Maximum Measurement Maximum Measurement |
|---|
|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
Dial Type Dial Type |
|---|
|
Dial Face Color Dial Face Color |
|---|
 | White |
 | Black |
 | Red |
 | White/Yellow |
Contact Point Head Diameter Contact Point Head Diameter |
|---|
|
|
|
Dial Hand Direction Dial Hand Direction |
|---|
|
Starrett Continuous Dial Back
Plunger-Style Variance Indicators
The contact point is located on the back of this indicator, which allows the dial face to be read from above. It has a continuous dial numbered clockwise around the face for direct measurements. A rugged design with few moving parts and highly sensitive, wear-resistant jeweled bearings give it a longer service life than other indicators. Rotate the dial face for viewing at multiple angles. The included tip adapter lets you use AGD-standard contact points that have 4-48 threads.
Dial | Contact Point | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Mount. Stem Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Includes | Manufacturer Model Number | Each | |
| 0"-0.200" | 0.001" | ±0.001" | 1/4" | 1 3/8" | 0-100 | 1/8", 5/16", 1/2" | 1/4" | 0.127"-60 | One 1/8" Dia. Contact Point One 5/16" Dia. Contact Point One 1/2" Dia. Contact Point Tip Adapter | 196B1 | 0000000 | 0000000 |
| Mount. Hole Dia. | Hole Dia. Range | Manufacturer Model Number | Each | |
| 5/16" | 3/32" to 1/4" | PT18718 | 0000000 | 000000 |
| For Contact Point Thread Size | Manufacturer Model Number | Each | |
| 4-48 | 196R | 0000000 | 00000 |
| For Inside Hole Dp. | Manufacturer Model Number | Each | |
| 1 5/8" | 196F | 0000000 | 000000 |
Upright Post | Bar | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Lg. | Wd. | Ht. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | 6" | 3/4" | 3/8" | PT99438 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 3" | 5/16" | PT99437 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | PT13820 | 0000000 | 000000 |
Starrett Continuous Dial Back Plunger-Style
Variance Indicators with Calibration Certificate
This indicator comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. The contact point is located on the back, which allows the dial face to be read from above. It has a continuous dial numbered clockwise around the face for direct measurements. A rugged design with few moving parts and highly sensitive, wear-resistant jeweled bearings give it a longer service life than other indicators. Rotate the dial face for viewing at multiple angles. The included tip adapter lets you use AGD-standard contact points that have 4-48 threads.
Dial | Contact Point | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Mount. Stem Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Includes | Manufacturer Model Number | Each | |
| 0"-0.200" | 0.001" | ±0.001" | 1/4" | 1 3/8" | 0-100 | 1/8", 5/16", 1/2" | 1/4" | 0.127"-60 | One 1/8" Dia. Contact Point One 5/16" Dia. Contact Point One 1/2" Dia. Contact Point Tip Adapter | 196B1 | 0000000 | 0000000 |
| Mount. Hole Dia. | Hole Dia. Range | Manufacturer Model Number | Each | |
| 5/16" | 3/32" to 1/4" | PT18718 | 0000000 | 000000 |
| For Contact Point Thread Size | Manufacturer Model Number | Each | |
| 4-48 | 196R | 0000000 | 00000 |
| For Inside Hole Dp. | Manufacturer Model Number | Each | |
| 1 5/8" | 196F | 0000000 | 000000 |
Upright Post | Bar | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Lg. | Wd. | Ht. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | 6" | 3/4" | 3/8" | PT99438 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 3" | 5/16" | PT99437 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | PT13820 | 0000000 | 000000 |
Accessories for Starrett Continuous Dial
Back Plunger-Style Variance Indicators
Tip adapter lets you use AGD-standard contact points that have 4-48 threads with the Starrett back plunger-style dial indicator.
Hole attachment allows the Starrett back plunger-style dial indicator to take measurements inside holes and around obstructions.
Use the height gauge/tool post attachment to mount the Starrett back plunger-style dial indicator in your lathe tool post or the scriber clamp of your height gauge. Attach the indicator to the upright post with the swivel clamp.
Use the C-clamp with post to clamp the Starrett back plunger-style dial indicator to most thin, flat surfaces. Attach the indicator to the upright post with the swivel clamp.
| Mount. Hole Dia. | Hole Dia. Range | Manufacturer Model Number | Each | |
| 5/16" | 3/32" to 1/4" | PT18718 | 0000000 | 000000 |
| For Contact Point Thread Size | Manufacturer Model Number | Each | |
| 4-48 | 196R | 0000000 | 00000 |
| For Inside Hole Dp. | Manufacturer Model Number | Each | |
| 1 5/8" | 196F | 0000000 | 000000 |
Upright Post | Bar | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Lg. | Wd. | Ht. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | 6" | 3/4" | 3/8" | PT99438 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 3" | 5/16" | PT99437 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | PT13820 | 0000000 | 000000 |
Starrett Continuous Dial Back
Plunger-Style Variance Indicator Sets
The contact point is located on the back of this indicator, which allows the dial face to be read from above. It has a continuous dial numbered clockwise around the face for direct measurements. A rugged design with few moving parts and highly sensitive, wear-resistant jeweled bearings give it a longer service life than other indicators. Rotate the dial face for viewing at multiple angles.
Tip adapter lets you use AGD-standard contact points that have 4-48 threads with this indicator.
Hole attachment allows the indicator to take measurements inside holes and around obstructions.
Use the height gauge/tool post attachment to mount the indicator in your lathe tool post or the scriber clamp of your height gauge. Attach the indicator to the upright post with the swivel clamp.
Use the C-clamp with post to clamp the Starrett back plunger-style dial indicator to most thin, flat surfaces. Attach the indicator to the upright post with the swivel clamp.
Dial | Contact Point | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Mount. Stem Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Includes | Manufacturer Model Number | Each | |
| 0"-0.200" | 0.001" | ±0.001" | 1/4" | 1 7/16" | 0-100 | 1/8", 5/16", 1/2" | 1/4" | 0.127"-60 | C-Clamp with Post Height Gauge/Tool Post Attachment Hole Attachment One 1/8" Dia. Contact Point One 5/16" Dia. Contact Point One 1/2" Dia. Contact Point Swivel Clamp | 196A1Z | 0000000 | 0000000 |
| Mount. Hole Dia. | Hole Dia. Range | Manufacturer Model Number | Each | |
| 5/16" | 3/32" to 1/4" | PT18718 | 0000000 | 000000 |
| For Contact Point Thread Size | Manufacturer Model Number | Each | |
| 4-48 | 196R | 0000000 | 00000 |
| For Inside Hole Dp. | Manufacturer Model Number | Each | |
| 1 5/8" | 196F | 0000000 | 000000 |
Upright Post | Bar | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Lg. | Wd. | Ht. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | 6" | 3/4" | 3/8" | PT99438 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 3" | 5/16" | PT99437 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | PT13820 | 0000000 | 000000 |
Contact Points for Starrett Continuous Dial
Back Plunger-Style Variance Indicators
Antimagnetic Starrett Continuous Dial Back
Plunger-Style Variance Indicator Sets
Use the indicator in this set near magnetic chucks and other equipment with a magnetic field. The contact point is located on the back, which allows the dial face to be read from above. It has a continuous dial numbered clockwise around the face for direct measurements. A rugged design with few moving parts and highly sensitive, wear-resistant jeweled bearings give it a longer service life than other indicators. Rotate the dial face for viewing at multiple angles.
Tip adapter lets you use AGD-standard contact points that have 4-48 threads with this indicator.
Hole attachment allows the indicator to take measurements inside holes and around obstructions.
Use the height gauge/tool post attachment to mount the indicator in your lathe tool post or the scriber clamp of your height gauge. Attach the indicator to the upright post with the swivel clamp.
Use the C-clamp with post to clamp the Starrett back plunger-style dial indicator to most thin, flat surfaces. Attach the indicator to the upright post with the swivel clamp.
Dial | Contact Point | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Mount. Stem Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Includes | Manufacturer Model Number | Each | |
| 0"-0.200" | 0.001" | ±0.001" | 1/4" | 1 7/16" | 0-100 | 1/8", 5/16", 1/2" | 1/4" | 0.127"-60 | C-Clamp with Post Height Gauge/Tool Post Attachment Hole Attachment One 1/8" Dia. Contact Point One 5/16" Dia. Contact Point One 1/2" Dia. Contact Point Swivel Clamp | 196A6Z | 0000000 | 0000000 |
| Mount. Hole Dia. | Hole Dia. Range | Manufacturer Model Number | Each | |
| 5/16" | 3/32" to 1/4" | PT18718 | 0000000 | 000000 |
| For Contact Point Thread Size | Manufacturer Model Number | Each | |
| 4-48 | 196R | 0000000 | 00000 |
| For Inside Hole Dp. | Manufacturer Model Number | Each | |
| 1 5/8" | 196F | 0000000 | 000000 |
Upright Post | Bar | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Lg. | Wd. | Ht. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | 6" | 3/4" | 3/8" | PT99438 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 3" | 5/16" | PT99437 | 0000000 | 000000 |
Upright Post | ||||
|---|---|---|---|---|
| Lg. | Dia. | Manufacturer Model Number | Each | |
| 4 1/2" | 5/16" | PT13820 | 0000000 | 000000 |
Starrett Continuous Dial Plunger-Style Variance Indicators
For direct measurements, these indicators have a continuous dial numbered clockwise around the face. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.
Jeweled bearings are more sensitive and wear resistant than plain bearings for a longer service life.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
Plain | |||||||||||||
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-441P | 0000000 | 0000000 |
Jeweled | |||||||||||||
| 0"-0.200" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-10 | 3/8" | 1/4" | 4-48 | 25-611J | 0000000 | 000000 |
| 0"-0.250" | 0.001" | ±0.001" | AGD Group 1 | 3/8" | 1/4" | 1 11/16" | 0-100 | 3/8" | 1/4" | 4-48 | 81-241J | 0000000 | 000000 |
| 0"-0.250" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-241J | 0000000 | 000000 |
| 0"-0.500" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-441/5J | 0000000 | 000000 |
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-441J | 0000000 | 000000 |
| 0"-1.000" | 0.0005" | ±0.0005" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50 | 3/8" | 1/4" | 4-48 | 25-631J | 0000000 | 000000 |
| 0"-2.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-2041J | 0000000 | 000000 |
| 0"-3.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-3041J | 0000000 | 000000 |
| 0"-4.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-4041J | 0000000 | 000000 |
| 0"-5.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-5041J | 0000000 | 000000 |
Starrett Continuous Dial Plunger-Style
Variance Indicators with Calibration Certificate
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They have a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles. Jeweled bearings are more sensitive and wear resistant than plain bearings for a longer service life.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
| 0"-0.200" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-10 | 3/8" | 1/4" | 4-48 | 25-611J | 0000000 | 0000000 |
| 0"-0.250" | 0.001" | ±0.001" | AGD Group 1 | 3/8" | 1/4" | 1 11/16" | 0-100 | 3/8" | 1/4" | 4-48 | 81-241J | 0000000 | 000000 |
| 0"-0.250" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-241J | 0000000 | 000000 |
| 0"-0.500" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-441/5J | 0000000 | 000000 |
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-441J | 0000000 | 000000 |
| 0"-1.000" | 0.0005" | ±0.0005" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50 | 3/8" | 1/4" | 4-48 | 25-631J | 0000000 | 000000 |
| 0"-2.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-2041J | 0000000 | 000000 |
| 0"-3.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-3041J | 00000000 | 000000 |
| 0"-4.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-4041J | 00000000 | 000000 |
| 0"-5.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/8" | 1/4" | 4-48 | 25-5041J | 00000000 | 000000 |
Starrett Plus/Minus Dial Plunger-Style Variance Indicators
For comparative measurements of a part's tolerance against a reference measurement, these indicators have a balanced dial with positive values on one side and negative values on the other side. A spring-loaded plunger retracts and extends to measure objects. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
| 0"-0.200" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 3/8" | 1/4" | 4-48 | 25-511J | 0000000 | 0000000 |
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/8" | 1/4" | 4-48 | 25-341J | 0000000 | 000000 |
Starrett Plus/Minus Dial Plunger-Style
Variance Indicators with Calibration Certificate
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They have a balanced dial with positive values on one side of the zero and negative values on the other side for comparative measurements of a part's tolerance against a reference measurement. A spring-loaded plunger retracts and extends to measure objects. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
| 0"-0.200" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 3/8" | 1/4" | 4-48 | 25-511J | 00000000 | 0000000 |
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/8" | 1/4" | 4-48 | 25-341J | 0000000 | 000000 |
Starrett Electronic Plunger-Style Variance Indicators
View measurements on an easy-to-read LCD. A spring-loaded plunger retracts and extends to measure objects. These indicators have a zero-set button that lets you start measuring at any point.
Indicators with a rotating dial face can be viewed from multiple angles.
Indicators with SPC data output can be connected to a PC or data processor.
Indicators with go/no-go operation indicate when measurements fall outside your set tolerance.
Indicators with zero-position memory, also known as absolute (ABS) positioning, retain the measuring position when the indicator is off.
USB data cable (sold separately) connects indicators with SPC data output directly to your PC.
10-pin data cable (sold separately) connects indicators with SPC data output to a miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data to your PC without being tethered by a cable.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
| 0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Zero-Set Button | 3900-5 | 00000000 | 0000000 |
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
| 0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.203" | 1/4" | 4-48 | Zero-Set Button | 2900-3-1 | 00000000 | 0000000 |
| 0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | 2900-5-1 | 00000000 | 000000 |
| 0"-1" | 0-25 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 3 | 3/8" | 1/4" | 2 19/32" | 0.188" | 1/4" | 4-48 | Display Freeze, Function Lock, Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | F2730IQ | 0000000 | 000000 |
| Each | ||
| USB Data Cable for 2900 Series Model (6 ft.) | 0000000 | 0000000 |
| USB Data Cable for F2730IQ Model (6 ft.) | 0000000 | 000000 |
| 10-Pin Data Cable for 2900 Series Model (5 1/2 ft.) | 0000000 | 000000 |
| 10-Pin Data Cable for F2730IQ Model (5 1/2 ft.) | 0000000 | 000000 |
| Wireless Data Transmitter for 2900 Series Model | 0000000 | 000000 |
| Wireless Data Transmitter for F2730IQ Model | 0000000 | 000000 |
| Wireless Data Receiver | 0000000 | 00000000 |
| Replacement Battery for 3900-5 Model | 0000000 | 0000 |
| Pkg. | ||
|---|---|---|
| Replacement Battery for 2900 Series Model (1 per Pkg.) | 0000000 | 0000 |
| Replacement Battery for F2730IQ Model (1 per Pkg.) | 0000000 | 0000 |
Starrett Electronic Plunger-Style Variance
Indicators with Calibration Certificate
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. A spring-loaded plunger retracts and extends to measure objects. They have a zero-set button that lets you start measuring at any point.
Indicators with a rotating dial face can be viewed from multiple angles.
Indicators with SPC data output can be connected to a PC or data processor.
Indicators with go/no-go operation indicate when measurements fall outside your set tolerance.
Indicators with zero-position memory, also known as absolute (ABS) positioning, retain the measuring position when the indicator is off.
USB data cable (sold separately) connects indicators with SPC data output directly to your PC.
10-pin data cable (sold separately) connects indicators with SPC data output to a miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data to your PC without being tethered by a cable.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
| 0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Zero-Set Button | 3900-5 | 00000000 | 0000000 |
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
| 0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.203" | 1/4" | 4-48 | Zero-Set Button | 2900-3-1 | 00000000 | 0000000 |
| 0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | 2900-5-1 | 00000000 | 000000 |
| 0"-1" | 0-25 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 3 | 3/8" | 1/4" | 2 19/32" | 0.188" | 1/4" | 4-48 | Display Freeze, Function Lock, Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | F2730IQ | 0000000 | 000000 |
| Each | ||
| USB Data Cable for 2900 Series Model (6 ft.) | 0000000 | 0000000 |
| USB Data Cable for F2730IQ Model (6 ft.) | 0000000 | 000000 |
| 10-Pin Data Cable for 2900 Series Model (5 1/2 ft.) | 0000000 | 000000 |
| 10-Pin Data Cable for F2730IQ Model (5 1/2 ft.) | 0000000 | 000000 |
| Wireless Data Transmitter for 2900 Series Model | 0000000 | 000000 |
| Wireless Data Transmitter for F2730IQ Model | 0000000 | 000000 |
| Wireless Data Receiver | 0000000 | 00000000 |
| Replacement Battery for 3900-5 Model | 0000000 | 0000 |
| Pkg. | ||
|---|---|---|
| Replacement Battery for 2900 Series Model (1 per Pkg.) | 0000000 | 0000 |
| Replacement Battery for F2730IQ Model (1 per Pkg.) | 0000000 | 0000 |
Starrett Dial Lever-Style Variance Indicator Sets
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included attachments with the swivel clamp to mount the indicator in the setup of your choice.
Dial | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Number of Dovetail Mounts | Reading | Dia. | Includes | Manufacturer Model Number | Choose a Dial Face Color | Each | |
| 0"-0.01" | 0.0001" | ±0.0001" | 3 | 0-5-0 | 1 3/8" | 3/8" Dia. Dovetail-to-Stem Attachment, Height Gauge/Tool Post Attachment, Swivel Clamp with Dovetail Mount, Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 708ACZ | 00000000 | 0000000 | |
| 0"-0.02" | 0.0001" | ±0.0002" | 3 | 0-5-0 | 1 3/8" | 3/8" Dia. Dovetail-to-Stem Attachment, Height Gauge/Tool Post Attachment, Swivel Clamp with Dovetail Mount, Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 708BCZ | White | 00000000 | 000000 |
| 0"-0.03" | 0.0005" | ±0.0005" | 3 | 0-15-0 | 1 3/8" | 3/8" Dia. Dovetail-to-Stem Attachment, Height Gauge/Tool Post Attachment, Swivel Clamp with Dovetail Mount, Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 709ACZ | 00000000 | 000000 | |
| 0"-0.06" | 0.0005" | ±0.001" | 3 | 0-15-0 | 1 3/8" | 3/8" Dia. Dovetail-to-Stem Attachment, Height Gauge/Tool Post Attachment, Swivel Clamp with Dovetail Mount, Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 709BCZ | White | 00000000 | 000000 |
| Dia. | Lg. | Mounting Thread Size | Material | Manufacturer Model Number | Each | |
| 0.078" | 0.897" | 1-64 | Carbide | PT23914 | 00000000 | 000000 |
Starrett Dial Lever-Style Variance Indicators
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
Dial | Contact Point | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Number of Dovetail Mounts | Reading | Dia. | Head Dia. | Lg. | Mounting Thread Size | Swivel Angle | Manufacturer Model Number | Each | |
| 0"-0.01" | 0.0001" | ±0.0001" | 3 | 0-5-0 | 1 3/8" | 0.078" | 13/16" | 1-64 | 180° | 708AZ | 00000000 | 0000000 |
| 0"-0.02" | 0.0001" | ±0.0002" | 3 | 0-5-0 | 1 3/8" | 0.078" | 13/16" | 1-64 | 180° | 708BZ | 00000000 | 000000 |
| 0"-0.03" | 0.0005" | ±0.0005" | 3 | 0-15-0 | 1 3/8" | 0.078" | 13/16" | 1-64 | 180° | 709AZ | 0000000 | 000000 |
| 0"-0.06" | 0.0005" | ±0.001" | 3 | 0-15-0 | 1 3/8" | 0.078" | 13/16" | 1-64 | 180° | 709BZ | 00000000 | 000000 |
| Dia. | Lg. | Mounting Thread Size | Material | Manufacturer Model Number | Each | |
| 0.078" | 0.897" | 1-64 | Carbide | PT23914 | 00000000 | 000000 |
Starrett Last Word Dial Lever-Style Variance Indicator Sets
Half the dial face is white and the other half is yellow to make measurements easier to read. Also known as test indicators, they have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. The ratcheting contact point can be adjusted to various angles. Mount the indicator into lathe tool posts, height gauges, surface gauges, and other setups with the included accessories.
Dial | Shank | Contact Point | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Reading | Dia. | Lg. | Wd. | Ht. | Head Dia. | Lg. | Includes | Manufacturer Model Number | Each | |
| 0"-0.03" | 0.0005" | ±0.0005" | 0-15-0 | 1" | 3 1/32" | 1/2" | 1/4" | 0.035" 0.062" 0.12" | 5/32" 31/64" 33/64" | 9/32" Dia. Connector Sleeve Ball-and-Socket Swivel Attachment with 3/16" Dia. Shank Ball-and-Socket Swivel Height Gauge Attachment Double-Jointed Arm Attachment Height Gauge/Tool Post Attachment with Jointed Arm Surface Gauge Attachment Swivel Clamp | 711LCSZ | 000000 | 0000000 |
| 0"-0.03" | 0.001" | ±0.001" | 0-15-0 | 1" | 3 1/32" | 1/2" | 1/4" | 0.035" 0.062" 0.12" | 5/32" 31/64" 33/64" | 9/32" Dia. Connector Sleeve Ball-and-Socket Swivel Attachment with 3/16" Dia. Shank Ball-and-Socket Swivel Height Gauge Attachment Double-Jointed Arm Attachment Height Gauge/Tool Post Attachment with Jointed Arm Surface Gauge Attachment Swivel Clamp | 711GCSZ | 000000 | 000000 |
Universal-Shank Starrett Last Word
Dial Lever-Style Variance Indicators
Mount these indicators to a lathe tool post or a height gauge with the included attachment, also known as a universal shank. Half the dial face is white and the other half is yellow to make measurements easier to read. Also known as test indicators, they have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. The ratcheting contact point can be adjusted to various angles.
Dial | Shank | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Reading | Dia. | Dia. | Lg. | Wd. | Head Dia. | Lg. | Swivel Angle | Includes | Manufacturer Model Number | Each | |
| 0"-0.03" | 0.0005" | ±0.0005" | 0-15-0 | 1" | 1/4" | 3 1/32" | 1/2" | 0.12" | 5/32" | 180° | Height Gauge/Tool Post Attachment with Jointed Arm | 711HSAZ | 000000 | 0000000 |
| 0"-0.03" | 0.001" | ±0.001" | 0-15-0 | 1" | 1/4" | 3 1/32" | 1/2" | 0.12" | 5/32" | 180° | Height Gauge/Tool Post Attachment with Jointed Arm | 711FSAZ | 000000 | 000000 |
Starrett Last Word Dial Lever-Style Variance Indicators
Half the dial face is white and the other half is yellow to make measurements easier to read. Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. The ratcheting contact point can be adjusted to various angles.