Stainless Steel Strapping

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Minimum Clamp ID Minimum Clamp ID

2.5 mm

	Maximum Temperature Maximum Temperature

	Thread Size Thread Size

	Capacity Capacity

	Mount Type Mount Type

2,523 Products

Load Securing and Stabilizing

Load-Rated Sew-On Buckles for Webbing

Permanently sew webbing onto these buckles.

Sew-On Hooks for Webbing

Permanently sew webbing onto these hooks.

Hooks for Rope

The base of these hooks grip rope.

Load-Rated Slides for Webbing

These slides are rated for heavy duty applications.

Snap-In Load-Securing Plates

Use these plates where full lengths of track won't fit to create one anchor point.

Webbing Guides

Also known as footman's loops, use these guides to prevent webbing from twisting, or as anchor points in tie-down applications.

Webbing Anchor Plates

Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.

Hooks for Elastic Cord

Attach these hooks to elastic cord to make a tie down.

Bundling

Stainless Steel Hook and Loop Cable Ties

Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.

Stainless Steel Cable Ties

For use in the harshest environments, these ties withstand chemicals and UV rays.

Plastic-Coated Stainless Steel Cable Ties

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

Expandable Stainless Steel Cable Ties

The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.

Choose-a-Color Plastic-Coated
Stainless Steel Cable Ties

Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.

Stainless Steel Cable Tie Mounts

Use these mounts with stainless steel cable ties when working in corrosive environments.

Double-Loop Twist Ties

These ties have a loop on each end that can be twisted around each other for a secure closure.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Cut-to-Length Routing Clamps

Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Adjustable Standoff Clamps

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

Riser Clamps

Support vertical pipes passing through floors.

Hangers for Pipe, Tube, and Conduit

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

U-Bolts

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Beam Clamps

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

Beam Clamps for Threaded Rod

Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Center-Mount Beam Clamps for Threaded Rod

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.

Routing Ringbolts

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Metal Strapping, Tensioners, and Sealers

Metal Strapping

This metal strapping is the standard for packaging and shipping applications.

Light Duty Metal Strapping

Use this metal strapping for securing pipe coverings as well as for packaging.

Buckles for Light Duty Metal Strapping

Use these buckles to secure Light Duty Metal Strapping around pipe or packages.

Seals for Metal Strapping

Use a sealer to crimp these seals onto metal strapping to keep it under tension.

Tensioners for Metal Strapping

Use these tensioners to draw metal strapping tight around packages.

High-Tension Tensioners for Metal Strapping

These tensioners apply maximum tension to pull strapping more tightly around packages than standard tensioners for metal strapping.

Sealers for Metal Strapping

Also known as crimpers, sealers secure seals onto metal strapping.

Combination Tensioner/Sealers for Metal Strapping

These tools do double duty, pulling metal strapping tight and then sealing it, without the use of a separate seal.

Mobile Dispenser Kits

Roll these dispensers wherever you need them. They come with tools to tension and seal strapping around pallet loads, crates, and packages.

Lift Attachments

Chain Slings with Latching Hooks

Latching hooks allow you to quickly release a load.

Wire Rope Slings

These slings are more abrasion and cut resistant than web and round slings, yet lighter in weight than mesh and chain slings.

Drum Slings

These two-leg slings stack steel drums vertically and horizontally.

General Purpose Clamps for Firm Hose and Tube

General Purpose Bolt Clamps for Firm Hose

One clamp fits a wide range of diameters, so you can always have the right size on hand.

Build-Your-Own Worm-Drive
Clamps for Firm Hose and Tube

Here's everything you need to make your own 3" diameter and larger custom-length worm-drive clamps.

General Purpose Worm-Drive
Clamps for Firm Hose and Tube

Clamps have a slotted screw. Tighten with a slotted screwdriver, hex nut driver, or a wrench.

General Purpose Worm-Drive Clamp
Assortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Nonslip Screw for Firm Hose and Tube

A raised safety collar around the head of the screw prevents your screwdriver from slipping and damaging the hose or tube.

General Purpose Worm-Drive Clamps with
Thumb Screw for Firm Hose and Tube

A thumb screw instead of a slotted screw allows you to install these clamps without any tools.

Low-Profile Band Clamps for Firm Hose

Banding for Build-Your-Own
Low-Profile Band Clamps for Firm Hose

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

Buckles for Build-Your-Own Low-Profile
Band Clamps for Firm Hose

Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.

Low-Profile Band Clamps for Firm Hose

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Extra-Strength Low-Profile Band Clamps for Firm Hose

The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.

Tight-Seal Bolt Clamps for Firm Hose and Tube

These clamps form a 360° seal around your hose or tube to prevent leaks.

Vibration-Resistant Clamps for Firm Hose and Tube

Tight-Seal Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.

Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Vibration-Resistant Pinch Clamp
Assortments for Firm Hose and Tube

These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Vibration-Resistant Worm-Drive
Clamps for Firm Hose and Tube

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Constant-Tension Bolt Clamps for Firm Hose and Tube

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

Quick-Release Clamps for Firm Hose and Tube

Clamps have a slotted hex-head screw that flips up to release the band for quick opening.

Clamps for Soft Hose and Tube

Build-Your-Own Worm-Drive
Clamps for Soft Hose and Tube

Create 2" diameter and larger smooth-band worm-drive clamps.

High-Temperature Build-Your-Own
Worm-Drive Clamps for Soft Hose and Tube

Create 4" diameter and larger worm-drive clamps that withstand high-temperature applications.

Worm-Drive Clamps with Smooth
Bands for Soft Hose and Tube

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.

Worm-Drive Smooth-Band Clamp
Assortments for Soft Hose and Tube

Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges.

Worm-Drive Clamps for Soft Hose and Tube

An extended tail acts as a liner to protect soft hose and tube from being cut by the slots in the band.

Tight-Seal Bolt Clamps for Soft Hose and Tube

The bolt design provides high strength and creates a 360° seal to prevent leaks.

Tight-Seal Easy-Install Bolt
Clamps for Soft Hose and Tube

Remove the bolt and flip open the hinged bridge to install.

Constant-Tension Clamps for Soft Hose and Tube

Don't worry about your hose and tube expanding and contracting when temperatures fluctuate—these clamps have a Bellville spring that automatically increases and decreases the clamp's diameter.

Quick-Release Clamps for Soft Hose and Tube

These clamps have rounded edges and a smooth interior, so they won’t cut into soft hose and tube materials such as silicone. Flip up the slotted hex head screw to quickly release the band.

Vibration-Resistant Pinch
Clamps for Soft Hose and Tube

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Duct Hose Clamps

Work-Load-Rated Quick-Release Duct Hose Clamps

Unlike other duct hose clamps, these are rated for a maximum work load. Clamps have a quick-release latch that lets you access your line frequently while maintaining your original clamp size.

Duct Hose Clamps for Spiral Duct

Also known as bridge clamps, these worm-drive clamps align with the spiral support on wire duct hose to provide a tight seal.

Stainless Steel Hook and Loop

Woven from Nomex and flexible stainless steel yarn, this hook and loop withstands temperatures up to 800° F.

Personal Harnesses and Lanyards

Wire Rope Fall-Arrest Anchor Points

Stationary I-Beam Fall-Arrest Anchor Points

Mount this anchor to vertical and horizontal I-beams.

Quick-Stop Fall-Arrest Lanyards

A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches.

D-Rings—Not for Lifting

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Tag Ties

Wrap these ties through tags.

Cylinder Racks

Wall-Mount Cylinder Racks

Bench-Mount Cylinder Racks

Pipe Insulation Banding

Save installation time with banding that’s ready to use. It has an easy-to-close fastener on one end.

Load Securing and Stabilizing

Load-Rated Sew-On Buckles for Webbing

Sew-On Hooks for Webbing

Hooks for Rope

Load-Rated Slides for Webbing

Snap-In Load-Securing Plates

Webbing Guides

Webbing Anchor Plates

Hooks for Elastic Cord

Bundling

Stainless Steel Hook and Loop Cable Ties

Stainless Steel Cable Ties

Plastic-Coated Stainless Steel Cable Ties

Expandable Stainless Steel Cable Ties

Choose-a-Color Plastic-CoatedStainless Steel Cable Ties

Stainless Steel Cable Tie Mounts

Double-Loop Twist Ties

Routing Clamps

Routing Clamps

Strut-Mount Metal Routing Clamps

Vibration-Damping Routing Clamps

Strut-Mount Vibration-Damping Routing Clamps

Rails for Rail-Mount Vibration-Damping Routing Clamps

Cut-to-Length Routing Clamps

Snug-Fit Vibration-Damping Loop Clamps

Vibration-Damping Loop Clamps

Multiline Vibration-Damping Loop Clamps

Loop Clamps

Adjustable Standoff Clamps

Riser Clamps

Hangers for Pipe, Tube, and Conduit

Strap Hangers

Pivoting Threaded-Rod-Mount Loop Hangers

Stainless Steel Threaded-Rod-Mount Loop Hangers

Side-Load Threaded-Rod-Mount Loop Hangers

Threaded-Rod-Mount Clamping Hangers

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Stackable Threaded-Rod-Mount Clamping Hangers

Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Washdown Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Weld-Mount Clamping Hangers

U-Bolts

U-Bolt Mounting Plates

U-Bolts with Mounting Plates

U-Bolts

Clamping U-Bolts

Square U-Bolts

Rubber-Cushioned U-Bolts

Rubber-Cushioned Square U-Bolts

Vibration-Damping U-Bolts

Beam Clamps

Beam Clamps for Pipe, Tube, and Conduit

Beam Clamps for Threaded Rod

Center-Mount Beam Clamps for Threaded Rod

Beam Clamps for Strut Channel

Routing Ringbolts

Routing Ringbolts

Metal Strapping, Tensioners, and Sealers

Metal Strapping

Light Duty Metal Strapping

Buckles for Light Duty Metal Strapping

Seals for Metal Strapping

Tensioners for Metal Strapping

High-Tension Tensioners for Metal Strapping

Sealers for Metal Strapping

Combination Tensioner/Sealers for Metal Strapping

Mobile Dispenser Kits

Mobile Dispenser Kits

Lift Attachments

Chain Slings with Latching Hooks

Wire Rope Slings

Drum Slings

General Purpose Clamps for Firm Hose and Tube

General Purpose Bolt Clamps for Firm Hose

Build-Your-Own Worm-DriveClamps for Firm Hose and Tube

General Purpose Worm-DriveClamps for Firm Hose and Tube

General Purpose Worm-Drive ClampAssortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps withNonslip Screw for Firm Hose and Tube

General Purpose Worm-Drive Clamps withThumb Screw for Firm Hose and Tube

Low-Profile Band Clamps for Firm Hose

Choose-a-Color Plastic-Coated
Stainless Steel Cable Ties

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Build-Your-Own Worm-Drive
Clamps for Firm Hose and Tube

General Purpose Worm-Drive
Clamps for Firm Hose and Tube

General Purpose Worm-Drive Clamp
Assortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Nonslip Screw for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Thumb Screw for Firm Hose and Tube

Banding for Build-Your-Own
Low-Profile Band Clamps for Firm Hose

Buckles for Build-Your-Own Low-Profile
Band Clamps for Firm Hose

Tight-Seal Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Vibration-Resistant Pinch Clamp
Assortments for Firm Hose and Tube

Vibration-Resistant Worm-Drive
Clamps for Firm Hose and Tube

Build-Your-Own Worm-Drive
Clamps for Soft Hose and Tube

High-Temperature Build-Your-Own
Worm-Drive Clamps for Soft Hose and Tube

Worm-Drive Clamps with Smooth
Bands for Soft Hose and Tube

Worm-Drive Smooth-Band Clamp
Assortments for Soft Hose and Tube

Tight-Seal Easy-Install Bolt
Clamps for Soft Hose and Tube

Vibration-Resistant Pinch
Clamps for Soft Hose and Tube