These spacers have excellent corrosion resistance and are passivated for enhanced protection.

The 45° end fits against an angled surface to create a flat surface for connection.

Once the end is clinched in place, panels with keyholes easily slide on and off these supports.

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

SAE washers generally have a smaller ID and OD than USS washers.

Also known as Type B washers, these distribute your fastener's load over a larger surface area than other washers to minimize damage to soft materials.

Square washers fit into slots and channels and have flat sides to keep them from rotating.

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Use on clamps with open arms to keep the holding screw in place.

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Choose these washers for their adherence to strict military standards for material and construction.

Choose these washers for their adherence to strict military standards for material and construction.

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Able to withstand pressure greater than 3,000 psi, these one-piece bonded washers create the tightest seals.

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Slide these shims under the screw head to shorten the shoulder length.

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.

SAE washers generally have a smaller ID and OD than USS washers.