Stainless Steel Taper Drive Pins

Filter by

Material

Pin Material

System of Measurement

Length

Diameter

Pin Type

End Shape

Fastener Head Type

Shaft Type

Large End Diameter

Small End Diameter

End Type

Passivation

Minimum Hardness

Taper Pin Number

Tolerance Rating

REACH Compliance

Breaking Strength

RoHS Compliance

Specifications Met

Thread Size

DFARS Compliance

Rate of Taper

Forward

How can we improve?

2,429 Products

Fasteners

Taper Pins

To remove these pins, hit the small end with a punch to drive the pin out.

Threaded Taper Pins

Threads on these pins stick out for easy removal from blind holes. Tighten the hex nut to draw the pin out.

Dowel Pins

Use these metal dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts.

Oversized Dowel Pins

Oversized to fit worn and enlarged holes, these pins work well as repair and replacement parts.

Undersized Dowel Pins

Slip these pins in and out during maintenance or prototyping—they’re undersized to make alignment easier.

Dowel Pin Stock

Cut this 12" stock to the length you need.

Full-Groove Dowel Pins

Grooves run the full length of these pins for a firm hold that won't spin. Use them in place of standard dowel, spring, and taper pins to fasten parts. Also known as type A pins.

Flat-Vent Pull-Out Dowel Pins

The flat side of these pins relieves trapped air, making them easier to insert in and remove from blind holes. To remove, thread a screw or tool into the tapped hole, then pull the pin out.

Pull-Out Dowel Pins

To remove these pins, thread a screw or tool into the tapped hole, then pull them out.

Spiral-Vent Pull-Out Dowel Pins

A spiral groove cut into these pins relieves trapped air but stays in 360° contact with the hole for a secure fit that's easy to insert in and remove from blind holes. To remove, thread a screw or tool into the tapped hole, then pull the pin out.

Flat-Head Made-to-Order Pins

Create a custom headed pin with your choice of material, dimensions, and end type.

Made-to-Order Pins

Choose a material, head type, end type, and size to create a custom pin.

Screw Nails for Metal, Plastic, and Plywood

Also known as round-head Type U drive screws.

Zinc Alloy Removable Pin-Drive
Anchors for Block and Brick

Also known as drive rivets, install these anchors by hammering the pin into the body. Pry out the pin to remove.

Stainless Steel Drive Anchors for Concrete

These 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Dowel Pin Assortments

Dowel pins are commonly used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. They're slightly oversized for a tight fit.