About Precision Flow-Adjustment Valves
More
High-Temperature Threaded Precision Flow-Adjustment Valves
- Valve Type: Needle
- For Use With: Water, Oil, Air, Steam
Rated for nearly twice the maximum temperature of standard threaded precision flow-adjustment valves, these can handle up to 700° F. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Body is 316 stainless steel for excellent corrosion resistance. Valves have metal-to-metal seats that resist temperature fluctuations. All have a nut that can be tightened to compress the packing if it leaks.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
316 Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
| 1/4 | 0.82 | 6000 psi @ 100° F | 4900 psi @ 700° F | -65° to 700° | 2 1/16" | 0000000 | 0000000 |
| 3/8 | 1.31 | 6000 psi @ 100° F | 4900 psi @ 700° F | -65° to 700° | 2 5/8" | 0000000 | 000000 |
| 1/2 | 1.31 | 6000 psi @ 100° F | 4900 psi @ 700° F | -65° to 700° | 3" | 0000000 | 000000 |
| 3/4 | 2.67 | 6000 psi @ 100° F | 4900 psi @ 700° F | -65° to 700° | 3 1/4" | 0000000 | 000000 |
| 1 | 2.67 | 6000 psi @ 100° F | 3500 psi @ 700° F | -65° to 700° | 3 5/8" | 0000000 | 000000 |
Precision Flow-Adjustment Valves with Solder-Connect Fittings
- Valve Type: Needle
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Steam, Xenon
Solder these valves to tubing for a permanent, leak-tight connection. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have a 316 stainless steel body for excellent corrosion resistance. All have metal-to-metal seats that resist temperature fluctuations. They have a nut that can be tightened to compress the packing if it leaks.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
316 Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
Solder Connect × Solder Connect | |||||||
| 3/8" | 0.94 | 6000 psi @ 100° F | 4900 psi @ 700° F | -65° to 700° | 2 1/4" | 0000000 | 0000000 |
| 1/2" | 1.31 | 6000 psi @ 100° F | 4900 psi @ 700° F | -65° to 700° | 2 1/2" | 0000000 | 000000 |
Threaded Precision Flow-Adjustment Valves for Steam
- Valve Type: Needle
- For Use With: Steam
- Specifications Met: MSS-SP-80
Use these valves in applications with steam pressure up to 200 psi @ 450° F. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have metal-to-metal seats that resist temperature fluctuations. All have a nut that can be tightened to compress the packing if it leaks.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | End-to-End Lg. | Port-to-Port Lg. | Each | |
Bronze Body—Straight | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||
| 1/8 | 0.16 | 400 psi @ 150° F | 200 psi @ 450° F | -20° to 450° | 1 3/16" | __ | 0000000 | 0000000 |
| 1/4 | 0.37 | 400 psi @ 150° F | 200 psi @ 450° F | -20° to 450° | 1 9/16" | __ | 0000000 | 000000 |
| 3/8 | 0.51 | 400 psi @ 150° F | 200 psi @ 450° F | -20° to 450° | 1 13/16" | __ | 0000000 | 000000 |
| 1/2 | 1.09 | 400 psi @ 150° F | 200 psi @ 450° F | -20° to 450° | 2" | __ | 0000000 | 000000 |
| 3/4 | 2.25 | 400 psi @ 150° F | 200 psi @ 450° F | -20° to 450° | 2 5/16" | __ | 0000000 | 000000 |
| 1 | 4.24 | 200 psi @ 450° F | 200 psi @ 450° F | -20° to 450° | 3 1/4" | __ | 0000000 | 000000 |
Bronze Body—90° Elbow | ||||||||
NPT Female × NPT Female | ||||||||
| 1/2 | 5.75 | 200 psi @ 450° F | 200 psi @ 450° F | -20° to 450° | __ | 1 1/16" | 0000000 | 000000 |
High-Pressure Threaded Precision Flow-Adjustment Valves for Steam
- Valve Type: Needle
- For Use With: Steam
- Seal Material: PTFE Plastic
To withstand a maximum steam pressure of at least 4,800 psi @ 355° F in applications such as petroleum refineries, these valves are machined from a single piece of metal for seamless construction. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valve body is 316 stainless steel for excellent corrosion resistance. Threads and a hex nut below the handle allow you to install these valves in instrument panels. All have metal-to-metal seats that resist temperature fluctuations. Valves have a nut that can be tightened to compress the packing if it leaks.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Panel Cutout Dia. | End-to-End Lg. | Each | |
316 Stainless Steel Body | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||
| 1/4 | 0.58 | 10000 psi @ 200° F | 6200 psi @ 355° F | -40° to 400° | 7/8" | 2 5/16" | 0000000 | 0000000 |
| 3/8 | 0.58 | 10000 psi @ 200° F | 4800 psi @ 355° F | -40° to 400° | 7/8" | 2 5/16" | 0000000 | 000000 |
| 1/2 | 0.6 | 10000 psi @ 200° F | 4800 psi @ 355° F | -40° to 400° | 1" | 2 5/8" | 0000000 | 000000 |
Precision Flow-Adjustment Valves with Sanitary
Quick-Clamp Fittings for Clean Steam
- Valve Type: Needle
- For Use With: Air, Carbon Dioxide, Clean Liquids, Deionized Water, Nitrogen, Steam, Water
- Seal Material: PTFE Plastic
Often used in sterilization applications with clean steam, these valves are electropolished to a 16 Ra finish for smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have a 316L stainless steel body for excellent corrosion resistance.
| For Tube OD | Flange OD | Max. Pressure | Max. Temperature, °F | End-to-End Lg. | Interior Smoothness, Ra | Each | |
316L Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
Quick Clamp × Quick Clamp | |||||||
| 1/4" | 0.984" | 120 psi @ 300° F | 300° | 4" | 16 | 0000000 | 0000000 |
| 3/8" | 0.984" | 120 psi @ 300° F | 300° | 4" | 16 | 0000000 | 000000 |
| 1/2" | 0.984" | 120 psi @ 300° F | 300° | 4" | 16 | 0000000 | 000000 |
| 3/4" | 0.984" | 120 psi @ 300° F | 300° | 4" | 16 | 0000000 | 000000 |
| 1" | 1.984" | 120 psi @ 300° F | 300° | 4 1/2" | 16 | 0000000 | 000000 |
| 1 1/2" | 1.984" | 120 psi @ 300° F | 300° | 5 1/2" | 16 | 0000000 | 000000 |
| 2" | 2.516" | 120 psi @ 300° F | 300° | 6 1/4" | 16 | 0000000 | 000000 |
Precision Flow-Adjustment Valves with Yor-Lok Fittings for Steam
- Valve Type: Needle
- For Use With: Steam
- Seal Material: PTFE Plastic
For extra gripping power and a strong seal, these valves have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves are often used in petroleum refineries. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Body is 316 stainless steel for excellent corrosion resistance. For installation in instrument panels, valves have threads and a hex nut below the handle. They have metal-to-metal seats that resist temperature fluctuations. All have a nut that can be tightened to compress the packing if it leaks.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| For Tube ID | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Panel Cutout Dia. | End-to-End Lg. | Each | |
316 Stainless Steel Body | ||||||||
|---|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | ||||||||
| 1/16" | 1/4" | 0.6 | 10000 psi @ 200° F | 6200 psi @ 355° F | 7/8" | 2 7/8" | 0000000 | 0000000 |
| 1/16" | 3/8" | 0.6 | 10000 psi @ 200° F | 4800 psi @ 355° F | 7/8" | 2 7/8" | 0000000 | 000000 |
| 1/16" | 1/2" | 0.6 | 10000 psi @ 200° F | 4800 psi @ 355° F | 7/8" | 3 1/8" | 0000000 | 000000 |