McMaster-Carr

The galvannealed coating allows these steel sheets to be painted without prepping the surface. They're easier to weld and more scratch resistant than zinc-galvanized steel sheets. Use them for outdoor signs, cabinets, and doors.

Mold- and Mildew-Resistant
Low-Carbon Steel Sheets

A silver-filled resin coating on one side of these sheets protects from degradation caused by bacteria and fungi.

High-Temperature Aluminized
Low-Carbon Steel Sheets

Coated with an aluminum-silicon alloy, these sheets resist corrosion while withstanding long-term exposure to high temperatures. Use in drying ovens, furnaces, and smokestacks.

Low-Carbon Steel Rods and Discs

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Chrome-Plated
Low-Carbon Steel Rods

The matte plating on these rods increases corrosion resistance and wear resistance.

Tight-Tolerance
Low-Carbon Steel Rods

These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in a lathe.

Zinc-Galvanized
Low-Carbon Steel Rods

These rods are zinc galvanized for good corrosion resistance.

Low-Carbon Steel Rectangular Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Round Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel 90° Angles

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Zinc-Galvanized Low-Carbon
Steel 90° Angles

These 90° angles are zinc galvanized for good corrosion resistance.

Low-Carbon Steel U-Channels

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Hex Bars

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Balls

Also known as mild steel, use these low-carbon steel balls in parts that don't require high strength.

Low-Carbon Steel Half-Rounds

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Wire

Also known as black-annealed wire.

Zinc-Galvanized Steel Wire

This wire is zinc galvanized for good corrosion resistance.

PVC-Coated Steel Wire

Coated with PVC for corrosion resistance, this carbon steel wire will stand up to outdoor use.

Low-Carbon Steel Half-Ovals

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel T-Bars

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Easy-to-Machine Carbon Steel

Tight-Tolerance Ultra-Machinable
12L14 Carbon Steel Rods

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

Ultra-Machinable 12L14
Carbon Steel Rods

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Ultra-Machinable 12L14
Carbon Steel Bars

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Ultra-Machinable 12L14
Carbon Steel Hex Bars

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Easy-to-Machine 1215
Carbon Steel Rods

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Tight-Tolerance Easy-to-Machine
1215 Carbon Steel Rods

Precision ground and held to a strict tightness tolerance, these rods are ready for turning in a lathe.

Easy-to-Machine 1215
Carbon Steel Bars

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Easy-to-Machine 1215
Carbon Steel Hex Bars

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

High-Strength Easy-to-Machine
1144 Carbon Steel Rods

Often called Stressproof, these rods are stress-relieved to minimize warping during machining.

Tight-Tolerance High-Strength
Easy-to-Machine 1144
Carbon Steel Rods

These rods are precision ground and held to a strict straightness tolerance, so they're all set for turning applications in your lathe.

Ultra-Strength Easy-to-Machine
1144 Carbon Steel Rods

Also known as Fatigueproof, these rods have enhanced strength and resistance to breaking from repeated impact compared to High-Strength Easy-to-Machine 1144 Carbon Steel Rods.

Easy-to-Machine 1117 Carbon Steel

1117 carbon steel responds to surface-hardening heat treatment better than other easy-to-machine carbon steels. Use it to fabricate shaft couplings, studs, pins, and universal joints.

High-Strength 1045 Carbon Steel

High-Strength 1045 Carbon
Steel Rods and Discs

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

High-Strength 1045 Carbon Steel Bars

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

Wear-Resistant AR400 Carbon Steel

The nickel and molybdenum content gives AR400 carbon steel the ability to resist wear better than all other carbon steel. It's often used as wear strips, liners, and deflector plates.

Ultra-Strength Carbon Steel

Ultra-Strength Carbon
Steel (UHSS) Sheets

This UHSS (ultra high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.

Ultra-Strength Carbon Steel
(AHSS) Round Tubes

The same steel used in automobile bodies, this AHSS (advanced high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.

Impact-Resistant A516 Carbon Steel

Even in low temperatures, A516 carbon steel resists breaking upon impact. Also known as pressure-vessel-quality (PVQ) steel, it is mostly used for boilers, storage tanks, and pressure vessels.

Ultra-Wear-Resistant AR500 Carbon Steel

Ultra-Wear-Resistant
AR500 Carbon Steel

Exceptional hardness makes AR500 carbon steel more resistant to wear and impact than other carbon steel.

Alloy Steel

Tight-Tolerance Hardened
Multipurpose 4140 Alloy
Steel Sheets and Bars

Also known as flat stock, the thickness on these sheets and bars is held to a tight tolerance.

Oversized Hardened Multipurpose
4140 Alloy Steel Bars

Because the thickness is oversized, you can finish these bars to your exact requirements.

Hardened Multipurpose
4140 Alloy Steel Bars

These sheets and bars are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.

Multipurpose 4140 Alloy Steel Bars

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Oversized Multipurpose
4140 Alloy Steel Sheets

The thickness is oversized for finishing to your exact requirements.

Multipurpose 4140 Alloy
Steel Rods and Discs

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Hardened Multipurpose
4140 Alloy Steel Rods

These rods are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.

Chrome-Plated Hardened
Multipurpose 4140 Alloy Steel Rods

The chrome plating on these rods increases corrosion resistance.

Tight-Tolerance Multipurpose
4140 Alloy Steel Rods

Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance.

High-Strength Multipurpose
4140 Alloy Steel Rods

Often called ETD-150, these rods are made from a modified version of 4140 alloy steel and have been drawn at high temperatures for excellent strength.

Multipurpose 4140 Alloy Steel Tubes

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Hardened Multipurpose
4140 Alloy Steel Hex Bars

These hex bars are hardened for increased abrasion and impact resistance. They are also stress relieved to reduce the chance of warping during machining.

Multipurpose 4140
Alloy Steel Hex Bars

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Easy-to-Weld 4130
Alloy Steel Round Tubes

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Easy-to-Weld 4130 Alloy Steel
Round Tubes with Certification

All come with a traceable lot number and test report.

Easy-to-Weld 4130 Alloy
Steel Sheets and Bars

4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.

Easy-to-Weld 4130 Alloy
Steel Rectangular Tubes

4130 alloy steel has a low carbon content that provides good weldability. It's often used for structural applications.

Easy-to-Weld 4130 Alloy Steel Rods

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Hard Wear-Resistant
52100 Alloy Steel Balls

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

Tight-Tolerance Hard Wear-Resistant
52100 Alloy Steel Balls

The diameter on these balls is held to a precise tolerance.

Hard Wear-Resistant
52100 Alloy Steel Rods

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. It’s used for parts such as bearings, bushings, and punches.

High-Strength 4340 Alloy Steel Rods

Use for power transmission and structural applications that involve extreme impact, heat, and wear.

Fatigue-Resistant High-Strength
300M Alloy Steel Rods

A modified version of 4340 alloy steel, 300M is used in applications that require high yield strength, such as torsion bars and drive shafts.

Easy-to-Weld Wear-Resistant
8620 Alloy Steel

While the low carbon content makes 8620 alloy steel easy-to-weld, it's the nickel, chromium, and molybdenum content that provides wear resistance.

Hardened High-Strength
A514 Alloy Steel

Heat treated for enhanced hardness and strength, A514 alloy steel is suitable for structural applications and supporting heavy loads.

Easy-to-Machine 41L40 Alloy Steel

The addition of lead gives 41L40 the best machinability of all the alloy steel we offer.

Wear-Resistant 4150 Alloy Steel

Often used for gears, shafts, and ball screws, 4150 alloy steel resists wear from friction and abrasion.

High-Strength C300 Alloy Steel

Offering excellent resistance to cracking from impact and compression, C300 alloy steel is often used for dies and tooling. It is also known as maraging steel and VascoMax.

Fatigue-Resistant 9310 Alloy Steel

A vacuum arc remelting (VAR) casting process gives 9310 superior strength, hardness, and fatigue resistance over other types of alloy steel. It's often machined into heavy duty gears, clutch parts, and ratchets.

Corrosion-Resistant A588 Alloy Steel

Also known as weathering steel, this high-strength steel develops a thin layer of rust over time in outdoor environments that protects the inner steel from corrosion.

Easy-to-Weld A572 Alloy
Steel Sheets and Bars

Combining strength with weldability and formability, A572 alloy steel is an economical choice for structural components, such as channels, beams, and framing. It has a low carbon content, making it easy to weld with a variety of welding methods.

Spring Steel

Wear-Resistant 1095 Spring
Steel Sheets and Strips

Also known as blue-tempered steel.

Easy-to-Form Wear-Resistant
1095 Spring Steel Sheets

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

Easy-to-Form Wear-Resistant 1095
Spring Steel Sheets with Certification

All come with a traceable lot number and test report.

1075 Spring Steel Strips

Also known as scaleless blue steel.

Easy-to-Form 1075
Spring Steel Sheets

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

Easy-to-Form 1075 Spring
Steel Sheets with Certification

Each sheet comes with a traceable lot number and test report.

Stress-Resistant 5160 Alloy Steel

5160 alloy steel handles repeated cycles of stress without breaking just like spring steel. It’s often used to make flat springs.

Lubricated 1080 Spring Steel Wire

Also known as music wire.

Lubricated 1065 Spring Steel Wire

This wire is coated with oil for corrosion resistance and lubricity. Use it for bundling and as tag wire.

Lubricated 1065 Spring
Steel Wire Assortments

Always have the right size wire on hand with a 72-piece assortment.

Cast Iron

Easy-to-Machine
Gray Cast Iron Tubes

Gray cast iron machines faster with less wear on cutting tools than most types of steel. It's often fabricated into gears, pulleys, rollers, and bushings.

Oversized Easy-to-Machine
Gray Cast Iron Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Oversized Tight-Tolerance
Easy-to-Machine Gray Cast Iron Rods

Precision ground to a tight diameter tolerance, these rods are ready for turning in your lathe.

Easy-to-Machine Gray
Cast Iron Sheets and Bars

Gray cast iron machines faster with less wear on cutting tools than most types of steel. It's often fabricated into gears, pulleys, and bushings.

Impact-Resistant Ductile
Cast Iron Rods and Discs

Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking.

Impact-Resistant
Ductile Cast Iron Bars

Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking.

Multipurpose Air-Hardening A2 Tool Steel

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool
Steel Sheets and Bars

These sheets and bars are precision ground to a tight thickness tolerance.

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel
Bars with Certification

All of these bars come with a traceable lot number and test report. They're precision ground to a tight thickness tolerance.

Oversized Multipurpose Air-Hardening
A2 Tool Steel Sheets and Bars

The thickness, length, and width are oversized for finishing to your exact requirements.

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel Rods

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel
Rods with Certification

All come with a traceable lot number and test report. These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in your lathe.

Oversized Multipurpose Air-Hardening
A2 Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Hardened
Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel Rods

Hardened for increased abrasion and impact resistance, these rods are precision ground with a tight diameter tolerance.

Multipurpose Oil-Hardening O1 Tool Steel

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool
Steel Sheets and Bars

These precision-ground sheets and bars are held to a tight thickness tolerance.

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel
Bars with Certification

All come with a traceable lot number and test report. The thickness on these bars is precision ground and held to a tight tolerance.

Oversized Multipurpose
Oil-Hardening O1 Tool Steel Bars

With an oversized thickness, length, and width, these bars can be finished to your exact requirements.

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel Rods

Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance.

Oversized Multipurpose Oil-Hardening
O1 Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Hardened
Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel Rods

Hardened for increased abrasion and impact resistance, these precision-ground rods have a tight diameter tolerance and are ready for turning in your lathe.

High-Speed Tool Steel

Hardened Undersized
High-Speed M2 Tool Steel Rods

These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.

Hardened Undersized High-Speed
M2 Tool Steel Rod Sets

These rod sets are supplied in a metal index case with fold-out panels.

Hardened Oversized
High-Speed M2 Tool Steel Rods

Also known as reamer blanks, these rods are hardened for increased abrasion and impact resistance.

Oversized High-Speed
M2 Tool Steel Rods

An oversized diameter allows for finishing to your exact requirements.

Tight-Tolerance High-Speed
M2 Tool Steel Rods

Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.

Hardened High-Speed
M2 Tool Steel Sheets

Hardened for increased abrasion and impact resistance.

Tight-Tolerance High-Speed
M2 Tool Steel Bars

These bars are precision ground to a tight thickness tolerance.

Hardened High-Speed M42 Tool Steel

Also known as cobalt steel, this M42 tool steel maintains its hardness in high-speed cutting applications that generate intense heat. Use it to make tools for cutting extremely hard materials.

Wear-Resistant High-Speed
M4 Tool Steel Bars

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

Wear-Resistant High-Speed
M4 Tool Steel Rods

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

Easy-to-Machine W1 Tool Steel

Easy-to-Machine W1 Tool Steel Bars

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

Tight-Tolerance Easy-to-Machine
W1 Tool Steel Rods

Ground and held to strict diameter and straightness tolerances, these rods are ready to be turned in a lathe.

Wear-Resistant D2 Tool Steel

Tight-Tolerance Wear-Resistant
D2 Tool Steel Bars

The thickness on these bars is precision ground to a tight tolerance.

Oversized Wear-Resistant
D2 Tool Steel Bars

The thickness, length, and width are oversized for finishing to your exact requirements.

Oversized Wear-Resistant D2
Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Tight-Tolerance Wear-Resistant
D2 Tool Steel Rods

All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.

Shock-Resistant Tool Steel

Oversized Shock-Resistant
S7 Tool Steel Rods and Discs

An oversized diameter allows for finishing to your exact requirements.

Tight-Tolerance Shock-Resistant
S7 Tool Steel Rods

The diameter on these rods is precision ground while the straightness is held to a strict tolerance, so they're ready for turning in a lathe.

Oversized Shock-Resistant
S7 Tool Steel Bars

These bars have an oversized thickness, length, and width for finishing to your exact requirements.

Tight-Tolerance Shock-Resistant
S7 Tool Steel Bars

The thickness on these bars is precision ground to a tight tolerance.

Hardened Shock-Resistant
S2 Tool Steel

This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.

Hardened Easy-to-Machine P20 Tool Steel

Hardened Easy-to-Machine
P20 Tool Steel

Furnished hardened, P20 tool steel is strong and easy to machine. It has the wear resistance and highly polishable surface needed to fabricate long-lasting molds and dies.

High-Temperature H13 Tool Steel

Oversized High-Temperature
H13 Tool Steel Rods

An oversized diameter allows finishing to your exact requirements.

Oversized High-Temperature
H13 Tool Steel Bars

Oversized for finishing to your exact requirements.

Ultra-Wear-Resistant A11 Tool Steel

Resistant to wear, abrasion, and chipping, A11 is a hard material that is often made into punches and stamping tools.

Multipurpose Stainless Steel

Multipurpose 304 Stainless Steel

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Easy-to-Machine Multipurpose
304 Stainless Steel

When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

Polished Multipurpose
304 Stainless Steel

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Tight-Tolerance Multipurpose
304 Stainless Steel

This material has tighter tolerances than standard 304 stainless steel.

Multipurpose 304 Stainless
Steel with Certification

All come with a traceable lot number and test report.

Spring-Back Multipurpose
304 Stainless Steel Wire

This wire bounces back after bending. It’s often used to construct springs and wire rope.

304 Multipurpose Stainless
Steel Selector Packs

Compare the appearance choices of our 304 stainless steel with these convenient selector packs.

Hardened Multipurpose
304 Stainless Steel

Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.

Bend-and-Stay Multipurpose
304 Stainless Steel Wire

Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.

Textured Multipurpose
304 Stainless Steel

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

Tight-Tolerance Easy-to-Machine
303 Stainless Steel

This material has tighter tolerances than standard 303 stainless steel.

Easy-to-Machine 303 Stainless Steel

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Easy-to-Machine 303 Stainless
Steel with Certification

A traceable lot number and test report is furnished with each piece.

Tight-Tolerance Easy-to-Machine
303 Stainless Steel with Certification

In addition to having tight tolerances, this material comes with a traceable lot number and test report.

Fatigue-Resistant 301 Stainless Steel

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

Multipurpose Low-Carbon Steel

Low-Carbon Steel Sheets and Bars

Tight-ToleranceLow-Carbon Steel Bars

Low-Carbon Steel Barswith Rounded Edges

Zinc-Galvanized Low-CarbonSteel Sheets and Bars

Nickel-Coated Low-Carbon Steel Bars

Paintable GalvannealedLow-Carbon Steel Sheets

Mold- and Mildew-ResistantLow-Carbon Steel Sheets

High-Temperature AluminizedLow-Carbon Steel Sheets

Low-Carbon Steel Rods and Discs

Chrome-PlatedLow-Carbon Steel Rods

Tight-ToleranceLow-Carbon Steel Rods

Zinc-GalvanizedLow-Carbon Steel Rods

Low-Carbon Steel Rectangular Tubes

Low-Carbon Steel Round Tubes

Low-Carbon Steel 90° Angles

Zinc-Galvanized Low-CarbonSteel 90° Angles

Low-Carbon Steel U-Channels

Low-Carbon Steel Hex Bars

Low-Carbon Steel Balls

Low-Carbon Steel Half-Rounds

Low-Carbon Steel Wire

Zinc-Galvanized Steel Wire

PVC-Coated Steel Wire

Low-Carbon Steel Half-Ovals

Low-Carbon Steel T-Bars

Easy-to-Machine Carbon Steel

Tight-Tolerance Ultra-Machinable12L14 Carbon Steel Rods

Ultra-Machinable 12L14Carbon Steel Rods

Ultra-Machinable 12L14Carbon Steel Bars

Ultra-Machinable 12L14Carbon Steel Hex Bars

Easy-to-Machine 1215Carbon Steel Rods

Tight-Tolerance Easy-to-Machine1215 Carbon Steel Rods

Easy-to-Machine 1215Carbon Steel Bars

Easy-to-Machine 1215Carbon Steel Hex Bars

High-Strength Easy-to-Machine1144 Carbon Steel Rods

Tight-Tolerance High-StrengthEasy-to-Machine 1144 Carbon Steel Rods

Ultra-Strength Easy-to-Machine1144 Carbon Steel Rods

Easy-to-Machine 1117 Carbon Steel

High-Strength 1045 Carbon Steel

High-Strength 1045 CarbonSteel Rods and Discs

High-Strength 1045 Carbon Steel Bars

Wear-Resistant AR400 Carbon Steel

Wear-Resistant AR400 Carbon Steel

Ultra-Strength Carbon Steel

Ultra-Strength CarbonSteel (UHSS) Sheets

Ultra-Strength Carbon Steel(AHSS) Round Tubes

Impact-Resistant A516 Carbon Steel

Impact-Resistant A516 Carbon Steel

Ultra-Wear-Resistant AR500 Carbon Steel

Ultra-Wear-ResistantAR500 Carbon Steel

Alloy Steel

Tight-Tolerance HardenedMultipurpose 4140 Alloy Steel Sheets and Bars

Oversized Hardened Multipurpose4140 Alloy Steel Bars

Hardened Multipurpose4140 Alloy Steel Bars

Multipurpose 4140 Alloy Steel Bars

Oversized Multipurpose4140 Alloy Steel Sheets

Multipurpose 4140 AlloySteel Rods and Discs

Hardened Multipurpose4140 Alloy Steel Rods

Chrome-Plated HardenedMultipurpose 4140 Alloy Steel Rods

Tight-Tolerance Multipurpose4140 Alloy Steel Rods

High-Strength Multipurpose4140 Alloy Steel Rods

Multipurpose 4140 Alloy Steel Tubes

Hardened Multipurpose4140 Alloy Steel Hex Bars

Multipurpose 4140Alloy Steel Hex Bars

Easy-to-Weld 4130Alloy Steel Round Tubes

Easy-to-Weld 4130 Alloy SteelRound Tubes with Certification

Easy-to-Weld 4130 AlloySteel Sheets and Bars

Easy-to-Weld 4130 AlloySteel Rectangular Tubes

Easy-to-Weld 4130 Alloy Steel Rods

Hard Wear-Resistant52100 Alloy Steel Balls

Tight-Tolerance Hard Wear-Resistant52100 Alloy Steel Balls

Hard Wear-Resistant52100 Alloy Steel Rods

High-Strength 4340 Alloy Steel Rods

Fatigue-Resistant High-Strength300M Alloy Steel Rods

Easy-to-Weld Wear-Resistant8620 Alloy Steel

Hardened High-StrengthA514 Alloy Steel

Easy-to-Machine 41L40 Alloy Steel

Wear-Resistant 4150 Alloy Steel

High-Strength C300 Alloy Steel

Tight-Tolerance
Low-Carbon Steel Bars

Low-Carbon Steel Bars
with Rounded Edges

Zinc-Galvanized Low-Carbon
Steel Sheets and Bars

Paintable Galvannealed
Low-Carbon Steel Sheets

Mold- and Mildew-Resistant
Low-Carbon Steel Sheets

High-Temperature Aluminized
Low-Carbon Steel Sheets

Chrome-Plated
Low-Carbon Steel Rods

Tight-Tolerance
Low-Carbon Steel Rods

Zinc-Galvanized
Low-Carbon Steel Rods

Zinc-Galvanized Low-Carbon
Steel 90° Angles

Tight-Tolerance Ultra-Machinable
12L14 Carbon Steel Rods

Ultra-Machinable 12L14
Carbon Steel Rods

Ultra-Machinable 12L14
Carbon Steel Bars

Ultra-Machinable 12L14
Carbon Steel Hex Bars

Easy-to-Machine 1215
Carbon Steel Rods

Tight-Tolerance Easy-to-Machine
1215 Carbon Steel Rods

Easy-to-Machine 1215
Carbon Steel Bars

Easy-to-Machine 1215
Carbon Steel Hex Bars

High-Strength Easy-to-Machine
1144 Carbon Steel Rods

Tight-Tolerance High-Strength
Easy-to-Machine 1144
Carbon Steel Rods

Ultra-Strength Easy-to-Machine
1144 Carbon Steel Rods

High-Strength 1045 Carbon
Steel Rods and Discs

Ultra-Strength Carbon
Steel (UHSS) Sheets

Ultra-Strength Carbon Steel
(AHSS) Round Tubes

Ultra-Wear-Resistant
AR500 Carbon Steel

Tight-Tolerance Hardened
Multipurpose 4140 Alloy
Steel Sheets and Bars

Oversized Hardened Multipurpose
4140 Alloy Steel Bars

Hardened Multipurpose
4140 Alloy Steel Bars

Oversized Multipurpose
4140 Alloy Steel Sheets

Multipurpose 4140 Alloy
Steel Rods and Discs

Hardened Multipurpose
4140 Alloy Steel Rods

Chrome-Plated Hardened
Multipurpose 4140 Alloy Steel Rods

Tight-Tolerance Multipurpose
4140 Alloy Steel Rods

High-Strength Multipurpose
4140 Alloy Steel Rods

Hardened Multipurpose
4140 Alloy Steel Hex Bars

Multipurpose 4140
Alloy Steel Hex Bars

Easy-to-Weld 4130
Alloy Steel Round Tubes

Easy-to-Weld 4130 Alloy Steel
Round Tubes with Certification

Easy-to-Weld 4130 Alloy
Steel Sheets and Bars

Easy-to-Weld 4130 Alloy
Steel Rectangular Tubes

Hard Wear-Resistant
52100 Alloy Steel Balls

Tight-Tolerance Hard Wear-Resistant
52100 Alloy Steel Balls

Hard Wear-Resistant
52100 Alloy Steel Rods

Fatigue-Resistant High-Strength
300M Alloy Steel Rods

Easy-to-Weld Wear-Resistant
8620 Alloy Steel

Hardened High-Strength
A514 Alloy Steel

Easy-to-Weld A572 Alloy
Steel Sheets and Bars

Wear-Resistant 1095 Spring
Steel Sheets and Strips

Easy-to-Form Wear-Resistant
1095 Spring Steel Sheets

Easy-to-Form Wear-Resistant 1095
Spring Steel Sheets with Certification

Easy-to-Form 1075
Spring Steel Sheets

Easy-to-Form 1075 Spring
Steel Sheets with Certification

Lubricated 1065 Spring
Steel Wire Assortments

Easy-to-Machine
Gray Cast Iron Tubes

Oversized Easy-to-Machine
Gray Cast Iron Rods and Discs

Oversized Tight-Tolerance
Easy-to-Machine Gray Cast Iron Rods

Easy-to-Machine Gray
Cast Iron Sheets and Bars

Impact-Resistant Ductile
Cast Iron Rods and Discs

Impact-Resistant
Ductile Cast Iron Bars

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool
Steel Sheets and Bars

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel
Bars with Certification

Oversized Multipurpose Air-Hardening
A2 Tool Steel Sheets and Bars

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel Rods

Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel
Rods with Certification

Oversized Multipurpose Air-Hardening
A2 Tool Steel Rods and Discs

Hardened
Tight-Tolerance Multipurpose
Air-Hardening A2 Tool Steel Rods

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool
Steel Sheets and Bars

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel
Bars with Certification

Oversized Multipurpose
Oil-Hardening O1 Tool Steel Bars

Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel Rods

Oversized Multipurpose Oil-Hardening
O1 Tool Steel Rods and Discs

Hardened
Tight-Tolerance Multipurpose
Oil-Hardening O1 Tool Steel Rods

Hardened Undersized
High-Speed M2 Tool Steel Rods

Hardened Undersized High-Speed
M2 Tool Steel Rod Sets

Hardened Oversized
High-Speed M2 Tool Steel Rods

Oversized High-Speed
M2 Tool Steel Rods

Tight-Tolerance High-Speed
M2 Tool Steel Rods

Hardened High-Speed
M2 Tool Steel Sheets

Tight-Tolerance High-Speed
M2 Tool Steel Bars

Wear-Resistant High-Speed
M4 Tool Steel Bars