Dovetail Stands | McMaster-Carr

Filter by

Display Type

Dial

Digital

System of Measurement

Measuring Increments

Dial Indicator Type

Arm Type

Base Mount Type

Manufacturer

Distance Measured

Dial Reading

Mounting Stem Diameter

Arm Length

Dial Face Color

Orientation

Dial Diameter

Dial Hand Direction

Base Length

Base Type

Material

Manufacturer Model Number

Bearing Type

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Contact Point Length

97 Products

Flexible-Arm Magnetic-Base Variance Indicator Holders


With V-Grooved Base	With V-Grooved Base and Fine-Adjustment Clamp

Adjust the flexible arm to nearly any position. These holders have a ball-and-socket segmented arm that locks in place with a lever. The magnetic base has a release switch for easy setups.

Fine-Adjustment Clamp—Holders with fine-adjustment base or clamp give you more precise control over positioning.

V-Grooved Base—Holders with V-grooved base can be mounted on both curved and flat surfaces.

	Variance Indicator Holders													Replacement Arms
		Base							Arm
	For Mounting Stem Dia.	Type	Lg.	Wd.	Ht.	Thread Size	Material	Magnetic Pull, lbf	Lg.	Dia.	Type		Each		Each
Dovetail and Stem Mount







				Magnetic-Release Switch

				3/8"	V-Grooved	2 1/2"	2"	2 1/8"	M8 x 1.25 mm	Steel	125	12"	0.625"	Flexible	00000000	000000	00000000	000000




						Fine-Adjustment Clamp, Magnetic-Release Switch

						3/8"	V-Grooved	2"	2 1/2"	2 5/8"	5/16"-18	Steel	90	15 1/4"	0.625"	Flexible	00000000	000000	00000000	00000

Jointed-Arm Vacuum-Base Variance Indicator Holders

Position the arm by adjusting joints at the top, middle, and bottom. A vacuum base provides stability on granite plates and other nonmagnetic surfaces. Use the fine-adjustment knob on the clamp for precise positioning.

		Base					Arm
	For Mounting Stem Dia.	Type	Ht.	Dia	Thread Size	Material	Lg.	Dia.	Type		Each
Dovetail and Stem Mount







				Fine-Adjustment Clamp

				8 mm, 6 mm, 3/8"	Flat	13/16"	3 7/16"	M8 x 1.25 mm	Cast Aluminum	11 1/8"	0.705"	Jointed	0000000	0000000

Economy Dial Lever Variance Indicators with Rigid-Arm Magnetic-Base Holder

Place the magnetic base on metal surfaces for a solid mount. It has a V-grooved bottom for mounting on flat and curved surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.

Also known as a test indicator, the indicator has a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. It has jeweled bearings for high sensitivity, wear resistance, and a long service life. Rotate the dial face for viewing at multiple angles.

Horizontal Orientation


	Side View

						Dial		Contact Point			Base			Upright Post
	Distance Measured	Measuring Increments	Accuracy	Indicator Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Dia.	Lg.	Swivel Angle	Lg.	Wd.	Magnetic Pull, lbf	Dia.	Ht.	Arm Type	Includes		Each
Dovetail Mount, Stem Mount







				Jeweled Bearing

				0" to 0.03"	0.0005"	±0.0004"	5/32", 3/8"	2	1 9/32"	0-15-0	0.078"	1/2"	180°	2 1/2"	2"	132	7/16"	6.9"	Rigid	5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment	0000000	000000

Economy Dial Lever Variance Indicators with Jointed-Arm Magnetic-Base Holder

Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob on the holder’s clamp for precise positioning of the indicator.

Horizontal Orientation


	Side View

						Dial		Contact Point			Base
	Distance Measured	Measuring Increments	Accuracy	Indicator Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Dia.	Lg.	Swivel Angle	Lg.	Wd.	Magnetic Pull, lbf	Arm Type	Includes		Each
Dovetail Mount, Stem Mount







				Jeweled Bearing

				0" to 0.03"	0.0005"	±0.0004"	5/32", 3/8"	2	1 9/32"	0-15-0	0.078"	1/2"	210°	1 3/16"	1 5/32"	70	Jointed	5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment	0000000	000000


				0" to 0.03"	0.0005"	±0.0004"	5/32", 3/8"	2	1 9/32"	0-15-0	0.078"	1/2"	180°	2 1/2"	2"	132	Jointed	5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment	0000000	000000

Economy Flexible-Arm Weighted-Base Variance Indicator Holders

With Granite Base

Adjust the flexible ball-and-socket segmented arm to nearly any position and lock in place. A heavy base adds stability.

Granite—Holders with a granite base have an extremely tight flatness tolerance. Their flatness gives you an accurate reference for inspection work and lets you move workpieces in and out smoothly. These holders have a fine-adjustment clamp to position indicators at precise angles.

		Base						Upright Post		Arm
	For Mounting Stem Dia.	Type	Lg.	Wd.	Ht.	Thread Size	Material	Dia.	Ht.	Lg.	Dia.	Type		Each
Dovetail and Stem Mount







				Fine-Adjustment Clamp

				5/8"	Flat	9"	12"	2"	5/16"-24	Granite	5/8"	12"	12"	0.625"	Flexible	0000000	0000000


				5/8"	Flat	12"	18"	3"	5/16"-24	Granite	5/8"	12"	15"	0.625"	Flexible	0000000	000000

Jointed-Arm Magnetic-Base Variance Indicator Holders


With Fine-Adjustment Clamp	With Fine-Adjustment Clamp and Base

Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups. Holders have fine-adjustment knobs for precise positioning.

	Variance Indicator Holders														Replacement Arms		Replacement Clamps
		Base							Arm
	For Mounting Stem Dia.	Type	Lg.	Wd.	Ht.	Thread Size	Material	Magnetic Pull, lbf	Lg.	Dia.	Type	Includes		Each		Each		Each
Dovetail and Stem Mount







				Fine-Adjustment Base, Fine-Adjustment Clamp, Magnetic-Release Switch

				8 mm, 6 mm, 3/8"	V-Grooved	1 1/2"	1 1/4"	1 3/8"	M5 x 0.8 mm	Cast Iron	70	4 1/4"	3/8"	Jointed	Swivel Clamp	00000000	0000000	00000000	000000	00000000	000000


				8 mm, 6 mm, 3/8"	V-Grooved	2 3/8"	1 15/16"	2 5/32"	M8 x 1.25 mm	Cast Iron	176	11"	1/2"	Jointed	Swivel Clamp	00000000	000000	00000000	000000	00000000	00000




						Fine-Adjustment Clamp, Magnetic-Release Switch

						8 mm, 6 mm, 3/8"	V-Grooved	4 3/4"	1 15/16"	2 5/32"	M10 x 1.25 mm	Cast Iron	290	20"	3/4"	Jointed	Swivel Clamp	00000000	000000	00000000	000000	00000000	00000

Workpiece-Centering Variance Indicator Holders

Mount this holder into your machine spindle and use for centering workpieces. The clamp has a fine-adjustment knob for precise positioning.

		Arm			Shank
	For Mounting Stem Dia.	Lg.	Dia.	Type	Lg.	Dia.	Material		Each
Dovetail and Stem Mount







				Fine-Adjustment Clamp

				8 mm, 6 mm, 3/8"	7"	3/8"	Jointed	1 9/16"	5/16"	Steel	0000000	000000

Clamp-On Variance Indicator Holders for Bridgeport J Heads

Attach the C-clamp on this holder to your Bridgeport J head to take indicator measurements without obstructing the cutting tool. Use the fine-adjustment rod to precisely position the arm.

Overall reach is the distance from the center of the C-clamp to the end of the arm when both are extended.

	Overall Reach	Rod Lg.	Material		Each
Dovetail and Stem Mount







	Fine-Adjustment Rod

	5/32"	C	1 5/8" to 1 7/8"	7 7/16"	4"	Steel	00000000	0000000

Replacement Variance Indicator Holder Rods

		Each
4" Replacement Rod	00000000	000000

Economy Jointed-Arm Magnetic-Base Variance Indicator Holders

V-Grooved Base

Position the arm by adjusting joints at the top and middle. Use the fine adjustment knob for precise positioning.

V-Grooved Base—Holders with a V-grooved base can be mounted on both curved and flat metal surfaces. They have an additional joint at the bottom.

		Base							Arm
	For Mounting Stem Dia.	Type	Lg.	Wd.	Ht.	Thread Size	Material	Magnetic Pull, lbf	Lg.	Dia.	Type		Each
Dovetail and Stem Mount







				Fine-Adjustment Clamp, Magnetic-Release Switch

				3/8"	V-Grooved	2 1/2"	2"	2 3/16"	M8 x 1.25 mm	Cast Iron	132	13 1/2"	0.464"	Jointed	000000	000000

Economy Jointed-Arm Weighted-Base Variance Indicator Holders

Stabilize and precisely position your indicator with these weighted bases. Attached to the base, these holders have a jointed arm for moving your indicator up and down and in and out. Tighten the knob on the arm to lock it in place and use the fine-adjustment clamp for angling your indicator just right. Made of granite, the base has an extremely tight flatness tolerance, so it creates an accurate reference point for inspection work. It also means you can easily slide your workpiece in and out.

		Base						Arm
	For Mounting Stem Dia.	Type	Lg.	Wd.	Ht.	Thread Size	Material	Lg.	Dia.	Type	Granite Base Flatness Tolerance		Each
Dovetail and Stem Mount







				Fine-Adjustment Arm, Fine-Adjustment Clamp

				8 mm, 3/8"	Flat	12"	9"	2"	5/16"-18	Granite	12 1/2"	0.495"	Jointed	-0.00015" to 0.00015"	0000000	0000000


				8 mm, 3/8"	Flat	18"	12"	3"	5/16"-18	Granite	14"	0.495"	Jointed	-0.00015" to 0.00015"	0000000	000000

Electronic Lever Variance Indicators


	Side View

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface. Rotate the dial face for viewing at multiple angles. They have selectable measurement increments and can be displayed as digits or in a bar graph. Transmit measurement data to any Bluetooth-enabled device without being tethered by a cable. These indicators are rated IP65 for protection against dust and spraying water or coolant.

	Distance Measured		Display Reading		Measuring Increments		Accuracy				Contact Point
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Inch	Metric	No. of Dovetail Mounts	Dial Dia.	Dia.	Lg.	Mounting Thread Size	Swivel Angle	Batteries Included	SPC Data Output		Each
Dovetail Mount—IP65



		0" to 0.03"	0 to 0.8	0-40-0	0-1-0	0.00005", 0.0005"	0.001 0.01	±0.0004"	±0.01 mm	1	1 1/2"	0.08"	1/2"	M1.4	270°	Yes	Yes	0000000	0000000


		0" to 0.08"	0 to 2	0-40-0	0-1-0	0.00005", 0.0005"	0.001 0.01	±0.0004"	±0.01 mm	1	1 1/2"	0.08"	1 7/16"	M1.4	270°	Yes	Yes	0000000	000000

Batteries

			Pkg.
Replacement Battery for 543-702B, 543-712, 543-712B, and 543-722B Models (1 per Pkg.)	1	0000000	00000	00000	00000

Mitutoyo Dial Lever Variance Indicators


	Side View	Inch and Metric Dial Face

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem attachment to convert the indicator to a stem mount.

Metric/Inch Dial Face and Inch/Metric Dial Face—Inch/metric indicators have both measurements on the dial face for quick conversions.

Variance Indicators																			Replacement Variance Indicator Cases
Distance Measured		Measuring Increments		Accuracy				Dial			Contact Point
Inch	Metric, mm	Inch	Metric, mm	Inch	Metric	Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Reading Metric	Dia.	Lg.	Mounting Thread Size	Swivel Angle	Features	Mfr. Model No.		Each		Each
0" to 0.0075"	0 to 0.2	0.0001"	0.002	±0.00015"	±0.003 mm	5/16"	3	1 9/16"	0-38-0	0-10-0	0.079"	0.6"	M1.7	190°	Metric/Inch Dial Face	513-409-10E	0000000	0000000	0000000	00000
0" to 0.03"	0 to 0.7	0.0005"	0.01	±0.0005"	±0.015 mm	5/16"	3	1 9/16"	0-15-0	0-35-0	0.079"	0.65"	M1.7	190°	Inch/Metric Dial Face	513-406-10E	0000000	000000	0000000	0000
0" to 0.008"	—	0.0001"	—	±0.0001"	—	3/8"	3	1 9/16"	0-4-0	—	0.079"	0.61"	M1.7	190°	—	513-403-10E	000000	000000	0000000	0000
0" to 0.016"	—	0.0001"	—	±0.0002"	—	5/32", 3/8"	3	1 9/16"	0-4-0	—	0.079"	0.61"	M1.7	190°	—	513-443-16A	000000	000000	0000000	00000
0" to 0.03"	—	0.0005"	—	±0.0005"	—	3/8"	3	1 9/16"	0-15-0	—	0.079"	0.65"	M1.7	190°	—	513-402-10E	0000000	000000	0000000	0000
0" to 0.03"	—	0.0005"	—	±0.0005"	—	3/8"	3	1 9/16"	0-15-0	—	0.079"	1.2"	M1.7	190°	—	513-412-10E	000000	000000	0000000	0000
0" to 0.06"	—	0.0005"	—	±0.0005"	—	5/32", 3/8"	3	1 9/16"	0-15-0	—	0.079"	0.65"	M1.7	190°	—	513-442-16A	000000	000000	0000000	00000
0" to 0.06"	—	0.0005"	—	±0.0005"	—	5/32", 3/8"	3	1 9/16"	0-15-0	—	0.079"	1.2"	M1.7	190°	—	513-446-16A	000000	000000	0000000	00000
—	0 to 0.14	—	0.001	—	±0.004 mm	5/16"	3	1 9/16"	—	0-70-0	0.079"	0.44"	M1.7	190°	—	513-401-10E	0000000	000000	0000000	0000
—	0 to 0.2	—	0.01	—	±0.003 mm	5/16"	3	1 9/16"	—	0-100-0	0.079"	0.6"	M1.7	190°	—	513-405-10E	000000	000000	0000000	0000
—	0 to 0.5	—	0.01	—	±0.005 mm	5/16"	3	1 9/16"	—	0-25-0	0.079"	0.74"	M1.7	190°	—	513-424-10E	0000000	000000	0000000	0000
—	0 to 0.8	—	0.01	—	±0.008 mm	5/16"	3	1 9/16"	—	0-40-0	0.079"	0.69"	M1.7	190°	—	513-404-10E	000000	000000	0000000	0000

Variance Indicator Contact Points

Lg.	Mounting Thread Size	Material	Mfr. Model No.		Each



0.079"	0.441"	M1.7 × 0.35 mm	Carbide	103010	000000	000000


0.079"	0.453"	M1.7 × 0.35 mm	Carbide	136075	000000	00000
0.079"	0.61"	M1.7 × 0.35 mm	Carbide	21CZB064	000000	0000
0.079"	0.65"	M1.7 × 0.35 mm	Carbide	133195	000000	00000
0.079"	0.685"	M1.7 × 0.35 mm	Carbide	103006	000000	00000
0.079"	1.2"	M1.7 × 0.35 mm	Carbide	136290	000000	00000

Economy Dial Lever Variance Indicators

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have jeweled bearings for high sensitivity, wear resistance, and a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem attachments to convert the indicator to a stem mount.

Horizontal Orientation

						Dial		Contact Point
	Distance Measured	Measuring Increments	Accuracy	Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Dia.	Lg.	Swivel Angle	Includes		Each
Dovetail Mount, Stem Mount







				Jeweled Bearing

				0" to 0.008"	0.0001"	±0.00015"	5/32", 3/8"	2	1 9/32"	0-40-0	0.078"	1/2"	180°	5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment	0000000	000000


				0" to 0.03"	0.0005"	±0.0004"	5/32", 3/8"	2	1 9/32"	0-15-0	0.078"	1/2"	180°	5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment	0000000	00000

Vertical Orientation

						Dial		Contact Point
	Distance Measured	Measuring Increments	Accuracy	Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Dia.	Lg.	Swivel Angle	Includes		Each
Dovetail Mount, Stem Mount







				Jeweled Bearing

				0" to 0.008"	0.0001"	±0.00015"	5/32", 3/8"	2	1 9/32"	0-40-0	0.078"	1/2"	180°	5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment	0000000	000000


				0" to 0.03"	0.0005"	±0.0004"	5/32", 3/8"	2	1 9/32"	0-15-0	0.078"	1/2"	180°	5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment	0000000	00000

Interapid Dial Lever Variance Indicators

Measure larger ranges than with our other lever-style indicators. Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. Rotate the dial face for viewing at multiple angles. Bearings are jeweled for high sensitivity, wear resistance, and a long service life. A revolution counter helps you keep track of dial revolutions.

Horizontal Orientation

						Dial		Contact Point
	Distance Measured	Measuring Increments	Accuracy	Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Dia.	Lg.	Mounting Thread Size	Swivel Angle	Mfr. Model No.		Each
Dovetail Mount, Stem Mount







				Jeweled Bearing

				0" to 0.016"	0.0001"	±0.0001"	5/32"	2	1 1/2"	0-4-0	0.08"	0.65"	M1.7	210°	312b-3	00000000	0000000


				0" to 0.06"	0.001"	±0.001"	5/32"	2	1 1/4"	0-15-0	0.08"	0.65"	M1.7	210°	312b-20	00000000	000000
				0" to 0.06"	0.0005"	±0.0005"	5/32"	2	1 1/4"	0-15-0	0.08"	0.65"	M1.7	210°	312b-2	00000000	000000
				0" to 0.06"	0.0005"	±0.0005"	5/32"	2	1 1/2"	0-15-0	0.08"	0.65"	M1.7	210°	312b-1	00000000	000000
				0 mm to 1.6 mm	0.01 mm	±0.01 mm	5/32"	2	1 15/32"	0-40-0	0.08"	0.65"	M1.7	210°	312-1	00000000	000000

Accessories and Replacements for Variance Indicators

Variance Indicator Contact Points

Lg.	Mounting Thread Size	Material	Mfr. Model No.		Each



0.031"	0.703"	M1.7 × 0.35 mm	Carbide	74.105998	00000000	000000


0.031"	0.842"	M1.7 × 0.35 mm	Carbide	74.111488	00000000	00000
0.031"	1.465"	M1.7 × 0.35 mm	Carbide	74.106363	00000000	00000
0.031"	1.765"	M1.7 × 0.35 mm	Carbide	74.111493	00000000	00000
0.06"	0.718"	M1.7 × 0.35 mm	Carbide	74.105997	00000000	00000
0.06"	0.857"	M1.7 × 0.35 mm	Carbide	74.111487	00000000	00000
0.08"	0.728"	M1.7 × 0.35 mm	Carbide	74.105996	00000000	00000
0.08"	0.867"	M1.7 × 0.35 mm	Carbide	74.111486	00000000	00000
0.08"	1.409"	M1.7 × 0.35 mm	Carbide	74.106361	00000000	00000
0.08"	1.79"	M1.7 × 0.35 mm	Carbide	74.111492	00000000	00000
0.093"	0.735"	M1.7 × 0.35 mm	Carbide	74.116285	00000000	00000

Variance Indicator Stem Adapters

Stem adapters (sold separately) increase the diameter of your indicator mounting stem from _5/32" to _3/8" so it can be mounted to holders that fit _3/8" diameter stems.

For Mounting Stem Dia.	Material		Each
5/32" × 3/8"	Steel	00000000	000000

Vertical Orientation

						Dial		Contact Point
	Distance Measured	Measuring Increments	Accuracy	Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Dia.	Lg.	Mounting Thread Size	Swivel Angle	Mfr. Model No.		Each
Dovetail Mount, Stem Mount







				Jeweled Bearing

				0" to 0.016"	0.0001"	±0.0001"	5/32"	1	1 1/2"	0-4-0	0.08"	0.65"	M1.7	190°	312b-3v	00000000	0000000


				0" to 0.06"	0.001"	±0.001"	5/32"	1	1 1/4"	0-15-0	0.08"	0.65"	M1.7	190°	312b-20v	00000000	000000
				0" to 0.06"	0.0005"	±0.0005"	5/32"	1	1 1/4"	0-15-0	0.08"	0.65"	M1.7	190°	312b-2v	00000000	000000
				0" to 0.06"	0.0005"	±0.0005"	5/32"	1	1 1/2"	0-15-0	0.08"	0.65"	M1.7	190°	312b-1v	00000000	000000

Accessories and Replacements for Variance Indicators

Variance Indicator Contact Points

Lg.	Mounting Thread Size	Material	Mfr. Model No.		Each



0.031"	0.703"	M1.7 × 0.35 mm	Carbide	74.105998	00000000	000000


0.031"	0.842"	M1.7 × 0.35 mm	Carbide	74.111488	00000000	00000
0.031"	1.465"	M1.7 × 0.35 mm	Carbide	74.106363	00000000	00000
0.031"	1.765"	M1.7 × 0.35 mm	Carbide	74.111493	00000000	00000
0.06"	0.718"	M1.7 × 0.35 mm	Carbide	74.105997	00000000	00000
0.06"	0.857"	M1.7 × 0.35 mm	Carbide	74.111487	00000000	00000
0.08"	0.728"	M1.7 × 0.35 mm	Carbide	74.105996	00000000	00000
0.08"	0.867"	M1.7 × 0.35 mm	Carbide	74.111486	00000000	00000
0.08"	1.409"	M1.7 × 0.35 mm	Carbide	74.106361	00000000	00000
0.08"	1.79"	M1.7 × 0.35 mm	Carbide	74.111492	00000000	00000
0.093"	0.735"	M1.7 × 0.35 mm	Carbide	74.116285	00000000	00000

Variance Indicator Stem Adapters

Stem adapters (sold separately) increase the diameter of your indicator mounting stem from _5/32" to _3/8" so it can be mounted to holders that fit _3/8" diameter stems.

For Mounting Stem Dia.	Material		Each
5/32" × 3/8"	Steel	00000000	000000

Clamp-On Variance Indicator Holders

Attach the C-clamp on these holders to your milling machine head to take indicator measurements without obstructing the cutting tool. Use the fine-adjustment rod to precisely position the arm.

Overall reach is the distance from the center of the C-clamp to the end of the arm when both are extended.

	Overall Reach	Rod Lg.	Material		Each
Dovetail and Stem Mount







	Fine-Adjustment Rod

	5/32"	C	1 3/4" to 2"	7 1/2"	4"	Steel	00000000	0000000


	5/32"	C	1 7/8" to 2 1/4"	9 1/8"	6"	Steel	00000000	000000

Replacement Variance Indicator Holder Rods

		Each
4" Replacement Rod	00000000	000000
6" Replacement Rod	00000000	00000

Starrett Dial Lever Variance Indicator Sets


	Side View

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included attachments with the swivel clamp to mount the indicator in the setup of your choice.

Variance Indicators											Replacement Variance Indicator Cases
				Dial
Distance Measured	Measuring Increments	Accuracy	No. of Dovetail Mounts	Dia.	Reading Inch	Includes	Mfr. Model No.	Choose a Dial Face Color		Each		Each
0" to 0.01"	0.0001"	±0.0001"	3	1 3/8"	0-5-0	3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod	708ACZ	White , Red , Black	00000000	0000000	0000000	000000
0" to 0.02"	0.0001"	±0.0002"	3	1 3/8"	0-5-0	3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod	708BCZ	White	00000000	000000	0000000	00000
0" to 0.03"	0.0005"	±0.0005"	3	1 3/8"	0-15-0	3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod	709ACZ	White , Red , Black	00000000	000000	0000000	00000
0" to 0.06"	0.0005"	±0.001"	3	1 3/8"	0-15-0	3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod	709BCZ	White	00000000	000000	0000000	00000

Variance Indicator Contact Points

Starrett Dial Lever Variance Indicators


Side View

	Variance Indicators													Replacement Variance Indicator Cases
					Dial		Contact Point
	Distance Measured	Measuring Increments	Accuracy	No. of Dovetail Mounts	Dia.	Reading Inch	Dia.	Lg.	Mounting Thread Size	Swivel Angle	Mfr. Model No.		Each		Each
Dovetail Mount







				Jeweled Bearing

				0" to 0.01"	0.0001"	±0.0001"	3	1 3/8"	0-5-0	0.078"	13/16"	1-64	180°	708AZ	00000000	0000000	0000000	000000


				0" to 0.02"	0.0001"	±0.0002"	3	1 3/8"	0-5-0	0.078"	13/16"	1-64	180°	708BZ	00000000	000000	0000000	00000
				0" to 0.03"	0.0005"	±0.0005"	3	1 3/8"	0-15-0	0.078"	13/16"	1-64	180°	709AZ	0000000	000000	0000000	00000
				0" to 0.06"	0.0005"	±0.001"	3	1 3/8"	0-15-0	0.078"	13/16"	1-64	180°	709BZ	00000000	000000	0000000	00000

Variance Indicator Contact Points

Mitutoyo Dial Lever Variance Indicator Sets


	Side View	Metric/Inch Dial Face	Inch/Metric Dial Face

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem and height gauge/tool post attachments with the swivel clamp to mount the indicator.

Metric/Inch Dial Face—Those with a metric/inch dial face have metric measurements on the outer ring and imperial on the inner for quick reading conversions.

Inch/Metric Dial Face—Those with an inch/metric dial face have imperial measurements on the outer ring and metric on the inner for quick reading conversions.

Variance Indicators																Replacement Variance Indicator Cases
Distance Measured		Measuring Increments		Accuracy				Dial
Inch	Metric, mm	Inch	Metric, mm	Inch	Metric	Mounting Stem Dia.	No. of Dovetail Mounts	Dia.	Reading Inch	Reading Metric	Includes	Features	Mfr. Model No.		Each		Each
0" to 0.008"	0 to 0.2	0.0001"	0.002	±0.0001"	±0.003 mm	3/16"	3	1 3/16"	0-10-0	0-38-0	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	Metric/Inch Dial Face	513-409-10T	00000000	0000000	0000000	00000
0" to 0.03"	0 to 0.7	0.0005"	0.01	±0.0005"	±0.0015 mm	3/16"	3	1 3/16"	0-15-0	0-35-0	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	Inch/Metric Dial Face	513-406-10T	00000000	000000	0000000	0000
0" to 0.008"	—	0.0001"	—	±0.0001"	—	3/8"	3	1 9/16"	0-4-0	—	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-403-10T	0000000	000000	0000000	0000
0" to 0.016"	—	0.0001"	—	±0.0002"	—	3/8"	3	1 9/16"	0-4-0	—	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-443-16T	0000000	000000	0000000	00000
0" to 0.03"	—	0.0005"	—	±0.0005"	—	3/16"	3	1 3/16"	0-15-0	—	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-402-10T	00000000	000000	0000000	0000
0" to 0.03"	—	0.0005"	—	±0.0005"	—	3/8"	3	1 9/16"	0-15-0	—	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-412-10T	0000000	000000	0000000	0000
0" to 0.06"	—	0.0005"	—	±0.0005"	—	3/8"	3	1 9/16"	0-15-0	—	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-442-16T	0000000	000000	0000000	00000
0" to 0.06"	—	0.0005"	—	±0.0005"	—	3/8"	3	1 9/16"	0-15-0	—	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-446-16T	0000000	000000	0000000	00000
—	0 to 0.2	—	0.002	—	±0.003 mm	5/16"	3	1 9/16"	—	0-100-0	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-405-10T	0000000	000000	0000000	0000
—	0 to 0.8	—	0.01	—	±0.008 mm	5/16"	3	1 9/16"	—	0-40-0	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-404-10T	0000000	000000	0000000	0000
—	0 to 1.6	—	0.01	—	±0.01 mm	3/16"	3	1 3/16"	—	0-40-0	0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp	—	513-444-10T	00000000	000000	0000000	00000

Variance Indicator Contact Points

Lg.	Mounting Thread Size	Material	Mfr. Model No.		Each



0.079"	0.441"	M1.7 × 0.35 mm	Carbide	103010	000000	000000


0.079"	0.453"	M1.7 × 0.35 mm	Carbide	136075	000000	00000
0.079"	0.61"	M1.7 × 0.35 mm	Carbide	21CZB064	000000	0000
0.079"	0.65"	M1.7 × 0.35 mm	Carbide	133195	000000	00000
0.079"	0.685"	M1.7 × 0.35 mm	Carbide	103006	000000	00000
0.079"	1.2"	M1.7 × 0.35 mm	Carbide	136290	000000	00000

			Pkg.
	Pkg. Qty.		1-9	10-49	50-Up
Replacement Battery for 543-702B, 543-712, 543-712B, and 543-722B Models (1 per Pkg.)	1	0000000	00000	00000	00000