Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.

Compare the appearance choices of our 304 stainless steel with these convenient selector packs.

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

This material has tighter tolerances than standard 303 stainless steel.

440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.

This material is hardened for increased wear resistance over standard 420 stainless steel.

Precision ground on the top and bottom to a tight tolerance.

The width and thickness are oversized for finishing to your exact requirements.

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.

These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

Able to withstand temperatures up to 2100° F, 330 stainless steel is widely used as components for industrial furnaces, gas turbines, and boilers. It resists cracking when exposed to heating and cooling cycles.

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Also known as bolting grade, this wire cloth has a large percentage of open area and ultra-thin wire to maintain flow. Use to sift and sort large quantities of dense nonabrasive materials.

The welded joints keep opening sizes uniform and prevent fraying as you bend this wire cloth.

Designed for use in food, pharmaceutical, and other sanitary environments, this precision wire cloth is sintered (fused together) to create a strong, smooth surface that’s free of crevices where contaminants can collect.

Often used in sieves and vibratory shakers for testing applications, the openings of this wire cloth are woven to a tight size tolerance for accurate, consistent sifting results.

Minimize clogs of dry powdered materials in sifting and sizing applications with this wire cloth, also known as milling grade.