Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

Slide these shims under the screw head to shorten the shoulder length.

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

These spacers have excellent corrosion resistance and are passivated for enhanced protection.

The 45° end fits against an angled surface to create a flat surface for connection.

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

Slide these rings into place with one twist—no tools required—for applications with high thrust loads.

No groove required—press these rings onto the end of a shaft for a firm grip.

Also known as E-style rings.

Also known as C-style and crescent rings, these rings have a small shoulder to fit in tight spaces.

Open these rings, pass them over the end of a shaft, and release to spring into the groove.

These rings meet military specification MS 16624.

Slide these rings into place by hand with a single twist for applications with high thrust loads.

These coiled rings can be wound into place inside a bore or housing without tools.

Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.

Wind these retaining rings into a groove—no tools required for installation.