For Minimum Panel Thickness For MinimumPanel Thickness |
|---|
|
|
For Maximum Panel Thickness For MaximumPanel Thickness |
|---|
|
|
Ring OD Ring OD |
|---|
|
|
|
Passivation Passivation |
|---|
|
Minimum Hardness Minimum Hardness |
|---|
|
About Nuts, Materials, and Finishes
More
Stainless Steel Snap-In Nuts
These nuts have good chemical resistance and may be mildly magnetic. Snap them into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Mounting legs expand to lock the fastener in place. They can be installed by hand or with pliers.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch | For Panel Thick. | Square Hole Size | Wd. | Head Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10-24 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-24 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 10-24 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-24 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-32 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 10-32 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.49" | 0.25" | 5 | 000000000 | 0000 |
| 10-32 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-32 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 1/4"-20 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 1/4"-20 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 1/4"-20 | __ | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 1/4"-20 | __ | 0.125" to 0.156" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Metric 18-8 Stainless Steel | ||||||||
| M5 | 0.8mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 1.626mm to 2.667mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 1.626mm to 2.667mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Rectangular Push Nuts
Also known as flat-style speed nuts, these have large sides, so they're easy to push over threads by hand.
18-8 stainless steel push nuts are chemical resistant.
For technical drawings and 3-D models, click on a part number.
| For Thread Size | Wd. | Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||
|---|---|---|---|---|---|
| 4-40 | 1/4" | 7/16" | 25 | 000000000 | 00000 |
Push-On External Retaining Rings
No groove required—press these rings onto the end of a shaft. Use them on unhardened shafts that are softer than the push ring. The ring bites into the metal to form an interference grip. Styles A, B, and C have teeth that dig into the shaft material, so expect minor scratching. Use a push nut installation tool (sold separately) to install rings, or install them manually.
18-8 stainless steel rings have good corrosion resistance. A passivated finish adds protection against corrosion.
15-7 PH stainless steel rings have high strength with good corrosion resistance. Rings are passivated for added protection against corrosion.
For technical drawings and 3-D models, click on a part number.
Ring | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For OD | OD | Thick. | Ht. | Min. Installation Dp. | Passivation | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||
| D | 3/32" | 7/32" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 00000 |
| D | 1/8" | 7/32" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 1/8" | 1/4" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 1/8" | 21/64" | __ | 1/32" | __ | Passivated | Rockwell C27 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 5/32" | 17/64" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 3/16" | 5/16" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 3/16" | 21/64" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 3/16" | 3/8" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 1/4" | 5/16" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 0000 |
| D | 1/4" | 7/16" | __ | 1/16" | __ | Not Passivated | Rockwell C27 | May Be Mildly Magnetic | 50 | 000000000 | 00000 |
| D | 5/16" | 7/16" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 00000 |
| D | 3/8" | 5/8" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 00000 |
| D | 7/16" | 37/64" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 00000 |
| D | 1/2" | 3/4" | __ | 1/32" | __ | Not Passivated | Rockwell C30 | May Be Mildly Magnetic | 50 | 000000000 | 00000 |
15-7 PH Stainless Steel | |||||||||||
| A | 3/32" | 21/64" | 0.01" | 1/32" | 0.058" | Passivated | Not Rated | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 1/8" | 3/8" | 0.01" | 1/32" | 0.058" | Passivated | Not Rated | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 5/32" | 13/32" | 0.01" | 1/32" | 0.058" | Passivated | Not Rated | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 3/16" | 29/64" | 0.01" | 1/32" | 0.062" | Passivated | Not Rated | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 1/4" | 17/32" | 0.01" | 1/32" | 0.074" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 5/16" | 19/32" | 0.01" | 1/32" | 0.074" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 3/8" | 21/32" | 0.01" | 1/32" | 0.074" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 7/16" | 3/4" | 0.015" | 3/64" | 0.09" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 1/2" | 53/64" | 0.015" | 3/64" | 0.108" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 9/16" | 57/64" | 0.015" | 3/64" | 0.108" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 5/8" | 61/64" | 0.015" | 3/64" | 0.108" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| A | 3/4" | 1 5/64" | 0.015" | 3/64" | 0.108" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| A | 7/8" | 1 13/64" | 0.015" | 3/64" | 0.108" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| A | 1" | 1 21/64" | 0.015" | 3/64" | 0.108" | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
Push-On Retaining Caps
Use these caps to hold components in place and protect shaft ends. Install these caps with a hammer or push them into place by hand.
For technical drawings and 3-D models, click on a part number.
| For OD | OD | Ht. | Insert Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
400 Series Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8" | 27/64" | 1/8" | 18-8 Stainless Steel | Rockwell C49 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 3/16" | 1/2" | 5/32" | 18-8 Stainless Steel | Rockwell C49 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| 1/4" | 41/64" | 13/64" | 18-8 Stainless Steel | Rockwell C49 | May Be Mildly Magnetic | 10 | 000000000 | 0000 |
| 5/16" | 41/64" | 13/64" | 18-8 Stainless Steel | Rockwell C49 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| 3/8" | 25/32" | 15/64" | 18-8 Stainless Steel | Rockwell C49 | May Be Mildly Magnetic | 10 | 000000000 | 0000 |
| 1/2" | 1 1/32" | 19/64" | 18-8 Stainless Steel | Rockwell C49 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |