Character Type Character Type | Show |
|---|
|
Character Type Character Type | Hide |
|---|
|
For Maximum Surface Hardness For MaximumSurface Hardness |
|---|
|
Component Component |
|---|
|
Notch-to-End Length Notch-to-End Length |
|---|
|
Character Character |
|---|
|
Ink Included Ink Included |
|---|
|
Self Inking Self Inking |
|---|
|
About Character Height
When you look at the face of a stamp, you'll notice the character is raised. The distance between the upper and lower raised ridges is known as the character height. This height is used to measure stamp size. If a stamp does not have a size marking on the shank, measure the character height to order the correct size.
The actual impression a stamp makes is larger than its character height and varies depending upon how hard you strike the stamp, the hardness of the material, and wear.
Metal Stamps
Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.
Choose from 0-9, A-Z, period, dash, and &.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Choose a Character | Each | |
| 1/16" | 2 3/8" | 1/4" | 1/4" | Rockwell C30 | Steel | 0000000 | 00000 | |
| 3/32" | 2 3/8" | 1/4" | 1/4" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 1/8" | 2 3/8" | 1/4" | 1/4" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 5/32" | 2 7/16" | 5/16" | 5/16" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 3/16" | 2 3/8" | 5/16" | 5/16" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 1/4" | 2 5/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 5/16" | 2 3/4" | 1/2" | 1/2" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 3/8" | 2 7/8" | 1/2" | 1/2" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 1/2" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 0000000 | 0000 | |
Thick-Shank Metal Stamps
The thick shank provides more control and consistent marks than our standard metal stamps. Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.
Choose from 0-9, A-Z, period, dash, and &.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Choose a Character | Each | |
| 1/32" | 2 3/8" | 1/4" | 1/4" | Rockwell C30 | Steel | 0000000 | 00000 | |
| 3/64" | 2 3/8" | 1/4" | 1/4" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 1/16" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 3/32" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 5/32" | 2 3/4" | 3/8" | 3/8" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 3/16" | 2 3/4" | 3/8" | 3/8" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 1/4" | 3" | 7/16" | 7/16" | Rockwell C30 | Steel | 000000 | 0000 | |
| 5/16" | 3 1/8" | 9/16" | 9/16" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 3/8" | 3 1/8" | 9/16" | 9/16" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 1/2" | 3 3/4" | 3/4" | 3/4" | Rockwell C30 | Steel | 0000000 | 0000 | |
| 5/8" | 3 3/4" | 3/4" | 3/4" | Rockwell C30 | Steel | 0000000 | 00000 | |
| 3/4" | 3 3/4" | 7/8" | 7/8" | Rockwell C30 | Steel | 00000000 | 00000 | |
| 1" | 4 1/2" | 1 1/4" | 1 1/4" | Rockwell C30 | Steel | 00000000 | 00000 | |
Corrosion-Resistant Metal Stamps
Made from 440C stainless steel, these stamps won't rust and flake with exposure to moisture and chemicals. They're strong enough to make marks on surfaces with a Rockwell hardness up to C50, including other stainless steels and heat-treated steel. Stamps can be sanitized in an autoclave.
Choose from 0-9, A-Z, period, dash, @, and &.
Gentle-Mark Metal Stamps
The rounded faces on these stamps put less stress on surfaces and minimize fractures that can weaken or damage metal. Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.
Choose from 0-9, A-Z, and &.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Character | Each | |
| 1/16" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 00000 |
| 3/32" | 2 3/4" | 5/16" | 5/16" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 1/8" | 2 3/4" | 3/8" | 3/8" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 3/16" | 2 3/4" | 7/16" | 7/16" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 1/2" | 4" | 3/4" | 3/4" | Rockwell C30 | Steel | Ampersand (&) | 00000000 | 00000 |
Extra-Gentle-Mark Metal Stamps for Hard Materials
Make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel. The dotted, rounded faces on these stamps put the least amount of stress on surfaces when compared to other steel stamps, minimizing fractures that can weaken or damage metal.
Choose from 0-9, A-Z, and &.
Extra-Gentle-Mark Metal Stamps
Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. The dotted, rounded faces on these stamps put the least amount of stress on surfaces when compared to other steel stamps, minimizing fractures that can weaken or damage metal.
Choose from 0-9, A-Z, and &.
Raised-Character Metal Stamps
Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front. Works well on casting molds and in high temperature applications where the lacquer used with recessed characters would melt.
Choose from 0-9, A-Z, and &.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Character | Each | |
| 1/16" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 00000 |
| 3/32" | 2 3/4" | 5/16" | 5/16" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 1/8" | 2 3/4" | 3/8" | 3/8" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 5/32" | 2 3/4" | 7/16" | 7/16" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 3/16" | 2 3/4" | 7/16" | 7/16" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 3/8" | 3 1/8" | 5/8" | 5/8" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 0000 |
| 1/2" | 4" | 3/4" | 3/4" | Rockwell C30 | Steel | Ampersand (&) | 0000000 | 00000 |
Build-Your-Own Metal Type Stamps
Choose only the characters you need to make your message from 0-9, A-Z, period, forward slash (/), dash, and blank spaces. To create your message, place characters in the holder and then tighten with the included hex key. The spring pin locks them in place for proper alignment. For holder to work properly, you must fill unused spaces with blanks. These stamps make marks on surfaces with a Rockwell hardness up to C28, including leather, wood, and most metals.
Characters (sold separately) come individually or as sets. If ordering replacement or additional characters, make sure the character height and notch-to-end length match that of characters you already have.
Rubber Stamps with Changeable Snap-Together Message
Snap characters together to create your message. Characters can be combined to read horizontally or vertically and on as many lines as you need.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Self Inking | Ink Included | Includes | Each | |
Arrow | ||||||||
| 5/16" | 2 3/8" | 1/2" | 1/2" | No | No | Five each of Arrow | 00000000 | 00000 |
Comma (,) | ||||||||
| 1/8" | 2 3/8" | 5/16" | 5/16" | No | No | Five each of Comma (,) | 00000000 | 0000 |
Dollar Sign ($) | ||||||||
| 1/8" | 2 3/8" | 5/16" | 5/16" | No | No | Five each of Dollar Sign ($) | 00000000 | 0000 |
| 3/16" | 2 3/8" | 3/8" | 3/8" | No | No | Five each of Dollar Sign ($) | 00000000 | 0000 |
| 5/16" | 2 3/8" | 1/2" | 1/2" | No | No | Five each of Dollar Sign ($) | 00000000 | 0000 |
Forward Slash (/) | ||||||||
| 1/8" | 2 3/8" | 5/16" | 5/16" | No | No | Five each of Forward Slash (/) | 00000000 | 0000 |
| 3/16" | 2 3/8" | 3/8" | 3/8" | No | No | Five each of Forward Slash (/) | 00000000 | 0000 |
Hyphen (-) | ||||||||
| 1/8" | 2 3/8" | 5/16" | 5/16" | No | No | Five each of Hyphen (-) | 0000000 | 0000 |
| 3/16" | 2 3/8" | 3/8" | 3/8" | No | No | Five each of Hyphen (-) | 0000000 | 0000 |
Period (.) | ||||||||
| 1/8" | 2 3/8" | 5/16" | 5/16" | No | No | Five each of Period (.) | 00000000 | 0000 |
Pound Sign (#) | ||||||||
| 1/8" | 2 3/8" | 5/16" | 5/16" | No | No | Five each of Pound Sign (#) | 000000 | 0000 |
| 3/16" | 2 3/8" | 3/8" | 3/8" | No | No | Five each of Pound Sign (#) | 00000000 | 0000 |
| 5/16" | 2 3/8" | 1/2" | 1/2" | No | No | Five each of Pound Sign (#) | 00000000 | 0000 |
T-Slotted Framing Structural Brackets
