Type Type |
---|
![]() | ![]() |
Adapter | Repair Clamp |
![]() | |
Clamp |
For Use With For Use With |
---|
|
Maximum Vacuum Maximum Vacuum |
---|
|
For Pipe Material For Pipe Material |
---|
|
|
Gasket Material Gasket Material |
---|
|
Bolt Finish Bolt Finish |
---|
|
Nut Finish Nut Finish |
---|
|
Specifications Met Specifications Met |
---|
|
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Repair pinholes, punctures, and cracks in low-pressure systems with these clamps. Insert tubing into the clamp and tighten the bolts to create a secure seal. Clamps have a strip that bridges the opening between the bolts to provide complete coverage. They are 304 stainless steel for very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For Tube OD | Material | Max. Pressure | Lg. | Each | |
2" | 304 Stainless Steel | 15 psi @ 72° F | 4" | 00000000 | 000000 |
2" | 304 Stainless Steel | 15 psi @ 72° F | 6" | 00000000 | 00000 |
2" | 304 Stainless Steel | 15 psi @ 72° F | 8" | 00000000 | 00000 |
2" | 304 Stainless Steel | 15 psi @ 72° F | 12" | 00000000 | 00000 |
3" | 304 Stainless Steel | 15 psi @ 72° F | 4" | 00000000 | 00000 |
3" | 304 Stainless Steel | 15 psi @ 72° F | 6" | 00000000 | 00000 |
3" | 304 Stainless Steel | 15 psi @ 72° F | 8" | 00000000 | 00000 |
3" | 304 Stainless Steel | 15 psi @ 72° F | 12" | 00000000 | 00000 |
4" | 304 Stainless Steel | 15 psi @ 72° F | 4" | 00000000 | 00000 |
4" | 304 Stainless Steel | 15 psi @ 72° F | 6" | 00000000 | 00000 |
4" | 304 Stainless Steel | 15 psi @ 72° F | 8" | 00000000 | 00000 |
4" | 304 Stainless Steel | 15 psi @ 72° F | 12" | 00000000 | 000000 |
6" | 304 Stainless Steel | 15 psi @ 72° F | 4" | 00000000 | 00000 |
6" | 304 Stainless Steel | 15 psi @ 72° F | 6" | 00000000 | 00000 |
6" | 304 Stainless Steel | 15 psi @ 72° F | 8" | 00000000 | 000000 |
6" | 304 Stainless Steel | 15 psi @ 72° F | 12" | 00000000 | 000000 |
Use these clamps to connect vacuum tube fittings. Insert two fittings into a clamp and tighten to form a secure seal.
For technical drawings and 3-D models, click on a part number.
T-handle clamps allow you to quickly disassemble and reassemble your line without tools. They offer very good corrosion resistance.
For Tube OD | Material | Gasket Material | Max. Pressure | Max. Vacuum | Each | |
1 1/2" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 000000 |
2" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 00000 |
2 1/4" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 00000 |
2 1/2" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 00000 |
3" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 00000 |
3 1/4" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 00000 |
5" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 00000 |
6" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 00000 |
8" | 304 Stainless Steel | Gum Rubber | 15 psi @ 72° F | 15 in. of Hg @ 72° F | 0000000 | 000000 |
Repair pinholes, punctures, splits, and full-circle breaks on air and water lines with these clamps. They can also be used to add support to corroded tubing. Clamps slide over tubing, so there’s no need to disassemble your system. They are 304 stainless steel for very good corrosion resistance. They meet NSF/ANSI 61 safety standards for use with drinking water systems.
Copper tube size is the accepted designation of the copper tubing industry, not the actual OD.
For technical drawings and 3-D models, click on a part number.
Also known as no-hub couplings, these have a one-piece sleeve with a stop in the center, so you know your pipe is always aligned correctly. Tighten the bands to form a strong seal on rigid pipe of the same or different materials. Connectors are 304 stainless steel for good corrosion resistance.
Note: Copper tube size is the accepted designation of the copper tubing industry, not the actual OD.