Static Control Curtains | McMaster-Carr

Filter by

Performance

Protects Against

Height

Color

Width

Clarity

Strip Color

Material

Thickness

Strip Width

REACH

Maximum Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

1C990

EAR99

Grommet Center-to-Center

Door Width

Strip Length

Door Height

Surface Resistivity

Shape

Strip Mount Type

Strip Texture

Flammability Rating

Strip Thickness

95 Products

Static-Control Curtains

The carbon fibers on one side of these curtains ground electrical charges to eliminate static.

Curtains

	Wd., ft.	Thk., mil	Wt., lb.	Surface Resistivity, ohm/sq.	Max. Temp., ° F	Grommet Location (Ctr.-to-Ctr.)	Clarity	Color	Flammability Rating		Each
Vinyl Plastic



	5	6	12	3	2× 10^7	120	Top (8")	Clear	Clear	NFPA 701	52365T52	000000


	5	8	12	4	2× 10^7	120	Top (8")	Clear	Clear	NFPA 701	52365T53	000000
	5	10	12	5	2× 10^7	120	Top (8")	Clear	Clear	NFPA 701	52365T54	000000
	6	6	12	4	2× 10^7	120	Top (8")	Clear	Clear	NFPA 701	52365T61	000000
	6	8	12	5	2× 10^7	120	Top (8")	Clear	Clear	NFPA 701	52365T62	000000
	6	10	12	6	2× 10^7	120	Top (8")	Clear	Clear	NFPA 701	52365T63	000000

Curtain Hooks

	Pkg. Qty.		Pkg.
Hooks	10	54895T44	000000

Made-to-Order

	Wt. per Sq. yd., oz.	Surface Resistivity, ohm/sq.	Max. Temp., ° F	Grommet Location (Ctr.-to-Ctr.)	Clarity	Color	Flammability Rating		Per Sq. Ft.
Vinyl Plastic



	12	14	2× 10^7	120	Top (8")	Clear	Clear	NFPA 701	52365T75	00000

Curtain Hooks

	Pkg. Qty.		Pkg.
Hooks	10	54895T44	000000

Static-Dissipative Strip Doors

Bolt-On Strip

Press-On Strip

Use these doors in data centers and other areas where static build-up could harm sensitive electronics. They allow personnel and vehicles to move freely through doorways while keeping heated or cooled air in and dirt, dust, and debris out. These strip doors consist of a mounting plate and vinyl strips. The strips overlap each other to prevent gaps and come in different widths. Narrow strips are easier to pass through while wider strips create a better seal.

Bolt-On Strip—Place strips on the threaded studs and use the included nuts to hold them securely in place.

Press-On Strip—Press strips onto pegs for quick installation.

				Strip								Mounting Plate
	Door Wd., ft.	Door Ht., ft.	No. of Strips	Texture	Overlap	Mounting Hole Ctr.-to-Ctr.	Clarity	Color	Surface Resistivity, ohm/sq.	For Use Outdoors	Temp. Range, ° F	Material	Mounting Fasteners Included	Mounting Hole Dia.		Each
Bolt-On Strip







				8" Wide × 0.08" Thick Strips

				3	7	6	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A21	0000000


				4	7	8	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A22	000000
				4	8	8	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A13	000000
				5	7	10	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A11	000000
				5	8	10	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A23	000000
				6	7	12	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A12	000000
				6	8	12	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A24	000000
				6	9	12	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A16	000000
				7	8	14	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A17	000000
				10	8	20	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A14	000000
				12	8	24	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A15	000000




						12" Wide × 0.12" Thick Strips

						8	8	12	Smooth	4"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A33	000000


						8	10	12	Smooth	4"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A34	00000000
						9	9	14	Smooth	4"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A35	00000000
						10	10	15	Smooth	4"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A36	00000000
						12	12	18	Smooth	4"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	1/2"	1814A37	00000000


						Press-On Strip







										8" Wide × 0.08" Thick Strips

										3	7	6	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	3/8"	8460A91	000000


										4	7	8	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	3/8"	8460A92	000000
										5	8	10	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	3/8"	8460A93	000000
										6	7	12	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	3/8"	8460A86	000000
										8	8	16	Smooth	2"	2"	Clear	Green	1× 10^6	No	0 to 150	Aluminum	No	3/8"	8460A95	000000

Static-Dissipative Door Strips

The holes are already punched in these strips for convenient installation. They're good for data centers and other areas where static build-up could harm sensitive electronics. Use them to replace worn strips or create custom strip doors.

	Strip
	Lg., ft.	Mounting Hole Dia.	Mounting Hole Ctr.-to-Ctr.	Material	Texture	Clarity	Surface Resistivity, ohm/sq.	For Use Outdoors	Temp. Range, ° F		Each
Green Strip







				8" Wd. × 0.08" Thick. Strips

				7	3/8"	2"	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1814A51	000000


				8	3/8"	2"	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1814A52	00000
				9	3/8"	2"	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1814A25	00000




						12" Wd. × 0.12" Thick. Strips

						8	3/8"	2"	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1814A63	00000


						9	3/8"	2"	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1814A64	00000
						10	3/8"	2"	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1814A65	00000
						12	3/8"	2"	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1814A66	00000

Static-Control PTFE-Coated Fiberglass Fabric Sheets

These sheets can be grounded to reduce static electricity. The PTFE coating makes them nonstick and chemical resistant.

Wd.	Thk.	Fabric Wt., oz/yd²	Max. Temp., ° F	Color	Choose a Length, ft.		Per Ft.
43 3/4"	0.0140"	21	500	Black	1, 3, 5, 10, 20, 25	8665K84	000000

Static-Dissipative Door Strip Rolls

Cut to the length you need with shears or a utility knife and punch holes for hanging. These door strip rolls are good for data centers and other areas where static build-up could harm sensitive electronics. Use them to replace worn strips or create custom strip doors.

		Strip
	Roll Lg., ft.	Material	Texture	Clarity	Surface Resistivity, ohm/sq.	For Use Outdoors	Temp. Range, ° F		Each
Green Strip







				8" Wd. × 0.08" Thick. Strips

				30	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1894A595	0000000


				75	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1894A46	000000
				150	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1894A59	000000




						12" Wd. × 0.12" Thick. Strips

						30	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1894A635	000000


						75	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1894A61	000000
						150	Vinyl Plastic	Smooth	Clear	1× 10^6	No	0 to 150	1894A63	000000

Router Guides

		Each
Stainless Steel Hole-Making Template	1139A11	000000

Blower Ionizers


With Filter 148 ft³/min Airflow	With Filter 255 ft³/min Airflow

With Filter 360 ft³/min Airflow	With Heater 150 ft³/min Airflow

Project a curtain-like stream of static-eliminating ionized air to protect against electrostatic discharge.

With Filter—Blowers with filters keep dust and dirt particles out of the airstream.

With Heater—Blowers with heaters reduce wind chill to moderate temperature.

			Static Control						Electrical
	Airflow, ft³/min	No. of Speeds	Wd.	Dp., ft.	Ht.	Wd.	Dp.	Voltage, V AC	Connection	No. of Blades	Cord Lg., ft.		Each
With Filter



		148	Variable	18"	10	7 3/4"	10 3/16"	9 3/8"	120	Straight Blade	3	6	2245K31	000000000


		255	Variable	24"	8	8 3/4"	14 1/8"	10"	120	Straight Blade	3	6	2245K43	00000000
		360	Variable	24"	10	7 1/2"	16 1/4"	13"	120/240	Straight Blade	3	7 1/2	2245K47	00000000


		With Heater



				150	3	36"	6	7 1/4"	14 1/8"	6 1/2"	120	Straight Blade	3	6	2245K49	00000000

Ionizer Stands

		Each
Floor Stand for 360 cfm Blower (50"-74" Ht.)	2245K48	000000000

Blower Ionizers for Large Areas

These blowers create an extra-wide field of ionized air to protect against electrostatic discharge in large areas. They can be suspended from a ceiling or mounted to a wall, floor, or machine frame.

			Static Control						Electrical
Airflow, ft³/min	No. of Speeds	No. of Fans	Wd.	Dp., ft.	Ht.	Wd.	Dp.	Voltage, V AC	Connection	No. of Blades	Cord Lg., ft.		Each



	105	Variable	1	14"	8	3 9/16"	20"	5 3/8"	120	Straight Blade	3	6 1/2	2241K49	000000000


	210	Variable	2	24"	8	3 9/16"	30"	5 3/8"	120	Straight Blade	3	6 1/2	2241K51	00000000
	315	Variable	3	34"	8	3 9/16"	40"	5 3/8"	120	Straight Blade	3	6 1/2	2241K53	00000000
	524	Variable	5	54"	8	3 9/16"	60"	5 3/8"	120	Straight Blade	3	6 1/2	2241K55	00000000

Ionizer Filters

	Pkg. Qty.		Pkg.
Air Filters	10	2241K57	000000

High-Efficiency Static-Eliminating Air Knives

These produce the same airflow as standard static-eliminating air knives but are quieter and use 18% less compressed air. They have an ionizing bar that temporarily neutralizes static to protect against ESD (electrostatic discharge). Air knives create a sheet of high-velocity air for drying and cooling parts, wiping conveyor belts, controlling coating depth, and blowing liquids, chips, and dust from equipment. They conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure and OSHA 29 CFR 1910.95 requirements for noise.

A power supply (sold separately) is required.

Air knives can be mounted with a positioning arm or mounting bracket (sold separately).

4 5/8" Overall Width—Knives up to 4 _5/8" can be supported with rigid pipe connected to your air supply.

Volume (Sound)—Volume (sound) is measured 3 ft. from the air knife.

Air Knife Shim Sets—Air knife shim sets (sold separately) install in the airflow slot to adjust the flow and force of air.

	Air Knives																Air Knife Shim Sets
	Airflow				Overall					Air Inlet
	Slot Wd.	Slot Dp.	Air Consumption @ Pressure	Volume (Sound), dBA	Wd.	Ht.	Dp.	Max. Temp., ° F	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Static Neutralizing Distance	Specs. Met		Each		Each
Aluminum



		3"	0.002"	10.5 ft³/min @ 100 psi	72	4 5/8"	1 7/8"	2 1/4"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	6101K41	0000000	6069K51	000000


		6"	0.002"	21 ft³/min @ 100 psi	72	7 5/8"	1 7/8"	2 1/4"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	6101K42	000000	6069K52	00000
		12"	0.002"	42 ft³/min @ 100 psi	72	13 5/8"	1 7/8"	2 1/4"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	6101K43	000000	6069K53	00000
		18"	0.002"	63 ft³/min @ 100 psi	72	19 5/8"	1 7/8"	2 1/4"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	6101K44	00000000	6069K54	00000
		24"	0.002"	84 ft³/min @ 100 psi	72	25 5/8"	1 7/8"	2 1/4"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	6101K45	00000000	6069K55	00000
		36"	0.002"	126 ft³/min @ 100 psi	72	37 5/8"	1 7/8"	2 1/4"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	6101K46	00000000	6069K57	00000

Accessories and Replacements for Air Knives

Supplies

These power supplies have two ports for connecting up to two air knives.

Overall				First Port Mounting Holes		Second Port Mounting Holes			First Port		Second Port
Wd.	Ht.	Dp.	Mounting Hole Dia.	No. of	Ctr.-to-Ctr.	No. of	Ctr.-to-Ctr.	Housing Material	Electrical Connection	Voltage, V AC	Electrical Connection	Voltage, V AC		Each
4"	3 7/16"	6"	1/4", 9/32"	4	2 7/8"	4	5 3/8"	Steel	Plug In	120	Hardwire	230	52555K35	0000000

Max. Projection	For Mounting Hole Thread Size	Mounting Fasteners Included	Features		Each
31"	1/2"-13	Yes	Two Locking Swivels	5191K31	0000000

Overall
5"	1"	1"	Yes	5191K315	000000

Replacement Ionizers

For Airflow Slot Wd.	Includes		Each
3"	5 ft. Lg. Cable	52555K81	0000000
6"	5 ft. Lg. Cable	52555K82	000000
12"	5 ft. Lg. Cable	52555K83	000000
18"	5 ft. Lg. Cable	52555K84	000000
24"	5 ft. Lg. Cable	52555K85	000000
36"	5 ft. Lg. Cable	52555K86	000000

		Each
Air Filter/Regulator for 3", 6", 12", and 18" Air Slot Widths	60115K401	0000000
Air Filter/Regulator for 24" and 36" Air Slot Widths	60115K46	000000

Static-Eliminating Air Knives

An ionizing bar temporarily neutralizes static to protect against ESD (electrostatic discharge). Air knives create a sheet of high-velocity air for drying and cooling parts, wiping conveyor belts, controlling coating depth, and blowing liquids, chips, and dust from equipment. They conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure and OSHA 29 CFR 1910.95 requirements for noise.

A power supply (sold separately) is required.

Air knives can be mounted with a positioning arm or mounting bracket (sold separately).

4 5/8" Overall Width—Knives up to 4 _5/8" can be supported with rigid pipe connected to your air supply.

Volume (Sound)—Volume (sound) is measured 3 ft. from the air knife.

Air Knife Shim Sets—Air knife shim sets (sold separately) install in the airflow slot to adjust the flow and force of air.

	Air Knives																Air Knife Shim Sets
	Airflow				Overall					Air Inlet
	Slot Wd.	Slot Dp.	Air Consumption @ Pressure	Volume (Sound), dBA	Wd.	Ht.	Dp.	Max. Temp., ° F	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Static Neutralizing Distance	Specs. Met		Each		Each
Aluminum



		3"	0.002"	12.3 ft³/min @ 100 psi	86	4 5/8"	1 5/8"	1 3/8"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	52555K71	0000000	5191K83	000000


		6"	0.002"	24.6 ft³/min @ 100 psi	86	7 5/8"	1 5/8"	1 3/8"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	52555K72	000000	5191K36	00000
		12"	0.002"	49.2 ft³/min @ 100 psi	86	13 5/8"	1 5/8"	1 3/8"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	52555K73	000000	5191K37	00000
		18"	0.002"	73.8 ft³/min @ 100 psi	86	19 5/8"	1 5/8"	1 3/8"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	52555K74	000000	5191K39	00000
		24"	0.002"	98.4 ft³/min @ 100 psi	86	25 5/8"	1 5/8"	1 3/8"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	52555K75	00000000	5191K38	00000
		36"	0.002"	147.6 ft³/min @ 100 psi	86	37 5/8"	1 5/8"	1 3/8"	165	250	1/4	NPT	Female	6" to 20 ft.	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	52555K76	00000000	5191K43	00000

Accessories and Replacements for Air Knives

Supplies

These power supplies have two ports for connecting up to two air knives.

Overall				First Port Mounting Holes		Second Port Mounting Holes			First Port		Second Port
Wd.	Ht.	Dp.	Mounting Hole Dia.	No. of	Ctr.-to-Ctr.	No. of	Ctr.-to-Ctr.	Housing Material	Electrical Connection	Voltage, V AC	Electrical Connection	Voltage, V AC		Each
4"	3 7/16"	6"	1/4", 9/32"	4	2 7/8"	4	5 3/8"	Steel	Plug In	120	Hardwire	230	52555K35	0000000

Max. Projection	For Mounting Hole Thread Size	Mounting Fasteners Included	Features		Each
31"	1/2"-13	Yes	Two Locking Swivels	5191K31	0000000

Overall
5"	1"	1"	Yes	5191K315	000000

Replacement Ionizers

For Airflow Slot Wd.	Includes		Each
3"	5 ft. Lg. Cable	52555K81	0000000
6"	5 ft. Lg. Cable	52555K82	000000
12"	5 ft. Lg. Cable	52555K83	000000
18"	5 ft. Lg. Cable	52555K84	000000
24"	5 ft. Lg. Cable	52555K85	000000
36"	5 ft. Lg. Cable	52555K86	000000

		Each
Air Filter/Regulator for 3", 6", 12", and 18" Air Slot Widths	60115K401	0000000
Air Filter/Regulator for 24" and 36" Air Slot Widths	60115K46	000000

Workstation Ionizers with Fan


With Swivels	With Heater	With Quiet Mode	Articulating Arms

Spread the range of static control further than ionizers without a fan. Small enough to fit on your desktop, these create an ionized field across your immediate workspace to protect against electrostatic discharge.

With Heater—Ionizers with a heater offer an optional warm airflow for comfort in cool areas.

With Quiet Mode—Ionizers with a quiet mode have a slower fan speed than other ionizers and are often used in small-parts and soldering applications. They’re also suitable for use in clean rooms rated to both Federal Standard and ISO classes.

Articulating Arms—Use the articulating arms for positioning the ionizers.

	Ionizers														Articulating Arms
			Static Control						Electrical
	Airflow, ft³/min	No. of Speeds	Wd.	Dp.	Ht.	Wd.	Dp.	Voltage	Connection	No. of Blades	Clean Room Std.	Cord Lg., ft.		Each		Each
With Swivels



		42	2	12"	36"	5 3/8"	3 7/8"	2 3/8"	120V AC	Straight Blade	3	—	7	2240K66	0000000	2240K8	0000000


		With Heater



				129	3	12"	48"	9 1/8"	6 13/16"	3 5/16"	120V AC	Straight Blade	3	—	7	2240K78	00000000	2240K8	000000


				With Quiet Mode



						129	4	12"	60"	7 5/16"	5 1/8"	2 3/8"	24V DC	Straight Blade	3	Fed. Std. Class 10, ISO Class 4	7	2240K79	000000	2240K8	000000

Replacement Ionizer Filters


Replacement Filters	Replacement Filter Kits

The replacement filter kits contain one filter retainer, which holds a filter in place, and one filter.

Component	For Airflow, ft³/min	Includes		Each
Replacement Filters	129	—	2240K84	00000
Replacement Filter Kit	129	1 Filter Retainer, 1 Replacement Filter	2240K83	00000