | 2 7/8" | 304 Stainless Steel | HDPE | 180 | 5973K227 | 000000 | ||
| 60, 35-2, 40-2, 35-3 | Single, Double, Triple | 12" | 4" | 3 1/8" | 304 Stainless Steel | HDPE | 180 | 5973K228 | 000000 | ||
| 76, 100, 60-2, 40-3 | Single, Double, Triple | 16" | 5" | 4 1/16" | 304 Stainless Steel | HDPE | 180 | 5973K231 | 000000 | ||
| 80, 50-2, 35-4 | Single, Double, Quadruple | 16" | 4 1/2" | 3 3/4" | 304 Stainless Steel | HDPE | 180 | 5973K229 | 000000 | ||
| 120, 80-2, 50-3, 40-4 | Single, Double, Triple, Quadruple | 16" | 5 1/2" | 4 13/16" | 304 Stainless Steel | HDPE | 180 | 5973K232 | 000000 | ||
Dry-Running Roller Chain and Links
 |
Chain |
 |
Connecting Link |
|
Say goodbye to messy grease and time-consuming maintenance. This chain has plastic bearings that run smoothly without lubrication. Paired with stainless steel pins and side plates, it’s lightweight, quiet-running, and resistant to mild chemicals. The chain withstands starts and stops better than all-plastic chain, but it handles only a fraction of the load of all-metal chain. Like the chain on a bike, the side plates have a figure-eight shape that grips sprockets to transmit power between rotating shafts without slipping.
Connecting Link—Use a single link to join both ends of your chain. Start by removing the spring clip or cotter pin from the link’s side plate. Then, slide the link pins into the mating rollers at each end of your chain and snap the clip back on. Also known as master links.
Chain | Connecting Links | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller Chain | ||||||||||||
Trade No. | Std. | Pitch | Roller Dia. | Roller Wd. | Working Load, lb. | Lubrication | Per Ft. | Each | ||||
Single Strand | ||||||||||||
Plastic with 304 Stainless Steel Pins and Side Plates | ||||||||||||
| 25 | ANSI | 1/4" | 0.130" | 1/8" | 15 | Not Required | 6228K11 | 000000 | 6228K21 | 00000 | ||
| 35 | ANSI | 3/8" | 0.200" | 3/16" | 40 | Not Required | 6228K12 | 00000 | 6228K22 | 0000 | ||
| 40 | ANSI | 1/2" | 0.312" | 5/16" | 95 | Not Required | 6228K13 | 00000 | 6228K23 | 0000 | ||
| 50 | ANSI | 5/8" | 0.400" | 3/8" | 150 | Not Required | 6228K14 | 00000 | 6228K24 | 0000 | ||
Hollow-Pin Roller Chain and Links
 |
Chain |
 |
Connecting Links |
 |
Adding-and-Connecting Link |
|
Slide rods or other attachments straight through the rollers. With hollow pins, there’s no need to take this chain apart or add attachment links like you would with standard roller chain. Pair the chain with sprockets to transmit power between rotating shafts. It’s commonly used in conveying applications.
Lubrication is key to smooth operation and long chain life. Routinely apply oil by hand or install an oil dispenser for continuous lubrication.
Corrosion-Resistant 304 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.
Connecting Link—Use a single link to join both ends of your chain. Start by removing the spring clip or cotter pin from the link’s side plate. Then, slide the link pins into the mating rollers at each end of your chain and snap the clip back on. Also known as master links.
Adding-and-Connecting Link—An all-in-one link for adding and connecting. It adds a half-pitch length at the roller end, allowing finer length adjustments than full-pitch links. The pin end connects to your chain. Remove the side plate to install. Also known as half links and offset links.
Chain | Connecting Links | Adding-and-Connecting Links | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller Chain | ||||||||||||||
Trade No. | Std. | Pitch | Roller Dia. | Roller Wd. | Working Load, lb. | Pinhole Dia. | Per Ft. | Each | Each | |||||
Single Strand | ||||||||||||||
Corrosion-Resistant 304 Stainless Steel | ||||||||||||||
| 40 | ANSI | 1/2" | 0.312" | 5/16" | 95 | 0.157" | 2326K1 | 000000 | 2326K11 | 000000 | 2326K12 | 000000 | ||
| 50 | ANSI | 5/8" | 0.400" | 3/8" | 150 | 0.202" | 2326K2 | 000000 | 2326K13 | 00000 | 2326K14 | 00000 | ||
Ultra-Low-Profile Channel-Guided Roller Chain Tensioners
 |
Able to fit in tight spots, these tensioners are less than 3" tall. Built-in springs put constant tension on roller chain to absorb and buffer shock, reduce vibration, and improve drive performance.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Roller Chain Trade No. | Tension Force, lbf | Travel Ht. | Ht. | Wd. | Dp. | Material | Housing Material | Dia., mm | No. of | Mounting Fasteners Included | Max. Temp., ° F | Each | |||
For Single-Strand ANSI Roller Chain | |||||||||||||||
Vertical Mount/Horizontal Mount | |||||||||||||||
| 35 | 2 to 4 | 0.6" | 2 9/16" | 2" | 19/32" | Plastic | 304 Stainless Steel | 5 | 2 | No | 140 | 7332K9 | 0000000 | ||
| 35 | 13 to 19 | 0.6" | 2 9/16" | 2" | 19/32" | Plastic | 304 Stainless Steel | 5 | 2 | No | 140 | 7332K11 | 000000 | ||
Deep-Channel Roller Chain Guides
 |
Guide |
Also known as captured guides, deep-channel guides prevent chain from slipping off track. Use them to minimize friction, reduce noise, and prolong the life of your roller chain. They can be cut to the exact length you need.
Flanged Frame—Guides with flanged frame allow easy mounting. Stainless steel frames are more corrosion resistant than steel frames.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Roller Chain Trade No. | Ht. | Wd. | Channel Dp. | Mounting Fasteners Included | Mounting Hole Dia. | Max. Temp., ° F | Choose a Length, ft. | Per Ft. | |||
For Single-Strand ANSI Roller Chain | |||||||||||
Polyethylene with 304 Stainless Steel Frame | |||||||||||
| 40 | 0.94" | 1.18" | 0.55" | — | — | 175 | 1, 2, 3, 4, 5, 6, 7, 8 | 93095K45 | 000000 | ||
| 50 | 0.94" | 1.18" | 0.65" | — | — | 175 | 1, 2, 3, 4, 5, 6, 7, 8 | 93095K24 | 00000 | ||
| 60 | 1.13" | 1.18" | 0.82" | — | — | 175 | 1, 2, 3, 4, 5, 6, 7, 8 | 93095K25 | 00000 | ||
| 80 | 1.58" | 1.77" | 1.19" | — | — | 175 | 1, 2, 3, 4, 5, 6, 7, 8 | 93095K26 | 000000 | ||
Polyethylene with 304 Stainless Steel Flanged Frame | |||||||||||
| 50 | 0.98" | 2.09" | 0.64" | No | 5/16" | 175 | 1, 3, 4, 6, 8 | 93095K38 | 000000 | ||
| 60 | 0.98" | 2.09" | 0.81" | No | 5/16" | 175 | 1, 3, 4, 6, 8 | 93095K39 | 000000 | ||
